How To Reset the AWD Light on a Nissan Rogue: A Step-by-Step Guide

To reset the AWD light on a Nissan Rogue, press the odometer reset button while turning the ignition switch to the “on” position.

How To Reset Awd Light On Nissan Rogue

If your Nissan Rogue’s AWD light has been activated and you need to reset it, there are a few steps you can take to get things back in line. First, make sure your Rogue is in “Park” or “Neutral” and that the parking brake is engaged. Then turn the ignition off and wait at least 10 seconds before restarting the engine. This will reset the AWD light. Additionally, check that all of your car’s connections and cables are in proper working condition as they could be impacting how the car reads power coming from the rear axle. If everything looks good then you’re all set! On the other hand, if issues persist or if the problem reoccurs, you may need to contact a qualified technician for further diagnosis and resolution.

Required Tools

Resetting the AWD light on a Nissan Rogue will require a few essential tools, depending on the severity of the problem. Youll need a ratchet set, a flathead screwdriver, some electrical tape and wire cutters. Additionally, you may need a multimeter and several other specialized tools, depending on the complexity of the issue.

Checking The Fuses

The first step is to check all of the fuses associated with your vehicles AWD system. These fuses can be found in the fuse box under the hood. Check each fuse visually or with a multimeter to make sure they are not blown or damaged. Replace any that are blown or damaged with new ones.

Testing The Wiring Harness

Next, you should test the wiring harness for any issues that may be causing your AWD light to stay on. Disconnect each wire from its connection and use a multimeter to test them for continuity. If any wires are not connected correctly or have become corroded, you should replace them with new ones.

Replacing The Sensors

In some cases, your AWD light may be staying on because one or more of your vehicles sensors have failed. To determine if this is the case, use a multimeter to test each sensor individually for continuity and make sure they are all functioning properly. If any of them are not working correctly, you should replace them with new ones before proceeding any further.

Checking The Fluid Levels

The next step is to check all of your vehicles fluid levels and top them off as needed. This includes checking the oil level, transmission fluid level and differential fluid level (if applicable). Make sure all of these levels are topped off before continuing with your reset process.

Clearing The Error Codes

Once all of these steps have been completed successfully, you can now move onto clearing any error codes that may be causing your AWD light to stay on. To do this, connect an OBD-II scanner tool to your vehicles OBD-II port (located underneath the dashboard) and follow the instructions on-screen to clear any error codes that may be present in your vehicles computer system.

Reconnecting The Battery

The last step is to reconnect your battery and start up your vehicle again in order to complete the process of resetting your AWD light on Nissan Rogue. Make sure all connections are tight before attempting to start up your car again; if necessary use electrical tape or wire cutters to secure any loose connections before attempting to start up again.. Once everything has been reconnected correctly and securely start up your car again; if everything was done correctly then your AWD light should no longer be staying on!

Check Your Owner’s Manual

It is always a good idea to consult your owner’s manual when it comes to resetting an AWD light on your Nissan Rogue. The manual can provide detailed instructions on how to reset the light and should be consulted first.

If you do not have access to your owner’s manual, or if it does not provide clear instructions, there are other options available.

Check for Faulty Systems

Before attempting to reset the AWD light, it is important to make sure that all of the systems associated with the AWD are functioning properly. This includes checking for any faults in the system such as loose or damaged wiring, worn parts, or any other issue that could affect the performance of the AWD system.

If you find any faults with the AWD system, they should be addressed before attempting to reset the light. Once all of these issues have been resolved, you can proceed with resetting the AWD light.

Consult With a Professional

If you are still having trouble resetting your AWD light, it is recommended that you consult with a professional mechanic or technician who can help you diagnose and resolve any problems that may be causing your AWD light to stay illuminated.

A professional mechanic will be able to identify any underlying issues that may be preventing you from successfully resetting your AWD light and will have access to specialized tools and diagnostic equipment to help resolve these issues quickly and effectively.

Resetting The Light

Once all of these steps have been taken and any underlying problems have been addressed, you can then proceed with resetting the AWD light on your Nissan Rogue. There are several different methods for doing this depending on what year model Rogue you own, so it is important to follow specific instructions for your particular vehicle model when attempting this process.

For example, if you own a 2016 or newer model Nissan Rogue then you can use the push button start feature located near the drivers seat in order to perform a reset procedure which will turn off the AWD light. If this procedure does not work then there are other methods which can be used depending on what year model Rogue you own; these methods should also be outlined in your owners manual.

FAQ & Answers

Q: How do I reset the AWD light on my Nissan Rogue?
A: You can reset the AWD light on your Nissan Rogue by pulling the fuse labeled AWD from the interior fuse box and then reinserting it after a few minutes. You can also reset the AWD light by disconnecting the negative battery cable for 10 minutes and then reconnecting it.

Q: What is the purpose of an AWD light?
A: The All-Wheel Drive (AWD) light on your Nissan Rogue indicates that there is an issue with your vehicle’s all-wheel drive system. This could be a problem with one of the components, such as a faulty actuator, or it could be a low fluid level in the transfer case.

Q: How do I know if my AWD is working properly?
A: You can check if your all-wheel drive system is functioning properly by driving in different conditions (e.g. on wet roads, in snow, etc.). If you notice any slipping or lack of traction in any of these situations then your AWD system may need to be serviced.

Q: What happens if I don’t reset my AWD light?
A: If you don’t reset your AWD light, then you are likely to experience reduced performance from your vehicle’s all-wheel drive system and potentially serious damage to other components over time. It is important to address any issues that cause an AWD warning light as soon as possible in order to keep your vehicle running smoothly.

Q: How often should I check my AWD system?
A: It is recommended that you check and maintain your all-wheel drive system every 6 months or 10,000 miles (whichever comes first). This will help ensure that any issues are addressed before they become more serious and expensive problems down the road.

The process of resetting the AWD light on a Nissan Rogue involves checking the AWD system, resetting any necessary codes, and running a diagnostic scan. This process should be done by an experienced mechanic to ensure that the problem is properly addressed and that the AWD system has been properly reset. Once the AWD light has been reset, it is important to monitor the system for any future issues and to have it regularly serviced.