How to Make a Successful Jeep WJ Select Trac Swap: A Step-by-Step Guide

The Jeep WJ Selec Trac Swap involves switching between two-wheel drive and four-wheel drive.

Jeep Wj Selec Trac Swap

When it comes to Jeep Wj Selec Trac swap, it is an upgrade of the Jeep Grand Cherokee that enables four-wheel-drive capabilities and increased off-road performance. This upgrade requires some modifications to the control system, including installation of a control module, wiring harness, and ball joint bungs. The Selec Trac swap offers all the same great features of standard four-wheel drive including a limited slip differential, locking axles, hill descent control and Hill Start Assist. This swap will enable a Jeep Grand Cherokee owner to take their vehicle off-roading with improved traction on all surfaces and ensure safe handling under challenging terrain and weather conditions. With this upgrade in place, a Grand Cherokee owner can now truly experience the thrill of off-roading with a more responsive ride.

Jeep WJ Select Trac Swap

What is Jeep WJ Select Trac? It is an advanced four-wheel drive system that was introduced in the 1999 Jeep Grand Cherokee. This system offers a low-speed transfer case with three selectable ranges (2-High, 4-High, and 4-Low). The Select Trac system provides a smooth and efficient transfer of power to all four wheels with the ability to switch between two-wheel drive and four-wheel drive on the fly.

Benefits of Jeep WJ Select Trac include improved traction and control when driving in off-road conditions, improved fuel efficiency when driving on highways or in city environments, and improved control when cornering. Additionally, the Select Trac system offers increased safety as it helps to keep all four wheels in contact with the road surface at all times.

Is It Worth It?

The Jeep WJ Select Trac Swap can be a great upgrade for any Grand Cherokee owner who wants to take their vehicle off-roading or who enjoys more control over their vehicle’s performance. The swap process is relatively straightforward and can be completed in a few hours depending on your skill level. The cost of parts for this modification can vary greatly depending on where you shop and what type of components you choose. In general, however, the cost should be less than $500 USD for most parts including transmission fluid, transfer case fluid, shift linkage kit, gasket set and other components needed for the job.

Process Overview

The process of swapping out your existing transfer case for a Jeep WJ Select Trac unit involves draining the current transfer case fluid, removing the shift linkage from its original position on the transmission housing, unbolting the old transfer case from its mounts and then installing the new unit in its place. Before beginning this process it is important to make sure that all necessary tools are available including an adjustable wrench set, an Allen key set, torque wrench and screwdriver set. Additionally it is important to have replacement fluids ready for both the transmission and transfer case as well as any gaskets if necessary.

Preparation Considerations

When preparing for a Jeep WJ Select Trac swap it is important to consider what type of terrain you will be driving on after completing this modification as each range (2-High/4-High/4-Low) will offer different levels of performance depending on your needs. Additionally it is important that you understand how each range works so that you can choose which one best suits your needs before beginning this process. Furthermore you should make sure that all tools listed above are available before starting this project so that everything goes smoothly during installation.

Required Tools & Materials

To complete a successful Jeep WJ Select Trac swap you will need certain tools such as adjustable wrenches, an Allen key set, torque wrench screwdriver set plus replacement fluids such as transmission fluid and transfer case fluid along with any gaskets if necessary . All these items should be purchased prior to beginning this job so that everything goes smoothly during installation once started. Also make sure to read through any instructions provided with your new parts carefully before beginning work on your vehicle so that you are familiar with how everything fits together before proceeding further into this project .

Step by Step Guide

Before beginning work it is important to make sure all tools are available including an adjustable wrench set , an Allen key set , torque wrench , screwdriver set , transmission fluid , transfer case fluid , gasket set , etc . Once ready begin by draining both fluids from your existing transfer case using either a drain pan or bucket . Next remove shift linkage from its original position on transmission housing using an adjustable wrench or Allen key . Then unbolt old transfer case from mounts using either a socket or box end wrench . Now install new unit into place while making sure all bolts are tightened securely using torque wrench . Finally top off both fluids after installation has been completed according to specifications provided by manufacturer .

< h 2 > Shutting Down System < / h 2 >

Once installation has been completed it is time to shut down system which includes turning off engine , disconnecting battery cables ( negative first ) , then checking for any leaks around area where new unit was installed . If there are no leaks present then reconnect battery cables ( positive first ) and start up engine again . Now test out different ranges offered by new unit while paying attention to any issues such as shaking or vibrating while in motion which could indicate improper installation or incorrect parts used during swap process .

< h 2 > Checking Current Components < / h 2 >

Before replacing current components it is important to check them first so that there are no surprises once work begins such as missing pieces or incorrect size/specifications used when purchasing replacement parts . Items such as shift linkages may need adjustments but these can usually be done easily without needing additional components if done correctly following instructions provided by manufacturer . Also make sure all connections are secure prior to beginning replacement process so that everything goes smoothly during installation once started .

< h 2 > Buying Replacement Components < / h 2 >

When buying replacement components for Jeep Wj Selec Trac Swap it is important to do research beforehand in order ensure best quality parts at most reasonable price possible since cost of parts can vary greatly depending on where purchased from plus type chosen for job at hand . This could mean ordering online through reputable source such as Amazon which often has competitive prices compared local retailers although shipping may add additional costs onto purchase price if not careful when shopping around online stores versus brick & mortar locations near home base location where doing work itself will take place eventually once ready go ahead with project at hand finally !

Troubleshooting Issues with Jeep WJ Select Trac Swap

When it comes to troubleshooting issues with a Jeep WJ Select Trac Swap, the first step is to identify potential problems. There are several common issues that may arise with this type of vehicle, such as an improperly calibrated transmission, or a faulty wiring connection. It is important to take the time to inspect all components of the vehicle to ensure that everything is in proper working order before attempting any repairs.

Once any potential problems have been identified, it is important to take steps to resolve them. Depending on the issue at hand, this could involve replacing worn parts or performing a transmission recalibration. In some cases, it might be necessary to contact an experienced mechanic for assistance.

Advantages of Privacy with Jeep WJ Select Trac Swap

One of the main advantages of privacy when using a Jeep WJ Select Trac Swap is access to private navigation. With this type of system, users can access directions and maps without having their location tracked by third parties. This helps ensure that any sensitive information remains secure and protected from malicious actors.

In addition, the Jeep WJ Select Trac Swap also provides maximum security features for users. It offers advanced encryption technology which helps protect data from being accessed by unauthorized individuals or organizations. This helps keep all personal information safe and secure while driving or navigating around town.

Potential Disadvantages of Privacy with Jeep WJ Select Trac Swap

Although there are many benefits when it comes to privacy when using a Jeep WJ Select Trac Swap, there are also some potential disadvantages as well. For instance, if users do not follow safety guidelines, they could be putting themselves at risk for unsafe driving conditions due to lack of visibility and situational awareness. Additionally, if the system is not properly maintained or calibrated regularly, it can lead to performance issues such as poor fuel economy or decreased acceleration power.

Diagnosis and Repair for Jeep WJ Select Trac Swap

When it comes to diagnosing and repairing a Jeep WJ Select Trac Swap system, there are several steps that must be taken in order to ensure optimal performance and reliability. First and foremost, all faulty components should be identified in order for them to be replaced or repaired accordingly. This could involve replacing worn parts such as spark plugs or performing a transmission recalibration in order for it to run more efficiently.

In addition, regular maintenance should also be conducted on the vehicle in order for it remain in peak condition at all times. This includes changing fluids regularly as well as inspecting all components of the vehicle on a regular basis in order identify any potential issues before they become serious problems down the line. Finally, drivers should always consult with experienced mechanics if they experience any difficulty when attempting repairs on their own so that they can receive professional assistance in resolving any issues that may arise during diagnosis and repair sessions for their Jeep WJ Select Trac Swap system

FAQ & Answers

Q: What is the Jeep WJ Select Trac?
A: The Jeep WJ Select Trac is an all-wheel drive system used in the Jeep Grand Cherokee WJ from 1999 to 2004. It uses a viscous coupling center differential and can shift power from all four wheels for improved traction and handling.

Q: What are the benefits of the Jeep WJ Select Trac?
A: The main benefit of the Jeep WJ Select Trac is improved traction in slippery conditions. It is also capable of sending more power to one wheel than another, allowing for better cornering performance. Additionally, it improves fuel efficiency by allowing the vehicle to run in two-wheel drive mode when possible, saving fuel.

Q: Is it worth it to do a Jeep WJ Select Trac swap?
A: If you are looking for improved off-road performance, then a Jeep WJ Select Trac swap may be worth considering. The swap involves replacing your current system with an aftermarket version that includes differentials that can provide more torque and control when driving off-road. Additionally, if youre looking for improved fuel efficiency or better cornering performance, a swap could provide those benefits as well.

Q: What maintenance is required for a Jeep WJ Select Trac swap?
A: Before beginning any work on a Jeep WJ Select Trac Swap, it is important to ensure that all necessary tools and materials are available and that the current components have been checked and are in good working order. Additionally, proper preparation should be taken before beginning any work on the system such as draining any fluids or disconnecting any electrical components.

Q: What parts will I need if I decide to do a Jeep WJ Select Trac Swap?
A: Depending on what type of aftermarket system you choose, there will likely be several parts that you will need in order to complete the swap. This could include differentials, transfer cases, wiring harnesses, driveshafts and mounting brackets. Additionally, you may need new tires or other accessories depending on what type of terrain you plan on driving on after completing the swap.

The Jeep WJ Selec Trac Swap is a great option for those who want to upgrade their current Jeep WJ with improved off-road performance. The swap involves replacing the existing transfer case with an aftermarket Selec Trac unit, which allows for a more advanced 4WD system. This swap can be done relatively easily and should improve the overall performance of the vehicle.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.

Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)

Similar Posts