5 Reasons to Love the 2013 Ford Edge Door Sensor

The 2013 Ford Edge door sensor is a safety feature that alerts drivers when the doors are open.

2013 Ford Edge Door Sensor

The 2013 Ford Edge Door Sensor is an innovative and versatile feature found on the Ford Edge, providing drivers with a unique sense of security. Using radar-based active sensing, the Door Sensor notifies you when a door has been opened or closed without being commanded to do so. This provides extra security to drivers who are concerned about authorities or force entry from external sources. The Door Sensor also helps parents monitor the safety of their children who may be playing near the vehicle. With this advanced feature, you can remain in control of who enters or exits your vehicle while making sure all passengers remain safe.

Technical Specifications

The 2013 Ford Edge Door Sensor is an electronic device designed for use in the vehicles of the Ford Edge series, models from 2013 onwards. It is a two-piece sensor consisting of a base and a magnet, which can detect when the door is opened and closed. The base unit is connected to the cars interior electrical system, while the magnet is mounted on the vehicles door frame. When the door is opened or closed, it triggers a signal from the base to relay information to other components in your car. The technical specifications for this device include voltage range of 5-15V; frequency range of 3 MHz; operating temperature range of -30C to +85C; and dimensions of 72mm x 44mm x 18mm.

The 2013 Ford Edge Door Sensor is compatible with other Ford models and parts are interchangeable with different years of Ford Edge models. However, its important to note that some features may be incompatible with certain models or years, so its best to consult your owners manual before making any changes.

Installation Instructions

Installing a 2013 Ford Edge Door Sensor requires certain tools and steps in order to ensure its proper functioning. Before beginning installation, make sure you have all necessary tools on hand: Phillips screwdriver, flathead screwdriver, 10mm socket wrench, pliers, wire cutters/strippers, electrical tape and heat shrink tubing. Once you have all these tools ready, begin by disconnecting the negative battery cable from your vehicles battery post. Then locate the door frame where you wish to install your sensor and mark out two mounting holes for it using a marker or pencil.

Next drill two pilot holes into your marked spots using an electric drill bit that matches the size of your screws (usually M4). Securely attach one end of your sensor onto the door frame using screws and washers provided with the device. Finally connect one end of your wiring harness into the back side of your sensor while connecting its other end into an appropriate port in your car’s interior electrical system. Make sure all connections are securely tightened before proceeding further. Once installation is complete, you can then reconnect your negative battery cable back onto its post for powering up your new sensor!

Troubleshooting

If you experience any issues with your 2013 Ford Edge Door Sensor after installation or during operation then there are certain troubleshooting steps you can take in order to identify and rectify problems quickly. Firstly check if all connections are securely tightened during installation as loose connections can cause intermittent signals or no signals at all being sent through from the device itself. If no connections appear loose then check if there is any visible damage on either part of the sensor itself such as cracks or corrosion which could be disrupting signals being sent through correctly between both components (base unit + magnet).

Common problems encountered with this particular model include incorrect triggering (door opening/closing too early/late) due to incorrect alignment between both parts; poor sensitivity due to either environmental factors such as dirt build-up on contact points or faulty wiring; false triggering caused by vibrations from nearby sources such as speakers/subwoofers installed within vehicle cabins; low power levels caused by insufficient voltage being supplied through wiring harness etc… In any case these issues can usually be easily resolved by referring back to manufacturer instructions for specific details regarding calibration settings etc…

Maintenance Guide

It’s important to keep up regular maintenance on devices like 2013 Ford Edge Door Sensors in order to ensure their smooth operation over long periods of time without any interruptions or failures occurring unexpectedly during useage.. Here are some key tips for keeping yours running smoothly: Clean off any dirt build-up around contact points between both parts regularly using rubbing alcohol or similar cleaning agents; check wires periodically for signs of wear & tear such as fraying/breaking down due to excessive exposure over time etc… ; check voltage levels supplied through wiring harnesses attached onto each component periodically and replace them if necessary; replace batteries every 2 years even if they appear fully charged as older batteries tend not lose their charge faster than expected over time etc.. Lastly make sure you consult manufacturer instructions when making changes or adjustments so that settings remain consistent throughout usage without causing further problems down the line!

Safety Precautions

When handling any type of automotive component, safety should always be the top priority. This is especially true for the 2013 Ford Edge Door Sensor system, as it is a delicate and important component of the vehicle. Before attempting to work on the door sensor, it is important to ensure that the necessary safety precautions are taken.

The first step in ensuring safety when working on a door sensor is to wear protective gear. This includes eye protection, gloves, and any other items that can help protect against potential hazards such as flying debris or sharp edges. It is also important to make sure that all tools used for this project are in good condition and suitable for the job at hand.

It is also important to be aware of the potential risks associated with working on a door sensor system. Electrical shocks are possible if proper safety protocols are not followed when working with wiring or components related to electricity. Additionally, there is always a risk of damaging components or causing further issues with the vehicle if steps are not taken carefully and deliberately.

Replacement Parts Guide

When it comes time to replace parts for a 2013 Ford Edge Door Sensor system, it is important to understand which options are available and what advantages and disadvantages each presents.

The first option is to purchase genuine parts from an authorized Ford dealer or online retailer. These parts will be identical in quality and function to those originally used by Ford when the vehicle was manufactured, but they may come with a higher price tag than aftermarket options.

On the other hand, aftermarket parts can often provide a cost-effective solution for replacing components in your vehicles door sensor system. However, these parts may not provide identical performance or reliability as genuine parts and there is no guarantee that they will fit correctly without additional modification or adjustment.

Warranty Information

The warranty offered with a 2013 Ford Edge Door Sensor system varies depending on which model year your vehicle was manufactured in and what particular components were included in your vehicle’s original equipment package at time of purchase. Generally speaking, most door sensors come with some sort of limited warranty that covers defects in material or workmanship up to three years from date of sale or ownership transfer (whichever occurs first).

It should be noted that this warranty does not cover any damage caused by improper installation or use outside of recommended guidelines provided by Ford Motor Company (such as excessive force applied during maintenance). Additionally, this limited warranty does not cover incidental or consequential damages caused by failure of any part covered under this agreement (such as lost wages due to inability to drive). Claims must be made within thirty days of discovery of defect for consideration under this warranty program.

Customer Reviews

When considering whether or not a 2013 Ford Edge Door Sensor system will provide satisfactory performance for your particular needs, it can be helpful to read customer reviews from other drivers who have already installed this product on their vehicles. Consumers often share their experiences with products such as these online through forums and review sites so other drivers can make an informed decision before making a purchase themselves.

From customer reviews, one can learn about both positive and negative aspects associated with using this product on their vehicle; including pros such as improved convenience due to quicker unlocking times as well as cons such as difficulty programming due compatibility issues between certain models of vehicles and certain models/manufacturers of sensors systems available on the market today. By reading through various customer reviews online, one can gain valuable insight into how well this product might work for them before making an investment into their own car’s security system upgrade process.

FAQ & Answers

Q: What are the Technical Specifications of a 2013 Ford Edge Door Sensor?
A: The 2013 Ford Edge Door Sensor is a 4-wire proximity sensor designed to detect when a vehicle door is open or closed. It has an operating voltage of 12V and a power supply of 0.1W. It is compatible with other Ford Models that have the same specifications.

Q: What type of Models are compatible with a 2013 Ford Edge Door Sensor?
A: The 2013 Ford Edge Door Sensor is compatible with other Ford models that have the same specifications, such as those from the Escape, Fusion, and Explorer series. Additionally, it can be used in other models from different brands if they have similar technical specifications.

Q: How to Install a 2013 Ford Edge Door Sensor?
A: Installing the 2013 Ford Edge Door Sensor requires basic wiring knowledge. First, remove any existing door sensors and disconnect them from the wiring harness. Next, connect the new sensor to the wiring harness and secure it in place with screws or bolts depending on your vehicle model. Finally, test the sensor to ensure proper operation before putting everything back together.

Q: How to Troubleshoot Problems with a 2013 Ford Edge Door Sensor?
A: Common problems encountered with the 2013 Ford Edge Door Sensor include improper installation, electrical issues (such as an open circuit or short circuit), or corrosion due to moisture build-up in areas around the sensor. To troubleshoot these issues, first check for any loose connections or damaged wires on both sides of the sensor. If everything looks good then use an ohmmeter to check for continuity between both pins on each side of the connector and look for any shorts or opens in wiring between pins on either side of connector.

Q: What Type of Warranty is offered with a 2013 Ford Edge Door Sensor?
A: The 2013 Ford Edge Door Sensor comes with a one-year warranty that covers any manufacturer defects or failures due to normal wear and tear over time. The warranty does not cover damages caused by improper installation or misuse of the product such as water damage or electrical shocks.

The 2013 Ford Edge is equipped with an advanced door sensor system that helps to ensure safety and security. This system is designed to detect when a door has been opened or closed and can be used to alert the driver if a door is left open or unlocked. The Ford Edge door sensor also helps to improve fuel efficiency by reducing wind drag when the doors are closed. Overall, this advanced door sensor system helps to make the 2013 Ford Edge one of the safest vehicles on the road.