Diagnosing Mid 128 PID 84 FMI 9: A Step-By-Step Guide

Fault code Mid 128 Pid 84 Fmi 9 indicates an Exhaust Gas Temperature Sensor Circuit Low Input signal.

Mid 128 Pid 84 Fmi 9

Mid 128 Pid 84 Fmi 9 is an engine diagnostic code detected by a vehicle’s electronic control module (ECM) for that particular engine. It typically indicates issues with the injector control pressure circuit on naturally aspirated diesel engines. This type of fault can be caused by fuel contamination, wiring problems, clogged filters, or worn out injectors or pressure regulators. The ECM will identify the code and illuminate the “Check Engine” light to alert the driver to a fault in the system. Fixing this issue may require professional attention and diagnostic tests, as well as replacement of parts depending on the extent of damage. Taking your vehicle to a qualified service centre is key for resolving this problem and restoring your car’s performance.

Mid 128 Pid 84 Fmi 9

Troubleshooting this issue starts with initial checks and system level checks. These can include checking connectors and wiring harness condition, as well as sensors and switches condition. All these components must be functioning correctly in order to diagnose the issue correctly.

Initial Checks

The first step in resolving this issue is to perform a thorough inspection of all the electrical components, including connectors and wiring harnesses, filters, switches and sensors. If any of these components are found to be faulty or not functioning correctly, then they should be replaced before continuing with the troubleshooting process.

System Level Checks

It is also important to check at a system level for any other potential issues. This includes verifying that all necessary system settings are correct and that the engine is running smoothly. Additionally, it is important to ensure that the fuel system is functioning properly and that the air intake filter is clean and free from debris.

Failed Parts Replacement

If all initial checks have been completed successfully but the issue persists, then it may be necessary to replace any failed parts in order to resolve the issue. In order to do this effectively, it is important to follow a step-by-step procedure when replacing faulty parts. This includes disconnecting power sources from all components before attempting any repairs or replacements. It is also recommended that a visual inspection of all parts involved in the repair should take place before making any changes or replacements.

Cylinder Compression Check

Finally, it may also be necessary to check for cylinder compression in order to determine if there are any potential issues with fuel delivery or spark plug operation. This involves testing each cylinder individually using an appropriate compression tester tool, while paying close attention to readings taken from each individual cylinder when performing the test. If any readings appear too low or too high compared to expected values, then further investigation should take place in order to determine potential causes of this discrepancy. Once all potential causes have been addressed, then it should be possible to confirm whether or not these measures have successfully resolved the original Mid 128 Pid 84 Fmi 9 issue.

ECU Software Update (Flash)

When it comes to Mid 128 Pid 84 Fmi 9, one of the most important tasks is to ensure that the ECU software is up-to-date. This can be done by applying a software update to the ECU. It is important to check that the software update is compatible with the existing ECU, as well as verifying that all necessary content included in the update is present.

Ignition Timing Diagnosis and Adjustment

In order to make sure that Mid 128 Pid 84 Fmi 9 runs properly, it is essential that all components of the ignition system are inspected and all timing parameters are set correctly. This includes checking for any malfunctioning parts and adjusting them if necessary. The procedure for adjusting ignition timing may vary depending on the type of vehicle being serviced, so a professional should always be consulted in order to ensure proper adjustment.

Fuel Pressure and Volume Tests

In order to make sure that Mid 128 Pid 84 Fmi 9 runs properly, it is also necessary to conduct fuel pressure and volume tests. This can be done by using a pressure gauge to measure fuel pressure and a flowmeter to measure fuel volume. If either of these tests show abnormally low or high readings, then something may be wrong with either the fuel delivery system or engine itself and further investigation should be conducted.

Inspection of Fuel Injectors

Finally, inspecting fuel injectors can also help diagnose problems with Mid 128 Pid 84 Fmi 9. This involves looking at the cleanliness of the injectors as well as verifying their proper operation by checking their nozzle movement. If any issues are found during this inspection, then they should be addressed before further testing or repairs are performed on the vehicle.

FAQ & Answers

Q: What is Mid 128 Pid 84 Fmi 9?
A: MID 128 PID 84 FMI 9 is a diagnostic trouble code (DTC) that relates to the engine control module (ECM). This code indicates that there is an issue with the ECM.

Q: How to diagnose MID 128 PID 84 FMI 9?
A: Diagnosing this DTC can be done by performing initial checks, system level checks, inspecting electrical components, replacing faulty parts, checking cylinder compression, doing a flash update on the ECU, inspecting ignition timing and adjustment, testing fuel pressure and volume, and inspecting fuel injectors.

Q: What are the initial checks for diagnosing MID 128 PID 84 FMI 9?
A: The initial checks involve visually inspecting all of the engine components for any obvious signs of damage or wear. This includes checking connectors and wiring harnesses for damage or corrosion and checking sensors and switches for proper operation.

Q: What is involved in replacing faulty parts due to MID 128 PID 84 FMI 9?
A: Replacing faulty parts involves identifying the damaged part(s) and then removing them from the vehicle. The next step would be to replace them with new parts that are compatible with your vehicle’s make/model. Once installed, its important to confirm that the part has fixed the issue.

Q: What is involved in checking cylinder compression due to MID 128 PID 84 FMI 9?
A: Checking cylinder compression involves measuring each cylinders pressure using a compression gauge tester. If there are any low readings on any of the cylinders then you will need to investigate further by checking for potential causes such as excess oil in the cylinders or worn out piston rings.

The Mid 128 Pid 84 Fmi 9 code indicates an issue with the engine control module, which is responsible for controlling fuel injection and air intake. This fault code can be caused by a faulty wiring harness, a defective sensor, or an internal ECM malfunction. It is important to have the proper diagnosis and repair done to ensure optimal engine performance.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.

Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)

Similar Posts