How to Easily Remove the 2nd Row Seats in a Chevy Traverse

To remove the second row seating of a Chevy Traverse, simply lift up the seat and pull outward on the release buttons located in the floor boarding.

Chevy Traverse 2Nd Row Seat Removal

Removing the second-row seats from a Chevy Traverse is a relatively easy task that should not take more than about 20 minutes. The process consists of loosening and removing a few bolts located in the floor, unplugging the second-row seatbelt, disconnecting the power wiring that runs to the seat. After these steps, you can safely lift out the seat as one piece. When reinstalling the seats, simply reverse these steps and make sure all connections are securely tightened. With just some basic knowledge of your vehicle, anyone can enjoy this easy task and maximize seating flexibility in their Traverse.

Chevy Traverse 2nd Row Seat Removal

Removing the second row seats in a Chevy Traverse is a relatively straightforward job, but it does require some preparation and the proper tools. To ensure that you have the best possible experience when attempting this task, it is important to understand the process and to have all of the necessary tools on-hand. In this guide, well explain what tools are needed, how to disconnect the seat belts and electrical connections, how to prepare your vehicle for seat removal, as well as provide a step-by-step guide for removing your second row seats. Well also provide some tips and suggestions that can make your job easier.

What Tools are Necessary?

The specific tools required will vary slightly depending on the model year of your Chevy Traverse. Generally speaking, you will need an adjustable wrench or socket set, a Phillips head screwdriver, a flat head screwdriver, a ratchet and extension bar if necessary. You may also find it helpful to have a pair of work gloves and a utility knife or box cutter handy.

Overview of the Steps

Before attempting to remove your second row seats in your Chevy Traverse, there are several steps you should take: disconnecting the seat belts and electrical connections; preparing your vehicle for seat removal; locating mount bolts and removing seat brackets; pulling out your seats from the vehicle; and following any tips or suggestions that can make removal easier.

How to Disconnect Seat Belts and Electrical Connections

Identifying the parts is one of the most important steps when attempting this task. It is important to understand where all of the components are located so that you can easily locate them during disassembly. The first step is to locate both of your seatbelts and their respective mounting points where they attach to both sides of each seat. Unscrew each mounting point with an adjustable wrench or socket set until they come loose from their respective mounting points. Once theyre loose, gently pull them off so that they are free from any obstructions or entanglements.
Next, locate all three electrical connections at each end of each seat: two connectors near the bottom front edge (one red/black wire connector and one blue/black wire connector) as well as one connector near where each belt attaches (a gray/black wire connector). Carefully unplug each connection by pressing down on the tab at each end of each connection until it comes loose from its respective mounting point(s). Make sure that these connections remain intact throughout disassembly as they will be necessary for reassembly later on.

Tools Needed for Disassembly

In order for you to successfully perform this task without any issues, it is important that you have all of the necessary tools at hand before beginning disassembly. As mentioned earlier, an adjustable wrench or socket set will be needed in order to unscrew all mounting points related to both seatbelts as well as any other components related to removal such as brackets or screws that may need loosening prior to pulling out your seats from their attachment points within your vehicle’s frame. A Phillips head screwdriver will be necessary in order for you to remove screws located in various areas such as around headrests or underneath armrests if applicable while a flathead screwdriver may be used if needed in order loosen up any stubborn screws associated with removal process itself. It may also be helpful to have a pair of work gloves on hand in order protect yourself from any potential sharp edges during disassembly process while a utility knife or box cutter can assist with cutting away any excess material such as foam padding should there be need for doing so throughout process itself.

Preparing Chevy Traverse for Seat Removal


The next step is preparing your Chevy Traverse prior to beginning removal process itself which involves lowering all headrests associated with second row seating if applicable prior beginning actual removal process itself by pushing down until they click into place before pulling them away from their respective frame mounts via handle located at back side before setting aside safely aside along with rest associated components until reassembling later on if desired.
Additionally ,disconnecting third row seating (if applicable) by loosening screws associated with rear side attachment points ,followed by gently pulling away from their respective anchors .Once both third row seating has been removed ,you should now begin actual removal process itself .

Step by Step Guide for Removing 2nd Row Seats


The first step involves locating all mount bolts which generally located underneath arms rest portion ,as well removable plastic covers accessible by either lifting up arms rest portion otherwise accessible via panel underneath same .Once these are exposed ,you can proceed onto next step which involves actually removing these bolts via adjustable wrench or socket set followed by removing corresponding brackets associated with same .Once these items have been removed ,you should now begin actually pulling away seats themselves away from their respective attachment locations within frame itself.
It is important note here that extra helping hand may needed maneuvering out due size weight involved taking care not injure yourself while doing so .Additionally ,any additional straps clips associated within underside removed prior proceeding onto next steps listed above .

Tips and Suggestions for Ease of Removal


When attempting this task ,there few tips suggestions keep mind help make job slightly easier including using wax soap lubricate mount bolts beforehand help loosen up same prevent rust build up over time without damaging surrounding area simultaneously .Additionally ,having extra person assist maneuvering out due size weight involved taking care not injure yourself while doing so .Lastly using protective gear such goggles gloves recommended performing task reduce potential injury risk .

Reinstalling 2nd Row Seats into a Chevy Traverse

Reinstalling second row seats into a Chevy Traverse is an easy process that can be done in just a few simple steps. First, locate the mount bolts and insert the seat brackets onto them. This is done by securely attaching the brackets to the mounting bolts located in the floor of the Traverse. Once the brackets are in place, slide the seat into position until it locks into place. Make sure to check that all of the bolts and brackets are securely fastened before moving on.

Cleaning and Maintenance After Removing 2nd Row Seats

Once you have finished reinstalling your second row seats, its important to clean up any mess that may have been created during removal. Begin by vacuuming and cleaning up any debris or dirt from around the area where your seats were removed. Then, use a damp cloth to wipe down any areas that may have been exposed during removal, such as floor mats or carpeting. Finally, use an all-purpose cleaner to sanitize any areas that could have come into contact with dirt or grime during removal.

Ways to Utilize Space After Removing 2nd Row Seats

Removing second row seats from a Chevy Traverse can open up additional space for storage or travel items. One way to maximize this newfound space is by installing cargo or pet barriers behind each seat location. This will give you more area for larger items such as suitcases, strollers, pet crates, and more. Additionally, you can create more storage space by adding bins and boxes behind each seat location for smaller items such as toys, books, snacks, etc.

Troubleshooting Issues That May Arise After Removing 2nd Row Seats

Sometimes after removing second row seats from a Chevy Traverse there may be some issues with how they fit back into position. If you experience an unusual creaking noise from piston stabilizers when reinstalling them it could be due to one of two things: either they werent properly seated when reinstalled or they werent tightened enough during installation. To ensure proper seating and tightness of your piston stabilizers when reinstalling them make sure to press firmly on each side of the piston stabilizer while tightening down its corresponding nuts and bolts with a wrench or screwdriver until tightness is achieved without too much force being applied as this could cause damage to your vehicle’s interior components.

FAQ & Answers

Q: What Tools are Necessary for Removing the Second Row Seats in a Chevy Traverse?
A: Removing the second row seats in a Chevy Traverse requires a few tools, including a socket set, flathead screwdriver, and possibly an adjustable wrench.

Q: How Do I Disconnect the Seat Belts and Electrical Connections?
A: To disconnect the seat belts and electrical connections, you will need to locate the parts and use a socket set to remove the bolts. Once removed, gently pull the seatbelts out of their holders. Then, disconnect any electrical connections by unplugging them from their sockets.

Q: What Steps Should I Take to Prepare My Chevy Traverse for Seat Removal?
A: To prepare your Chevy Traverse for seat removal, lower all headrests to their lowest settings. If applicable, also disconnect any 3rd row seats that may be present in your vehicle.

Q: What is the Step by Step Guide for Removing 2nd Row Seats from My Vehicle?
A: The step by step guide for removing 2nd row seats from your vehicle begins with locating and removing the mount bolts that hold the seat brackets in place. Then, gently pull outwards on each seat to remove it from your vehicle.

Q: What are Some Tips and Suggestions for Making Seat Removal Easier?
A: To make seat removal easier, you may want to apply wax or soap on each mount bolt before attempting to unscrew them. You may also want to have an additional person help you maneuver each seat out of your vehicle once it has been disconnected from its mount bolts.

The Chevy Traverse has a fairly simple process for removing the second row seat. The process involves releasing the seat latches, lifting the seat up, and then removing it from the vehicle. With patience and proper technique, the second row seat can be removed quickly and easily.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.

Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)

Similar Posts