Troubleshooting Tips When Your Bolens BL125 Leaf Blower Won’t Start

The first step in troubleshooting your Bolens Bl125 Leaf Blower would be to check the spark plug and connections to ensure that it is receiving a proper spark.

Bolens Bl125 Leaf Blower Won’T Start

If you’re having trouble getting your Bolens Bl125 Leaf Blower to start, don’t worry there are some simple steps you can take to get it up and running. This article will provide an overview of what to do when your Bolens Bl125 Leaf Blower won’t start. First, check the fuel cap for cracks or breaks and ensure the cap is firmly secured. Make sure fuel has been added to the tank and that the carburetor has been properly adjusted or cleaned before starting. You should also check if the spark plug is working and replace it if not. Finally, inspect the air filter and ensure it is clean and unclogged before attempting a start-up. These simple steps could make all the difference in getting your Bolens Bl125 Leaf Blower up and running again.

Problem Description – Bolens Bl125 Leaf Blower – Won’t Start

If your Bolens Bl125 Leaf Blower won’t start, it can be quite frustrating. Before you start troubleshooting, it is important to check that the fuel tank is full and the air filter is clean. Additionally, check the spark plug and ignition system to ensure that everything is functioning properly. If these checks come back negative, then there are a few other things that could be causing the problem.

Troubleshooting Basics – General Guidelines

When troubleshooting any issue with your leaf blower, the best place to start is by doing a thorough inspection of all components to ensure that nothing has become damaged or worn. This includes checking for loose or worn wiring, inspecting for debris and dirt build up in the air filter as well as checking for signs of wear on the spark plug and ignition system. Once all components have been inspected, test each one to ensure that they are functioning properly per manufacturer’s specifications.

No Gas in Tank – Check Gas Level

If there is no gas in the tank, the first step is to check the gas level. If it’s too low or empty then you should fill it up with fresh gasoline before starting any troubleshooting process. Additionally, if you suspect any fuel-related issues such as a blocked fuel line or clogged carburetor then this should also be inspected before continuing with any other troubleshooting steps.

Malfunctioning Carburetor – Clogged Carburetor

If you suspect that your carburetor has become clogged then this should be addressed immediately since this will prevent your leaf blower from starting even if all other components are functioning correctly. Depending on the severity of the clog, you may be able to clean it out using compressed air or a carburetor cleaner but if it’s too severe then you may need to replace or repair your carburetor altogether.

Dirty Air Filters – Inspect Air Filters

The air filters in your leaf blower play an important role in keeping airborne debris from entering into vital engine components and should be inspected regularly for signs of dirt and debris build up which can cause problems with starting and running performance over time. If these filters are found to be dirty then they should be cleaned or replaced depending on their condition before continuing with any other troubleshooting steps.

Electrical Issues – Spark Plug Connections- Wiring & Switches Check

When a Bolens Bl125 leaf blower won’t start, it is important to check the electrical connections and the spark plug. Checking the wiring and switches can help determine if there are any issues that need to be repaired. To begin, you should make sure all wires and connections are secure and free of corrosion. If any of the connections are loose, tighten them with a wrench or use electrical tape to secure them. Once all of the connections have been inspected, it is time to move on to inspecting the spark plug.

The spark plug is critical for starting a leaf blower and should be replaced if it looks worn or has too much buildup on it. To inspect it, remove the spark plug cap and take out the spark plug using an appropriate sized socket wrench. Clean off any debris from around the spark plug then inspect it for wear or corrosion. If you notice any damage or corrosion, replace the spark plug with a new one before attempting to start your leaf blower again.

Prevention of Clogged Air Filters- Maintenance Schedule- Adequate Fuel Supply

In addition to checking electrical components when a Bolens Bl125 leaf blower won’t start, you should also check for clogged air filters as this can cause engine failure as well. Air filters should be checked regularly according to your maintenance schedule so that they do not become clogged with debris which can prevent air from entering your engine properly. Additionally, make sure that you have enough fuel in your leaf blower before attempting to start it as this can also cause engine failure if there is not enough fuel getting into your engine.

If your air filter has become clogged or there isn’t enough fuel in your tank then you will need to replace these components before attempting to start up your leaf blower again. Replace the air filter with a new one that is appropriate for your model of leaf blower according to manufacturer guidelines and fill up your tank with adequate fuel supply so that there isn’t an issue when trying to start up again.

Troubleshoot Electrical Issue with a Multi-meter- Test Voltage Levels- Check Spark Plug Connections

Another way to troubleshoot an electrical issue with a Bolens Bl125 leaf blower when it won’t start is by using a multi-meter which can help test voltage levels in order to determine what may be causing the issue. With a multi-meter, you can measure both AC current (alternating current) and DC current (direct current) which can be used when testing voltage levels in order for you to determine if there may be an issue somewhere within one of these currents which could be causing your leaf blower not to start up properly.

Begin by setting up the multimeter according to manufacturer instructions then connect each probe into each connection terminal while making sure all connections are securely attached and free from corrosion or damage. Once connected, turn on the multimeter and take note of each reading while checking for any irregularities such as low voltages or excessive voltages which could indicate an underlying problem within this section of wiring/connections which could explain why your Bolens Bl125 won’t start up properly. After completing these tests, ensure all connections are securely attached then move onto checking for any issues within the spark plug connections themselves as these could also explain why it won’t turn on correctly.

Priming The Engine Aircraft Style- Adjust The Throttle Lever- Pump The Carburetor Diaphragm

If after troubleshooting electrical issues with a multimeter, checking air filters, ensuring adequate fuel supply and examining spark plugs/connections nothing seems amiss then priming the engine aircraft style may help get things started back up again on your Bolens Bl125 Leaf Blower that wont start properly due its carburetor being flooded out with too much fuel causing misfires in its cylinders when trying starting up again after running out of gas previously due low fuel supply level not being monitored sufficiently beforehand leading this problem occurring in first place until being resolved now through priming procedure being taken right now next step right now!

Start by turning off power supply switch then adjust throttle lever back into idle position while removing cowling cover off top part side surface area where carburetor diaphragm located next beneath cover plate part replacing cover plate back over area after exposing diaphragm underneath part where located just beneath cowling surface area where exposed just now! Next step afterwards involves pumping diaphragm several times manually until feeling resistance point feeling taking place at same time noticing no longer able see gas coming out inside area where exposed just now at same time! Afterwards reattach cover plate back over area after priming procedure done finishing successfully afterwards afterwards! Finally turn power supply switch back on position once more afterwards attempt starting engine once more shortly afterwards!

FAQ & Answers

Q: What is the problem with my Bolens Bl125 Leaf Blower?
A: The problem is that the leaf blower won’t start.

Q: What are the general guidelines for troubleshooting this issue?
A: The first step is to ensure that there is adequate fuel in the tank. If there is not, then check the fuel-related issues such as if the carburetor is malfunctioning or if there are any dirty air filters. Additionally, you should check the spark plug connections and wiring/switches for any electrical issues.

Q: How do I prevent my air filters from becoming clogged?
A: You should maintain a regular maintenance schedule to ensure your air filters stay clean and free of debris. Additionally, make sure to have an adequate fuel supply at all times so that your engine does not become overworked.

Q: How do I troubleshoot any potential electrical issue?
A: To troubleshoot potential electrical issues, you should use a multi-meter to test voltage levels and check spark plug connections. Additionally, you can adjust the throttle lever and pump the carburetor diaphragm in order to prime the engine aircraft style.

Q: What should I do if my Bolens Bl125 Leaf Blower still won’t start?
A: If your leaf blower still won’t start after following all of these steps, then it may be necessary to either repair or replace your carburetor depending on what is causing the issue.

The Bolens BL125 Leaf Blower is a great tool for clearing leaves and other debris from your lawn. Unfortunately, if it won’t start, it can be a frustrating problem to solve. In most cases, the issue is related to spark plug problems or fuel line issues. Before attempting any repairs, it is important to consult the user manual for specific troubleshooting instructions. With the right approach and a bit of patience, you should be able to get your leaf blower working again in no time.

Similar Posts