Troubleshooting Tips if Your Dodge Dart Won’t Turn Over

The possible cause of a Dodge Dart not turning over could be a failed starter, bad battery or a problem with the ignition switch.

Dodge Dart Wont Turn Over

If you have a Dodge Dart that won’t turn over, you may be experiencing a range of issues. Some of the possible causes can be anything from a dead battery to an issue with the starter motor or fuel system. No matter the reason, it can be an inconvenience and make you feel helpless without your car. Fortunately, diagnosing and fixing the issue–especially if it’s something like a dead battery–shouldn’t take too much time or money. If your Dodge Dart wont turn over, try using this troubleshooting guide to help figure out the issue quickly and effectively.

Starter Motor Issues

When your Dodge Dart won’t turn over, it could be due to starter motor issues. A weak battery or poor electrical connections can be the cause of this problem. If the starter motor isn’t getting enough power, it won’t be able to start the engine. To check for these issues, you’ll need to inspect the electrical system from the battery to the starter motor itself. If you find any faulty components or connections, they must be replaced or repaired before attempting to start your vehicle again.

Ignition Troubleshooting

Another common issue when your Dodge Dart won’t turn over is ignition troubleshooting. Faulty switches, spark plugs and other parts of the ignition system can all cause engine trouble. To diagnose these problems, you’ll need to run a few tests on each component of the ignition system and replace any faulty parts you find. It’s also important to make sure that all of your electrical connections are secure and properly functioning as well.

Fuel Injector Problems

A weak ignition or engine misreading can also be caused by fuel injector problems. When fuel injectors become clogged or damaged, they can prevent proper fuel flow into the engine which will result in a no-start situation. To diagnose this issue, you’ll need to inspect each fuel injector and clean out any clogs that may have built up over time. You may also need to replace faulty fuel injectors if they cannot be cleaned out properly.

Alternator Malfunctions

If your Dodge Dart won’t turn over due to alternator malfunctions, then it could be due to voltage issues or a discharged battery. The alternator is responsible for providing power to all of your vehicle’s electrical components and if it isn’t working correctly then it can cause various issues including difficulty starting your car. To diagnose this issue, you’ll need to check all of the wiring and connections related to your alternator as well as test its voltage output with a multimeter. If any problems are found then they must be repaired before attempting to start your vehicle again otherwise further damage may occur.

Bad Distributor Cap/Rotor Assembly

Finally, bad distributor cap/rotor assemblies can also cause difficulty starting your Dodge Dart if they become worn out or damaged in some way. Symptoms of this type of problem include grinding/crackling noises coming from the engine bay as well as visible damage on the part itself such as cracking or warping from heat exposure over time. To check for any issues related to this component you’ll need to remove it from its mounting and inspect it closely for any signs of damage or wear that could prevent proper operation when attempted starting up again afterwards.

Broken Timing Belt/Chain Malfunctioning

The most common cause of a Dodge Dart not turning over is due to a broken timing belt or chain malfunctioning. The belt or chain is responsible for the crankshaft and camshaft synchronization, so when it malfunctions, the engine wont start. If the belt or chain has been skipping teeth on its exterior, then this indicates that the alignment of the crankshaft and camshaft are out of sync. This will result in the inability of the engine to turn over.

Incorrectly Adjusted Linkage Assembly Jamming Up

Another common cause of a Dodge Dart not turning over is an incorrectly adjusted linkage assembly jamming up. This can restrict movement of certain components within the engine, including throttle response and choke actuation. If this is not addressed quickly, it can prevent your Dodge Dart from turning over properly.

Broken Wiring Harness Corroded Terminals

A broken wiring harness can also be a major culprit behind a Dodge Dart not turning over properly. Corroded terminals or worn-out wires can cause poor contact points between connectors and ultimately result in an inability to turn over correctly. It is important to check for any loose connections or signs of damage before attempting to diagnose any other issues with your vehicle.

Faulty Computer Control Unit Giving Out Wrong Signals

Finally, a faulty computer control unit (ECU) can also be responsible for a Dodge Dart not turning over correctly. The ECU receives signals from various sensors within the engine and sends out commands to control certain functions such as fuel injection and ignition timing. If these signals are incorrect, it can lead to slip codes or error messages when retrieving data flows from the ECU as well as ground level interference causing errors which can prevent your vehicle from starting up correctly. It is important to have any faults with your ECU diagnosed and repaired as soon as possible in order to ensure proper operation of your vehicle.

FAQ & Answers

Q: What are the possible causes of my Dodge Dart not turning over?
A: There are several possible causes for a Dodge Dart not turning over, including starter motor issues, ignition troubleshooting, fuel injector problems, alternator malfunctions, bad distributor cap/rotor assembly, broken timing belt/chain malfunctioning, incorrectly adjusted linkage assembly jamming up, broken wiring harness corroded terminals, faulty computer control unit giving out wrong signals and ground level interference causing errors.

Q: What should I check first when my Dodge Dart won’t turn over?
A: The first thing to check when your Dodge Dart won’t turn over is the battery. Make sure it is charged and that any electrical connections are secure and free of corrosion. If the battery is good then you can proceed with other checks such as ignition troubleshooting, fuel injector problems and alternator malfunctions.

Q: What could be wrong with my starter motor if my Dodge Dart won’t turn over?
A: A possible cause of your starter motor not working properly could be a weak battery or poor electrical connections. You may also need to check for faulty switches or spark plugs that could be preventing the engine from starting.

Q: What would be causing my engine misreading if my Dodge Dart won’t turn over?
A: A possible cause of an engine misreading in a Dodge Dart could be faulty fuel injectors which trigger a weak ignition. You may need to check the fuel injectors and make sure they are functioning properly.

Q: How can I tell if my alternator is malfunctioning if my Dodge Dart won’t turn over?
A: If your alternator is malfunctioning it can cause voltage issues in your vehicle which can lead to a discharged battery and difficulty starting the engine. To diagnose an alternator issue you should use a volt meter to test the voltage across the battery terminals and check for any signs of corrosion on wiring harnesses or connectors.

Based on the information provided, it appears that the Dodge Dart is failing to turn over due to an issue with its starter motor. In order to diagnose and fix this issue, a qualified mechanic or technician should be consulted in order to determine the root cause of the problem and suggest a course of action for fixing it.