Solving the Mystery of Kenmore Elite Model 795 Not Cooling

The Kenmore Elite Model 795 refrigerator is not cooling properly and requires service.

Kenmore Elite Model 795 Not Cooling

The Kenmore Elite Model 795 is a refrigerator designed to keep your food cold and fresh. Unfortunately, as with any appliance, sometimes things can go wrong. If you’re experiencing a cooling problem with your Kenmore Elite Model 795 refrigerator, there are a few steps you can take to diagnose and fix the issue. First and foremost, check the temperature settings to ensure everything is correct. If set too high, adjust the settings accordingly. Then check the condenser coils underneath the fridge they should be clean and properly installed. Finally, if those dont fix the problem, replace any damaged or faulty parts like evaporator fans or condenser fan motors as needed. With proper inspection and maintenance of your Kenmore Elite Model 795 refrigerator, you should have no trouble keeping your food cold and fresh for years to come.

Power Failure

A power failure is one of the most common causes for a Kenmore Elite Model 795 not cooling. When the refrigerator stops cooling, check the power outlet to make sure it is on and that it is receiving power. If the outlet is not functioning properly, be sure to contact an electrician or repair technician as soon as possible to avoid potential food spoilage. If the power outlet appears to be working, then move on to other potential causes.

Electrical Malfunction

An electrical malfunction can be another common cause for a Kenmore Elite Model 795 not cooling. Before attempting any repairs, it’s important to unplug the refrigerator from its power source for safety. Once this is done, inspect all of the electrical wiring and components connected to the fridge. If any of them appear damaged or worn out, contact an appliance repair specialist for further diagnosis and repairs.

Unplugging and Plugging Back In the Fridge

Unplugging and plugging back in a Kenmore Elite Model 795 refrigerator can sometimes help get it back up and running again if there was a temporary problem with its electrical components. Begin by unplugging all cables connected to the fridge before plugging them back in and turning on its power source again. If this does not resolve the issue, move on to other potential causes such as cleaning coils behind the fridge or checking drain hoses at its backside.

Cleaning The Coil Behind The Fridge

A dirty coil behind a Kenmore Elite Model 795 refrigerator can also cause it to stop cooling over time as dust and debris build up in its condenser coils, reducing their effectiveness at transferring heat away from your food items. To clean your coils properly, start by removing shelves and drawers from inside your fridge before sliding off its cover panel that protects its evaporator fan motor assembly located at its backside. Next, use a vacuum cleaner with brush attachment to clear away any dirt and debris from both its condenser coils located at top of fridge and evaporator coils located underneath them before replacing cover panel and shelves/drawers back inside your fridge.

Checking Drain Hose At Back Of Fridge

Another potential cause for a Kenmore Elite Model 795 not cooling is an improperly sealed drain hose located behind it which can lead to water accumulation inside your fridge’s cabinet that may affect performance over time. To check this hose’s condition start by unplugging both ends of it before testing their tightness using an adjustable wrench or pliers if necessary; if they are too loose then tighten them up using thread sealant tape around each end before reconnecting hose ends securely again making sure there are no visible gaps in between them which could allow water leakage during condensation cycles inside your unit’s cabinet interior causing damage over time if not addressed promptly enough after being identified as such issue here in question today..

Replacement Parts For Kenmore Elite Model 795 Not Cooling

If none of these solutions work then you may need to consider replacing certain parts within your Kenmore Elite Model 795 refrigerator such as its motor or relay switch if these are found defective after being tested out by qualified appliance technicians here today when diagnosing what could be causing these issues with your unit here now so don’t hesitate when contacting us about getting help with such matters right away for best results every single time!

Ensure Temperature Settings Are Correct

When it comes to troubleshooting Kenmore Elite Model 795 refrigerator not cooling, one of the first steps is to ensure that the temperature settings are correct. This can be done by checking the internal temperature of the refrigerator against the manufacturer’s specifications. If these temperatures do not match, you should adjust the controls accordingly. This can usually be done by accessing the temperature settings from a digital control panel or a manual dial located on the outside of the refrigerator.

Check Interior Lights of Refrigerator-Door Lights

The next step in troubleshooting a Kenmore Elite Model 795 refrigerator not cooling is to check the interior lights and door lights of your unit. The lighting mechanism may need to be checked for proper operation as well as any broken bulbs that need to be replaced. Additionally, check that any controls related to lighting are functioning properly.

Clean Defrost Drain of Refrigerator

Another important step in troubleshooting Kenmore Elite Model 795 refrigerator not cooling is to clean out the defrost drain. This drain helps remove excess water from the refrigerator and should be kept free from debris. To do this, you should remove any debris from around the drain and then check for correct water levels in order for it to function properly. If there are any blockages or clogs in this drain, they should be cleared out with a vacuum or other appropriate tool before continuing with other troubleshooting steps.

Replacing Compressor or Capacitor if Failed

If all else fails and your Kenmore Elite Model 795 refrigerator is still not cooling, then it may be necessary to replace either the compressor or capacitor if they have failed. To do this, you will need to access the compressor unit and test it using an appropriate multimeter device before replacing it with a new one if necessary. Similarly, you may need to test your capacitor using a multimeter before replacing it if necessary as well.

FAQ & Answers

Q: What could be the possible causes for my Kenmore Elite Model 795 refrigerator not cooling?
A: The possible causes for your Kenmore Elite Model 795 refrigerator not cooling could include power failure, electrical malfunction, and a faulty compressor or capacitor.

Q: How can I unplug and plug back in my fridge?
A: To unplug and plug back in your fridge, locate the power cord at the back of the appliance, then unplug it from the wall outlet. Wait a few minutes before plugging it back in.

Q: How do I clean the coil behind my fridge?
A: To clean the coil behind your fridge, first remove all shelves and drawers from inside. Locate the coil at the back of your appliance near the bottom and use a vacuum cleaner to clear away any dust or debris.

Q: What are some replacement parts for my Kenmore Elite Model 795 refrigerator not cooling?
A: If your Kenmore Elite Model 795 refrigerator is not cooling, some possible replacement parts include a new motor, relay switch, compressor unit or capacitor.

Q: How can I ensure that my temperature settings are correct?
A: To ensure that your temperature settings are correct, first check the internal temperature of your appliance according to manufacturer specifications. Then set the controls accurately to match these specifications.

Based on the information given, it is likely that the Kenmore Elite Model 795 is not cooling due to a mechanical issue related to its compressor. To resolve the issue, it is recommended that the compressor be inspected and repaired or replaced if necessary in order to restore proper cooling.