How to Check Transmission Fluid on a 2014 Ford Taurus

To check the transmission fluid in a 2014 Ford Taurus, refer to your vehicle’s owner’s manual for specific instructions.

2014 Ford Taurus Transmission Fluid Check

The 2014 Ford Taurus is a vehicle that requires regular maintenance to keep it running smoothly. One of these essential maintenance tasks is checking the transmission fluid. This guide will provide detailed instructions on how to check and top up the transmission fluid of your Ford Taurus.

Start off by preparing your Taurus for the process. Get your car on level ground and find a safe spot to work on it before you pry open the hood. With the hood propped open, identify the reservoir for the transmission fluid. It should be a yellow cap labeled with ATF (Automatic Transmission Fluid).

Next, remove this cap, preferably using a container in case you accidentally spill some of the fluid that’s inside. Next, look into the reservoir to take stock of how much transmission fluid is present; if there’s enough fluid, then you can move on to closing off your Taurus’ hood and driving away with satisfaction.

If not, you’ll need to purchase some ATF first in order to top up your Taurus’ transmission fluid level. Take out an appropriate amount of ATF which should match what’s currently inside and pour it into the reservoir until it reaches its specified full level. Once this is done, go ahead and close off your Taurus’ hood and enjoy smoother shifting!

General Information about 2014 Ford Taurus

The 2014 Ford Taurus is a full-size sedan that offers plenty of features and amenities for its drivers. Its exterior has a modern and sleek design, with a distinct grille and LED taillights. The interior is spacious and comfortable, with high quality materials and a range of features such as an 8-inch touchscreen infotainment system, SYNC 3 technology, heated and ventilated front seats, dual-zone climate control, and much more. When it comes to safety, the Ford Taurus has you covered with standard front driver and passenger airbags, stability control with rollover mitigation, blind spot alert system, rearview camera system, adaptive cruise control with collision warning system, lane keep assist system and other active safety features.

Maintenance Requirements

Regular maintenance is essential to keep your 2014 Ford Taurus running smoothly. To ensure optimal performance from your vehicle’s transmission fluid system, its important to use the right fluids and filters as recommended by Ford Motor Company. For the 2014 Ford Taurus transmission fluid type its recommended to use Type F automatic transmission fluid (ATF). Its also important to regularly check the transmission fluid level in order to prevent any unexpected problems or damage caused by low or dirty fluids.

Tools and Materials Needed

In order to properly check the transmission fluid level in your 2014 Ford Taurus you will need some specialized tools such as a funnel or measuring cup for measuring out the amount of ATF needed for topping up the system if necessary; in addition to that you will also need rags or towels for cleaning up any spills or messes that may occur during the process. Its also advisable to use only high quality products such as those recommended by Ford Motor Company when carrying out any maintenance work on your vehicles transmission fluid system.

Step-by-Step Procedure

When checking your 2014 Ford Taurus transmission fluid level its important to follow the correct steps in order to ensure accurate results:

How to Check the Transmission Fluid Level?

1. Park your vehicle on level ground and let it cool down for about 10 minutes before beginning any work.

2. Locate the dipstick which is normally located at the front of the engine bay.

3. Remove the dipstick from its tube.

4. Wipe off any dirt or debris from both ends of the dipstick using a clean rag or towel.

5. Reinsert the dipstick back into its tube.

6. Pull out again after waiting a few seconds.

7. Check where on the dipstick marks are located indicating either Full (above) or Low (below) levels of ATF in your vehicle’s transmission.

8 If necessary add more ATF using a funnel or measuring cup until it reaches just above Full mark on dipstick.

How To Change The Transmission Fluid? >>> >>1. Put your car on jack stands so that you can safely access underneath it.
> > > > 2. Locate drain plug at bottom of oil pan under transmission. 3. Loosen drain plug using proper sized wrench. 4. Allow old ATF to fully drain out until flow stops completely. 5. Reinstall drain plug securely with new gasket if necessary. 6. Using funnel pour new ATF into oil pan through fill tube located near bottom of oil pan under transmission until level reaches just above “Full” mark on dipstick.

Tips And Tricks For A Smooth And Hassle Free Process

When checking or changing transmission fluid in your 2014 Ford Taurus it’s important to take some extra precautions before starting any work:

    Preparing The Vehicle For A Fluid Change / Check Make sure that all mechanical components are securely tightened up before starting any work; this includes checking all hoses, cables etc., making sure they are firmly secured; this will help avoid any potential issues during maintenance work later on down line.

      Start With A Clean Area For Working On The Vehicle Make sure that you have prepared an area where you can safely carry out all maintenance tasks without creating too much mess or having too many distractions around you while working on your car; this will help ensure that everything goes according to plan without having unnecessary delays due improper preparation beforehand


2014 Ford Taurus Transmission Fluid Check

Maintaining your vehicle is essential to keep it in optimal running condition. When it comes to the 2014 Ford Taurus, a regular transmission fluid check is important to ensure that the transmission is functioning properly. In this article, we will look at the importance of checking your transmission fluid, the advantages of having a regular maintenance schedule, and frequently asked questions about automatic transmission fluids.

Importance of Checking Transmission Fluid

When it comes to changing or checking your transmission fluid, it is important to do so at regular intervals. This helps ensure that all of the parts in the transmission are properly lubricated and running smoothly. Without proper lubrication, the parts in your transmission can become damaged or worn out prematurely. Additionally, if you do not check and change your fluid regularly, you can end up with a transmission that fails prematurely due to lack of lubrication and maintenance.

It’s also important to note that when checking your fluid levels you should always consult your owner’s manual for specific instructions for how much fluid should be used in a given model year Taurus. Overfilling or underfilling can cause damage to your vehicle’s components as well as potentially voiding any warranties on those components.

Advantages of Regular Maintenance Schedule

One advantage of having a regular maintenance schedule for your Ford Taurus is that it can help prevent any potential damage to the vehicle before it occurs. Checking and changing fluids regularly can help ensure that all parts are running smoothly and efficiently which can potentially save you money in repairs down the line. Regular maintenance can also extend the life of your vehicle as well as help maintain its resale value should you decide to sell it at some point down the road.

Frequently Asked Questions (FAQs)

When it comes to transmission fluids there are some common questions people have about using them on their Ford Taurus:

  • What is Automatic Transmission Fluid?
    Automatic Transmission Fluid (ATF) is a type of oil used in automatic transmissions on cars and trucks. It provides lubrication for moving components inside an automatic transmission.
  • Does it matter what fluid I use for My Taurus?
    Yes, when changing or refilling ATF it’s important to use only fluids approved by Ford Motor Company for use in their vehicles such as Mercon V or Mercon LV.


Checking and maintaining your 2014 Ford Taurus’ automatic transmission fluid is an important part of keeping its performance up-to-date and ensuring its longevity overall. Following manufacturer guidelines when checking or refilling ATF will help ensure that all parts remain properly lubricated and running smoothly so you can get many years out of your vehicle safely and efficiently.

FAQ & Answers

Q: What is Automatic Transmission Fluid?
A: Automatic Transmission Fluid (ATF) is a special, lubricating fluid that is used in vehicles with automatic transmissions. It helps to keep the transmission operating efficiently and also provides protection against wear and corrosion.

Q: Does it matter what fluid I use for My Taurus?
A: Yes, it does matter what type of fluid you use for your vehicle. It is important to use the correct type of ATF for your specific make and model, as different types of fluids can have different viscosities and chemical compositions that can affect your vehicles performance. For example, using the wrong type of ATF in a Ford Taurus could lead to transmission problems.

Q: What kind of maintenance should I perform on my Ford Taurus transmission?
A: Regular maintenance on the transmission system is important in order to keep it running smoothly and efficiently. This includes checking the level and condition of the transmission fluid, as well as changing it regularly according to the manufacturers recommended schedule. It is also important to check other parts of the system such as filters, gaskets, seals, etc., for signs of wear or damage.

Q: How often should I check my Ford Taurus’ transmission fluid?
A: The frequency with which you should check your vehicles transmission fluid depends on its age and usage. Generally speaking, it is recommended that you check it every 3 months or 3,000 miles (4,800 km). However, if you are driving frequently or in extreme conditions (e.g., frequent stop-and-go traffic), then it may be necessary to check more frequently.

Q: How do I go about changing the transmission fluid in my Ford Taurus?
A: Changing the transmission fluid in a Ford Taurus involves draining out old oil from the pan underneath the vehicle and replacing it with new oil through an access point located at the top right side of engine compartment. You will need several specialized tools such as a socket wrench set, transmission fluid pump kit, dipstick/funnel set etc., before proceeding with this task. It’s best to refer to your owner’s manual for detailed instructions on how to change your vehicle’s particular type/model’s ATF.

The transmission fluid of a 2014 Ford Taurus should be checked regularly to ensure optimal performance and longevity. It is important to check the fluid level when the engine is cold and parked on a level surface, as well as perform regular visual inspections. If you notice any signs of contamination, it is important to have it changed as soon as possible. Additionally, it is important to use the correct type of fluid recommended by Ford in order for your vehicle to function properly.

Similar Posts