Solving the Low Range Problem: How to Troubleshoot a Dodge Durango Stuck in Low Gear

The Dodge Durango may be stuck in low range due to a transmission issue or a defective shifter cable.

Dodge Durango Stuck In Low Range

The Dodge Durango is a popular 3-row SUV from the renowned auto makers, Dodge. In some cases, the Durango can get stuck in low range, preventing it from shifting into higher gear. This issue can be attributed to a wide array of things, including mechanical failure or electrical problems. Fortunately, there are a few simple steps you can take to get your Durango unstuck and running smoothly again.

First and foremost, check to make sure the problem isn’t simply caused by a lack of transmission fluid. A low fluid level usually indicates a leak or clogged filter, and both must be fixed in order to restore efficient operation of your vehicle. If the transmission fluid is at the correct level and there’s no leaking found, then you’ll need to move on to other causes.

The next step is to inspect your Durango’s wiring harness for loose or damaged connections that could interrupt power supply to key components such as sensors and actuators located near the transmission. If any wiring issues are found, then it’s likely there’s an electrical fault that needs repair before normal operation can resume. Finally, it may be necessary to replace certain transmission components that have worn out over time and don’t respond correctly when commanded by the on-board computers and other control systems.

By following these steps, you can diagnose and repair any issues with your Dodge Durango stuck in low range so you can get back on the road without interruption!

Identifying The Problem

The first step in resolving your situation is to identify the underlying cause. If you are stuck in low range, it’s possible that it’s a transmission issue. If you can’t shift out of low range, check for a malfunctioning shift cable or loose linkage connections. It’s also possible that the transmission control module (TCM) is not functioning properly if there are any codes present on the OBDII scan tool.

Diagnosing The Issue

Once the problem has been identified, it’s time to diagnose it. If you suspect a shift cable issue, inspect the linkage and make sure it is securely connected and not damaged or worn out. If the OBDII scan tool indicates any codes, have them diagnosed and resolved by a qualified mechanic or technician.

Finding The Correct Part

If you have determined that part of the transmission system needs to be replaced, then you will need to find the correct part for your Dodge Durango. Start by finding out what type of transmission your vehicle has and what specific model number of parts are compatible with your vehicles year and make. You can find this information on websites such as RockAuto or AutoParts Warehouse which provide detailed information about specific parts for your vehicle model and year.

Replacing The Part

Once you have acquired the necessary replacement part, its time to install it in place of the old one. Before installing any new parts, make sure that all connections are secure and free of debris or corrosion. Once everything is ready, follow the instructions provided in your repair manual or online tutorial videos on how to install the new part correctly.

Testing The System

After replacing the faulty part, test out your Dodge Durango by shifting through all gear ranges before taking it out on a test drive. Make sure that all gears are shifting smoothly without any issues before driving off in order to ensure that everything is working properly and safely before getting on the road again.

Dodge Durango Stuck In Low Range

Troubleshooting the Problem

The first step in troubleshooting the problem of a Dodge Durango stuck in low range is to identify the cause. This can be done by checking for any obvious signs of damage or failure, such as broken or disconnected cables, worn or damaged components, and loose connections. If nothing is found, then it may be necessary to take the vehicle to a qualified service technician for further diagnosis and repair.

Common Causes of Low Range Issues

When troubleshooting a Dodge Durango stuck in low range, there are several common causes that should be considered. These include:

  • Damaged Drivetrain Components: The drivetrain components, such as the transmission and transfer case, can become damaged over time due to normal wear and tear. This can cause them to malfunction, resulting in the vehicle being stuck in low range.
  • Faulty Electronic Controls: Many modern vehicles are equipped with electronic control systems that can malfunction if they become damaged or otherwise fail. This can lead to problems with shifting into and out of low range.
  • Poor Maintenance: Failure to properly maintain your vehicles drivetrain components can lead to problems such as being stuck in low range. For example, if the transfer case fluid becomes too old or dirty it can cause the system to malfunction.

Diagnosing Low Range Issues

Once you have identified potential causes of your Dodge Durango being stuck in low range, it is important to take steps to diagnose the issue further. This typically involves using special diagnostic tools and software to test various components and systems within the vehicle. It may also require taking apart certain parts of the drivetrain system in order to inspect them for damage or wear.

Repairing Low Range Issues

Once you have identified what is causing your Dodge Durango to be stuck in low range, it will then be necessary to perform repairs on whatever component or system is at fault. This may involve replacing worn parts such as bearings and seals, or repairing damaged electrical wiring and connectors. It could also involve replacing an entire component such as a transmission or transfer case if it has been determined that it needs replacing due to age or wear. In some cases, an entire replacement drivetrain system may need installing if it has been severely damaged beyond repair.

FAQ & Answers

Q: What causes a Dodge Durango to get stuck in low range?
A: A Dodge Durango can get stuck in low range if the transfer case is malfunctioning due to low fluid levels, a faulty shift motor, or internal mechanical issues.

Q: How do I know if my Dodge Durango is stuck in low range?
A: If your vehicle is stuck in low range, you will likely notice that it shifts more slowly and that the engine is running louder than usual. You may also experience a shaking or vibration while driving.

Q: How do I fix my Dodge Durango if it’s stuck in low range?
A: To fix your vehicle if it’s stuck in low range, you will need to have the transfer case inspected and repaired by a professional mechanic. This may involve replacing the shift motor or other internal components, as well as refilling the fluid levels.

Q: What are the risks of driving with a Dodge Durango stuck in low range?
A: Driving with a Dodge Durango that is stuck in low range can be dangerous as it may cause your vehicle to experience sudden shifts or stalls while driving. Additionally, this issue can cause permanent damage to your transmission over time if not addressed.

Q: Is there anything I can do temporarily to fix my Dodge Durango if it’s stuck in low range?
A: If your vehicle is only temporarily stuck in low range, you may be able to reset it by turning off your engine for 15-20 minutes and then restarting it. However, this should only be done as a temporary solution until you are able to have the transfer case inspected and repaired by a professional mechanic.

The Dodge Durango can become stuck in low range for a variety of reasons. It is important to properly diagnose the issue before attempting to repair it. In some cases, it can be as simple as a dirty or broken shift cable, while in others it may require more extensive repairs such as replacing the transmission or transfer case. In any case, getting the help of a professional mechanic is recommended to ensure that the problem is fixed correctly and safely.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.

Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)

Similar Posts