How to Remove a Speed Limiter on a Bobcat 3400: A Step-by-Step Guide

removing the speed limiter on a Bobcat 3400 can be accomplished by carrying out specific modifications on the engine’s governor.

Bobcat 3400 Speed Limiter Removal

The Bobcat 3400 was made to get things done quickly, but you’re limited by its factory speed limiter settings. Fortunately, with a few simple modifications, you can easily remove the Bobcat 3400 speed limiter and get things moving faster than ever. This guide will provide step-by-step instructions on how to safely modify the settings and gain back control of your machine’s performance. With the right tools and knowledge, you can enjoy faster speeds without compromising on safety.

Overview

The Bobcat 3400 is a popular utility vehicle known for its strong performance and reliable operation. However, some users have reported being limited by the speed of the vehicle when driving it. This can be frustrating to those who are looking to get more out of their Bobcat 3400. Fortunately, there is a way to remove the speed limiter on the Bobcat 3400, allowing for greater vehicle speeds and better overall performance.

What is a Speed Limiter?

A speed limiter is an electronic device that limits the maximum speed of a vehicle. It is designed to ensure that drivers do not exceed certain speed levels while they are operating their vehicles. While this may be beneficial in certain situations, it can also be a hindrance to those who want to get more out of their vehicles.

Why Remove the Speed Limiter?

Removing the speed limiter on your Bobcat 3400 can provide several benefits. First and foremost, it will allow you to drive your vehicle faster than before, meaning you can get where you need to go quicker than before. Additionally, removing the speed limiter will also allow you to take advantage of other performance benefits such as increased acceleration and improved handling.

How to Remove a Speed Limiter on a Bobcat 3400

Removing the speed limiter on your Bobcat 3400 can be done relatively easily if you have access to the right tools and knowledge. The first step is to locate the Vehicle Control Module (VCM) which is located under the hood of your vehicle near the battery compartment. Once you have located this module, you will need to disconnect it from its power source and then remove any screws or fasteners that are holding it in place.

Next, you will need to locate and remove any wiring harnesses connected to the VCM in order to gain access to its internal components. Once this has been done, you should be able to access an internal resistor which controls the maximum speed limit of your Bobcat 3400. To remove this resistor, simply unscrew it with an appropriate tool before replacing it with an alternate resistor that has been pre-set with no maximum speed limitation or with one set at a higher level than what was originally set on your Bobcat 3400’s VCM.

Once all these steps have been completed successfully, simply reconnect all wiring harnesses and reattach any screws or fasteners that were removed during this process before reconnecting the VCM back into its power source so that it can begin functioning again at full capacity without any further limitation on its maximum speed settings.

Introduction

Removing a speed limiter from a Bobcat 3400 requires some technical knowledge and skill. It is not a job for the faint of heart, so it is important to understand what you are doing before you begin. In this article, we’ll explain the process of removing the speed limiter from a Bobcat 3400 in detail, so you can be sure that you are doing it correctly and safely.

Tools Required

Before you begin, it is important to make sure that you have all the necessary tools and supplies. You will need:
* A set of metric sockets and wrenches
* A flathead screwdriver
* A pair of needle-nose pliers
* A hammer or mallet
* A drill and drill bit set
* An adjustable wrench or crescent wrench
* Safety goggles or glasses
* Gloves (optional)
Once you have all these tools, you can begin the process of removing the speed limiter from your Bobcat 3400.

Step 1: Disconnecting the Battery

The first step in removing the speed limiter from your Bobcat 3400 is to disconnect the battery. To do this, locate the negative terminal on your battery (it will be marked with a minus sign) and then use an adjustable wrench to loosen and remove the bolt that holds it in place. Once it is removed, put it somewhere safe where it won’t be disturbed. Then repeat this process for the positive terminal (marked with a plus sign). After both terminals have been disconnected, move on to Step 2.

Step 2: Removing the Air Filter Housing

The next step in removing the speed limiter from your Bobcat 3400 is to remove the air filter housing. To do this, locate the two bolts that hold it in place and use an adjustable wrench or crescent wrench to loosen them. Once they are removed, carefully lift off the housing and set it aside somewhere safe where it won’t be disturbed. Then move on to Step 3.

Step 3: Removing The ECU

The next step in removing the speed limiter from your Bobcat 3400 is to remove The ECU (Engine Control Unit). To do this, locate The ECU (it will be located near The air filter housing) and then use an adjustable wrench or crescent wrench to loosen its mounting bolts. Once they are removed, carefully lift off The ECU and set it aside somewhere safe where it won’t be disturbed. Then move on to Step 4 .

Step 4: Removing The Speed Limiter

Now that The ECU has been removed, you can access The speed limiter which is located inside The ECU itself. To remove it, use a flathead screwdriver to gently pry open The casing of The ECU until you can see inside it. Once inside, locate The speed limiter (it will look like a small black box) and then use needle-nose pliers to disconnect its wiring harnesses before finally using a hammer or mallet to gently tap out The speed limiter itself from its mounting bracket within The casing of The ECU . Finally , put everything back together again in reverse order until everything has been reassembled . Congratulations You have now successfully removed The speed limiter from your Bobcat 3400 !

FAQ & Answers

Q: What is a bobcat 3400?
A: The Bobcat 3400 is an all-terrain utility vehicle that is often used in construction, farming, and landscaping. It is equipped with a four-cylinder diesel engine, four-wheel drive, and a comfortable cab. It has a maximum speed of 25 mph.

Q: What is a speed limiter?
A: A speed limiter is a device that limits the maximum speed of an engine. It can be programmed to restrict the engine to a specific speed, or it can be used to prevent the engine from reaching excessive speeds.

Q: How do I remove the speed limiter from my Bobcat 3400?
A: To remove the speed limiter from your Bobcat 3400, you will need to access the computer system for your vehicle. This can be done by removing the dash panel and accessing the ECU (Engine Control Unit). Once you have access to the ECU, you can then use an OBDII scanner tool to reprogram the settings and remove the speed limiter.

Q: What other parts do I need for removing my Bobcat 3400’s speed limiter?
A: In addition to an OBDII scanner tool, you will need some basic tools such as screwdrivers and wrenches in order to access and remove the dash panel on your vehicle. You may also need additional wiring or hardware in order to properly connect your OBDII scanner tool to your vehicle’s computer system.

Q: Is it safe to remove my Bobcat 3400’s speed limiter?
A: Removing your Bobcat 3400’s speed limiter can be dangerous if done improperly or without proper safety precautions. It is important that you understand how your vehicle works before attempting any modifications or repairs on it. If done incorrectly, it could potentially cause damage or injury. We recommend consulting a professional mechanic for assistance with this kind of work.

The Bobcat 3400 speed limiter can be removed by following the process outlined in the Bobcat 3400 service manual. This process should only be done by a trained Bobcat technician and should be followed carefully to avoid any potential damage to the machine. If done correctly, it is possible to safely and effectively remove the speed limiter from the Bobcat 3400.