Solving the Common Problem of Kenmore 70 Series Washer Not Spinning

The Kenmore Washer 70 Series may not be spinning due to a broken belt, faulty motor, or an obstruction in the drainage hose.

Kenmore Washer 70 Series Not Spinning

If your Kenmore Washer 70 Series is not spinning, you may be looking for an answer. There are several potential issues that could be causing this issue. From a faulty lid switch or a broken drive belt, to a clogged pump filter or something more complex, diagnosing the issue can be tricky. Fortunately, there are many resources available to help you troubleshoot and repair the issue. With some patience and perseverance, you can get your washer back in working condition. This overview provides some useful information on how to diagnose and resolve common problems with your Kenmore Washer 70 Series that may be causing it not to spin.

Making Sure the Load is Balanced

When a Kenmore Washer 70 Series stops spinning, the first thing to check is the load size and distribution. If the load of laundry is too large, it will cause an imbalance that prevents the washer from spinning correctly. To make sure that this isn’t the problem, first reduce the amount of laundry in the washing machine. It should be noted that if a single item is too large, such as a blanket or comforter, it can also cause an imbalance and prevent spinning. After reducing or removing some of the clothes, try running a spin cycle again to see if that solved the issue.

Checking the Drive Belts

The next step in troubleshooting a Kenmore Washer 70 Series not spinning is to check on its drive belts. These belts are responsible for transferring power from the motor to other components of the washer so they can move properly during operation. To check these belts, first put on protective gear like gloves and safety glasses as these parts may contain sharp edges or moving components. Then inspect all parts of this assembly system including any pulleys or wheels connected to these belts for signs of wear and tear. If any belts are found to be loose or broken, they will need to be tightened or replaced in order for the washer to spin correctly again.

Examining The Tub Bearing Assembly Components

The tub bearing assembly components are also important when troubleshooting a Kenmore Washer 70 Series not spinning properly. This assembly helps support and stabilize the tub during operation which helps prevent vibration and noise while also allowing for smooth movement during agitation cycles. To inspect this system, first put on protective gear like gloves and safety glasses as these parts may contain sharp edges or moving components. Then inspect all parts of this assembly including any springs, rollers, bushings and bearings for signs of wear and tear as well as any loose connections that could be causing an issue with spin cycles.

Testing The Lid Switch

Finally, testing out the lid switch is another important step in troubleshooting a Kenmore Washer 70 Series not spinning properly. This switch helps ensure that no one opens up the lid while it’s still running so it’s important that it’s functioning correctly at all times. To test this switch out, first locate where it is located inside your washer then use a multimeter to test if there’s still power flowing through it when you press down on it with your finger or use another object like a screwdriver handle to press down on it with more force if needed. If there’s no power flowing through it then you’ll need to replace this component in order for your washer to start spinning again correctly.

Evaluating Motor and Clutch Performance

When a Kenmore Washer 70 Series is not spinning, it is important to evaluate the performance of both the motor and clutch. This can be done by first cleaning any motor connections that may have become dirty or corroded. This can easily be done with a multimeter, ensuring that there is proper connection and continuity between the wires. Once this has been verified, the clutch should then be assessed for performance. The clutch should move freely, allowing for smooth and consistent motion in both directions. If there is any resistance or difficulty in movement, then it may need to be replaced for proper operation.

Inspecting Any Internal Components

In order to properly diagnose issues related to a Kenmore Washer 70 Series not spinning, it is necessary to inspect any internal components that may be causing the issue. Depending on the model of the washer, disassembling certain parts may be required in order to gain access to any potential malfunctioning components. All parts of the internal system should then be analyzed carefully, checking for any signs of wear or damage that could be causing the washer to not spin properly.

Testing Timer and Water Level Settings

At this point it is important to investigate whether or not the timer on your Kenmore Washer 70 Series is functioning properly. This can easily be done by manually advancing through each setting on the timer and ensuring that they are all working correctly. Additionally, you should also check that all water level settings are correct as well, as an incorrect water level can also cause issues with spinning performance.

Verifying Water Inlet Valves are Working Properly

The final step in diagnosing why a Kenmore Washer 70 Series is not spinning correctly is verifying that all water inlet valves are working properly. Each valve should be tested individually by turning them on and off while checking for proper flow of water into the washer tub. If any valves are found to not work correctly then they should immediately be replaced in order to ensure proper operation of your washer unit.

FAQ & Answers

Q: How do I troubleshoot a Kenmore Washer 70 Series Not Spinning?
A: To troubleshoot a Kenmore Washer 70 Series Not Spinning, first check the load size and distribution and inspect the tub suspension system. Then examine the tub bearing assembly components, test the lid switch, evaluate motor and clutch performance, inspect any internal components, test timer and water level settings, and verify water inlet valves are working properly.

Q: How do I make sure the load is balanced?
A: To make sure the load is balanced, check both the size of the load and how it is distributed in the washer. This can help ensure that the washer is not overloaded.

Q: How do I check the drive belts?
A: To check drive belts on a Kenmore Washer 70 Series Not Spinning, inspect them for wear and tear. If necessary, tighten or replace them to ensure proper spinning.

Q: How do I test for lid switch connection?
A: To test for lid switch connection on a Kenmore Washer 70 Series Not Spinning, locate the lid switch and use an ohmmeter to test for continuity between terminals. If there is no continuity when the switch is closed, then it needs to be replaced.

Q: How do I verify that water inlet valves are working properly?
A: To verify that water inlet valves are working properly on a Kenmore Washer 70 Series Not Spinning, test each valve individually with an ohmmeter. If they are not functioning properly they need to be replaced.

After troubleshooting the issue, it appears that the cause of the Kenmore Washer 70 Series not spinning is likely a broken belt or a clogged pump. To determine the exact cause and make any necessary repairs, it is best to contact a qualified repair technician.