How To Increase Your 6-Inch Lift By 2 Inches: A Step-by-Step Guide

Raise the 6-inch lift by adding 2 inches of additional height.

How To Add 2 Inches To A 6 Inch Lift

If you’re looking for an easy way to get a bit of extra lift, adding an additional two inches to your existing 6-inch lift is a great option. Not only is it cost-effective, but it’s also relatively straightforward to achieve. All you need are some basic tools and the right materials. With just a few simple steps, you can successfully add two more inches of lift to your truck or SUV. Here’s how you can do it:

1. Measure the area where the additional two inches of lift will go. Make sure that the measurement is correct and that there will be enough space for the additional lift without compromising other components or interrupting the ride quality.

2. Gather the right materials and tools, including first longer and stronger coils, supplies for adding bushings where needed, shocks for improved ride quality in higher lifts, as well as specialty items such as brake lines and key lock plates that might be required depending on your vehicle model.

3. Carefully remove the existing suspension components from the truck’s frame and set aside for recycling or disposal at a later date. Doing so properly requires jack stands and torque wrenches; be sure to follow whatever instructions were included with any component being removed.

4. Measure out and test fit the components that will replace what has been removed: making sure everything is level before proceeding and double-checking measurements to make sure there are no issues with adding height when all is said and done.
5. Install componentry per instructions provided with each item by securing them into place with new bolts supplied by manufacturers along with any necessary bushings or specifications from earlier measurements in step one above; torque them down according to specified instructions..

6. Replace old shocks/struts as necessarily (not required in all cases but recommended when adding height) with new shocks/struts specifically designed for increased lifts do not use standard shocks/struts created for factory settings (if required). Also put in any specialty items like brake lines or key coils noticed during removal stage (if necessary).

7 Finally jack up all components securely proper floor jack plus jack stands should be used then re-torque componentry before test driving vehicle in a safe area such as empty parking lot using low speed setting, if multiple times needed wait until car cools off just enough (should not be excessively hot). Test drive one stoplight before total re-torque after full drive cycle has been completed – once all looks good enjoy increased heights!

Lifting Tips & Strategies

Accurately measuring and properly performing are essential for any successful lift. When adding 2 inches to a 6 inch lift, it’s important to take the time to measure everything accurately, from the weight capacity to the length of the lift kit. It is also important to follow the manufacturer’s instructions carefully and make sure that your vehicle is compatible with the kit you select.

Detailed Process Of Adding 2 Inches To A 6 Inch Lift

To begin, calculate the required weight capacity and length of your lift kit before beginning installation. After selecting a kit that is suitable for your vehicle, gather all of the necessary tools, such as sockets and ratchets, in order to complete the installation process. For safety reasons, it is important to always wear appropriate clothing and safety gear while installing a lift kit.

Checklist Of Equipment Needed To Accomplish The Task

When adding 2 inches to a 6 inch lift, it is important to have all of the necessary equipment on hand before beginning installation. This includes a suitable lift kit for your vehicle as well as a tool kit containing sockets and ratchets. Additionally, it is essential that you have all of the correct tools for each specific job in order to ensure that everything goes smoothly during installation.

Safety Tips When Installing A Lift Kit

To ensure safety while installing a lift kit, it is important to follow all instructions carefully and never attempt any modifications or alterations without consulting with an experienced mechanic first. Additionally, wearing appropriate clothing and safety gear at all times during installation will help keep you safe from any potential hazards or accidents that may occur during this process.

Brands Offering Reliable 6 Inch Lift Kits

When selecting a reliable 6 inch lift kit for your vehicle, there are many brands that offer quality products at competitive prices. Popular options include Skyjacker Suspensions and Rough Country Suspensions both of which manufacture quality components that can help you achieve your desired result when adding 2 inches to a 6 inch lift.

Making Sure You Have The Right Parts For Installment

When it comes to installing a 6 inch lift kit, it is important to make sure that you have all the necessary parts for the job. One way to do this is to verify compatibility with the manufacturer. Specifically, you should check that your vehicle is compatible with the lift kit and that all the components are included in the kit. Double-checking contents of the kit for missed parts can help you avoid potential problems during installation.

Pros and Cons of Installing A 6 Inch Lift kit

Before deciding to install a 6 inch lift kit, it is important to consider both its pros and cons. On one hand, a 6 inch lift can provide enhanced performance and traction while giving your vehicle a more aggressive and intimidating look. On the other hand, lifting your vehicle can cause issues with stability, steering and suspension components. Additionally, depending on where you live, it may be illegal or require additional modifications in order for you to comply with local laws.

Benefits of Increasing Lift From 6 To 8

If you are looking for even more performance from your vehicle, increasing your lift from 6 inches to 8 inches can be beneficial. With 8 inches of lift, your vehicle will have a more aggressive look and improved traction due to increased ground clearance as well as improved suspension articulation for better performance off-road. Additionally, lifting your vehicle higher will allow for larger tires which provide even more traction on challenging terrain.

Spacers And Blocks As An Alternative To Full Kit Installation

If purchasing an entire lift kit isn’t feasible or desirable, spacers and blocks can be used as an alternative way of increasing your vehicle’s ride height. However, these need to be calculated carefully in order to ensure they are installed properly in order not to put undue strain on any other components such as axle foundations or suspension components. Additionally, blocks should be used in conjunction with spacers in order to strengthen axle foundations when increasing ride height significantly with either method.

FAQ & Answers

Q: What Is The Process Of Adding 2 Inches To A 6 Inch Lift?
A: The process of adding 2 inches to a 6 inch lift involves calculating the required weight capacity and length, following the manufacturer’s instructions, and having the right equipment. Make sure to measure accurately and perform the installation properly.

Q: What Are The Safety Tips When Installing A Lift Kit?
A: It is important to wear appropriate clothing and safety gear when installing a lift kit. Be sure to follow all instructions carefully, as well as any safety warnings from the manufacturer.

Q: What Brands Offer Reliable 6 Inch Lift Kits?
A: Skyjacker Suspensions and Rough Country Suspensions both offer reliable 6 inch lift kits. Be sure to research all available options and determine which one is best for your vehicle.

Q: How Can I Make Sure I Have The Right Parts For Installation?
A: It is important to verify compatibility with the manufacturer before beginning installation. Double check that all necessary parts are included in the kit before starting.

Q: What Are The Benefits Of Increasing Lift From 6 To 8?
A: Increasing lift from 6 to 8 provides several benefits including enhanced performance and traction, as well as a more aggressive look. In addition, spacers and blocks can be used as an alternative to full kit installation.

Adding 2 inches to a 6 inch lift can be achieved by using either a spacer or coil spring lift kit. The spacer is the most economical and easiest to install, however the coil spring kit will give you more ground clearance and improved off-road performance. Whichever route you choose, make sure that all of the necessary components are installed properly for maximum safety and performance.