What is the Replacement Cost for a 2014 Ford Explorer PTU?

The replacement cost for a 2014 Ford Explorer PTU is approximately $1,500.

2014 Ford Explorer Ptu Replacement Cost

The 2014 Ford Explorer is a reliable SUV which has been praised for its performance and versatility. However, its power transfer unit (PTU) may occasionally require replacing due to wear or malfunction. The cost of this replacement can vary significantly depending on the parts involved and the applicable labor costs.

The estimated replacement cost of a 2014 Ford Explorer PTU is approximately $700 to $1000. This cost includes labor, parts, oil and fluid charges. If the vehicle is still within warranty, some parts may be covered. However, labor costs will still likely be applicable.

If you’re looking for a lower-cost option, aftermarket or used components are sometimes available for a reduced replacement cost. However the lifespan of these components may not match that of factory originals. Additionally, installation may pose additional challenges and costs that are not present when using new components.

Ultimately, the 2014 Ford Explorer PTU replacement cost is dependent upon individual circumstances; therefore it is important to contact a qualified technician for an accurate estimate before beginning any repair work.

2014 Ford Explorer PTU Replacement Cost

Replacing the Prime Transfer Unit (PTU) of a 2014 Ford Explorer can be a big job, but the rewards are great. The cost savings and knowledge gained by doing it yourself are well worth the effort. In order to replace the PTU, you will need a variety of tools, including some specialty tools and basic hand tools. It is important to understand the advantages and alternatives before attempting this job. In this article, we will discuss the replacement cost of a 2014 Ford Explorer PTU, as well as the required tools and advantages of replacing it on your own. We will also compare the cost of replacing the PTU versus replacing the full gearbox for a 2014 Ford Explorer.

Replacement Cost of 2014 Ford Explorer Prime Transfer Unit (PTU)

When considering the cost to replace a 2014 Ford Explorer PTU, there are two main components to consider: labor costs and parts costs. Labor costs can vary depending on your location and experience level, but generally speaking labor costs for replacing a PTU can range from $500-$1,000. Parts costs can also vary depending on where you purchase them, but they typically range from $200-$500. It is important to shop around for both labor and parts in order to get the best deal possible.

Tools Required to Replace PTU for 2014 Ford Explorer

In order to replace a Prime Transfer Unit (PTU) for a 2014 Ford Explorer model, you will need some specialty tools as well as basic hand tools. Specialty tools include an engine hoist or lift, an adjustable wrench set, ratchet set with sockets and extensions, Torx bit set, pry bar set, punch set, hammer set with various head sizes and shapes for different applications, gear puller set with various sizes for different applications, impact driver or drill/driver with steel bits and screws for corrosion-proofing purposes in certain areas of work being carried out. Basic hand tools such as screwdrivers (both flathead and Phillips head), pliers (needle-nose pliers are especially helpful when removing clips), wire cutters/strippers/crimpers (for any electrical work that needs to be done during installation or troubleshooting), utility knife/box cutter (for cutting through gaskets or other materials that may require precise cutting). All these tools are necessary in order to safely remove old parts in order to properly install new ones without any damage being done either way.

Advantages of Replacing PTU on Own for Ford Explorer 2014 Model

The biggest advantage of replacing your own Prime Transfer Unit (PTU) on a 2014 Ford Explorer model is cost savings. By doing it yourself instead of having it professionally installed by an auto repair shop or dealership service center you could save hundreds or even thousands of dollars in labor costs alone! Additionally there is also knowledge gained from doing it yourself which could be very beneficial in case something else goes wrong with your vehicle down the line that requires similar repairs or maintenance. This could save you time and money in future repairs since you will have more knowledge about what needs to be done instead of having someone else do all that work again at extra cost to you!

Alternatives to Replacing Ford Explorer 2014 Model PTU

If you decide that replacing your own Prime Transfer Unit (PTU) on a 2014 Ford Explorer isnt right for you then there are other alternatives available such as scheduling an appointment at an auto repair shop or dealership service center who will have all necessary equipment needed to complete this task professionally at additional cost than if done by yourself at home due time spent working on vehicle plus cost parts used during process too! Another option would be buying used or remanufactured parts which could potentially save even more money but may not always be reliable which why its important research each option before making final decision!

Cost Comparison Between PTU Replacement and Full Gearbox Replacement for Ford Explorer 2014 Model

When deciding between replacing just the Prime Transfer Unit (PTU) versus replacing the full gearbox for a 2013-2014 Ford Explorer model its important to take into consideration both labor costs as well as parts costs associated with each repair job. Labor costs depend mainly on location so prices may vary significantly depending where repair job being performed however generally speaking labor costs associated with just replacing PTU tend range between $500-$1k whereas full gearbox replacement typically ranges between $1k-$3k due complexity involved plus additional time needed complete entire job correctly first time around! In terms parts used during process replacement just involves one part whereas full gearbox requires many more components so its expected see higher total part costs associated with latter option ranging anywhere between $200-$800+ depending availability quality chosen!

Popular Brands of OE Specified Parts for Ford Explorer 2014 Model

When it comes to replacing parts on the Ford Explorer 2014 model, you want to make sure that you have the right parts. Original Equipment (OE) specified parts are designed specifically for this model and can help ensure that your vehicle continues to run smoothly. Popular brands of OE specified parts for the Ford Explorer 2014 model include filters, control modules and other replacement components. These parts are designed to meet the exact specifications of the manufacturer, and thus should provide a higher quality than generic parts that may be available from other sources.

Removal Procedure for Brake Cables During Replacement of PTU for Ford Explorer 2014 Model

Replacing a Power Transfer Unit (PTU) on your Ford Explorer 2014 model may require removing brake cables as part of the process. To do this safely and correctly, certain steps must be followed. Firstly, the old brake cables must be removed by carefully unclipping them from their mounting points and disconnecting them from any electrical connectors that they may be attached to. Once they are free, they should then be safely stored until needed again. After this is done, new brake cables can then be installed in their place by following similar steps in reverse order. Make sure all connections are secure before attempting to drive the vehicle again.

Risks Associated With Replacing PTU on Own for Ford Explorer 2014 Model

Replacing a PTU on your own can lead to a number of risks that should be taken into consideration before attempting such a task. Firstly, there is always a risk of damaging vehicle components if replacement is done incorrectly or without proper care. In addition, there is also a risk of injury if any tools or components are handled incorrectly during installation or removal procedures. It is important to take all necessary precautions when replacing any part on your vehicle in order to ensure its safe operation afterwards.

Common Issues Experienced After Replacement of PTU in Ford Explorer 2014 Model

Once you have replaced a PTU on your Ford Explorer 2014 model, it is important to pay attention for any potential issues that may arise afterwards. Common problems experienced after replacement include leakages in the system which could lead to further damage if not identified and repaired quickly; as well as noises coming from the engine compartment which could indicate an issue with engine components or other systems associated with it such as cooling system leaks or exhaust system blockages etc. Keeping an eye out for these potential issues will help you identify them quickly and ensure that your vehicle remains in optimal condition going forward.

FAQ & Answers

Q: What is the replacement cost of 2014 Ford Explorer Prime Transfer Unit (PTU)?
A: The cost to replace a 2014 Ford Explorer Prime Transfer Unit (PTU) includes parts and labor. The exact cost of the replacement will depend on the location and the specific part needed.

Q: What tools are required to replace a PTU for a 2014 Ford Explorer?
A: In order to replace a PTU for a 2014 Ford Explorer, both specialty tools as well as basic hand tools are required. The specific type of tools needed will depend on the particular part that needs to be replaced.

Q: What are the advantages of replacing a PTU on my own for a 2014 Ford Explorer model?
A: Replacing a PTU on your own for a 2014 Ford Explorer model offers several advantages, including cost savings and gaining knowledge about your vehicle. Additionally, it can provide assurance that the job is done correctly as you have full control over the process.

Q: What are some alternatives to replacing my Ford Explorer’s 2014 Model PTU?
A: Alternatives to replacing a PTU in your Ford Explorer’s 2014 model include scheduling an appointment with a professional service or buying used or remanufactured parts. Depending on your particular situation, one of these options may be more cost-effective than doing it yourself.

Q: What is the cost comparison between PTU replacement and full gearbox replacement for my Ford Explorer’s 2014 model?
A: The cost comparison between PTU replacement and full gearbox replacement will depend on several factors such as labor costs, parts costs, and other associated expenses. Generally speaking, replacing a PTU is typically less expensive than replacing an entire gearbox due to fewer parts being involved in the process.

The replacement cost of the 2014 Ford Explorer PTU can vary greatly depending on the specific year, model, and trim level of the vehicle. Generally speaking, the cost to replace this part ranges from $150 to $500. It is important to note that labor costs will also be applicable when replacing this part. Additionally, it is recommended that you utilize genuine OEM parts for optimal performance and longevity.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to our product analyst and reviewer platform! We're thrilled to have you here and appreciate your interest in knowing more about us.

Our mission is to provide you with honest and unbiased reviews of products and services, to help you make informed decisions before making a purchase. We understand the importance of finding the right products that meet your needs and budget, and we take that responsibility seriously.

We believe in transparency, honesty, and open communication. Our team of experienced product analysts and reviewers are dedicated to providing you with accurate and comprehensive information about the products we review. We do not accept any payments or incentives from manufacturers or companies to influence our reviews. We conduct extensive research, data comparison and analysis to ensure that our reviews are fair, honest, and unbiased.

Similar Posts