2008 Infiniti G35 Firing Order: Tips to Get the Right Sequence

The firing order for the 2008 Infiniti G35 is 1-2-3-4-5-6.

2008 Infiniti G35 Firing Order

The 2008 Infiniti G35 Firing Order is an important part of the engine’s performance and efficiency. It is a sequence of the cylinders in which the spark plugs fire, creating an air/fuel mixture that is distributed with each ignition cycle. Knowing and understanding this sequence helps to provide an optimum combination of power and efficiency. Many car owners do not know the firing order of their vehicles, but it is important to know it for troubleshooting issues with the engine such as misfiring or stalling. This article provides an overview of the 2008 Infiniti G35 Firing Order, as well as step-by-step instructions on how to find it for any model year.

Engine Specifications

The 2008 Infiniti G35 is equipped with a 3.5-liter V6 engine that produces 306 horsepower and 268 lb-ft of torque. This engine is capable of reaching a top speed of 155 mph. The displacement for this engine is 3,498 cc and its compression ratio is 9.8:1.

Ignition Coil Specifications

The ignition coil for the 2008 Infiniti G35 consists of two coils, each with its own spark plug gap. The gap should be set to 0.043 – 0.047 inches (1.1 – 1.2mm). It is important to make sure that the spark plug gap is correctly set as this will determine the effectiveness of the ignition system and ensure proper engine performance and fuel efficiency.

Firing Order of the 2008 Infiniti G35

The firing order for the 2008 Infiniti G35 is 1-6-5-4-3-2, with the cylinders laid out in a V configuration and rotating clockwise when viewed from above or front left to back right when viewed from below or behind the engine block. To properly install the firing order, first connect cylinder number 1 to its spark plug using a spark plug wire, then connect cylinder number 6 to its respective plug wire, followed by connecting cylinders 5 and 4 in succession, followed by cylinders 3 and 2 in succession respectively. Finally, tighten all connections firmly with a torque wrench to ensure maximum performance.

Spark Plugs Specifications

The 2008 Infiniti G35 requires four spark plugs for proper performance; two double platinum plugs for cylinders 1 and 6, one single platinum plug for cylinder 5, and one standard spark plug for cylinder 4. When installing spark plugs it is important to use anti seize compound on threads before tightening them down with a torque wrench set at 8-10 foot pounds (10-13 Nm). For extended service life, it is also recommended that you replace your spark plugs every 30,000 miles (48,280 km).

Timing Belt/Chain Instructions

The timing belt or chain on the 2008 Infiniti G35 should be tightened to its manufacturer’s recommended torque specifications before starting the engine; typically this will range between 42 – 58 Nm (31 – 43 ft/lbs) depending on your specific model’s requirements. Also ensure that all tensioners are properly identified as some models may require different types of tensioners than others do; refer to your owner’s manual or service manual for more information on this topic.

Coolant System Specification

The 2008 Infiniti G35 requires a specific type of coolant for optimal performance and efficiency. The capacity amount required is 7.6 liters (8.0 US qt) for most models, although some vehicles may require more or less depending on the model. The coolant temperature should be regulated to between 199-220F (93-104C). Any higher or lower temperatures can lead to premature engine wear and damage.

Electrical Components Information

The 2008 Infiniti G35 has several electrical components that need to be identified and maintained in order to ensure proper operation of the vehicle. Fuses identification and resistance values should be checked regularly, as well as any other electrical components that may have an effect on the ignition system functions. Troubleshooting any issues with the ignition system should also be done regularly, as this can help prevent any potential problems from developing further down the line.

Battery Specification

The battery specification for the 2008 Infiniti G35 is dependent on which model is being used. Generally speaking, the capacity needed is between 45Ah-65Ah and the voltage output should be 12V DC. It is important to note that different models may require different battery specifications so it is important to check with an authorized dealer before purchasing a new battery. Safety features of batteries should also be considered when selecting a new one, such as spill containment systems and other measures that can help prevent any accidents or damage from occurring due to faulty batteries.

FAQ & Answers

Q: What is the firing order of the 2008 Infiniti G35?
A: The firing order of the 2008 Infiniti G35 is 1-5-3-6-2-4. The cylinder layout is in a V formation and the rotation direction is clockwise.

Q: What are the engine specifications for the 2008 Infiniti G35?
A: The engine specifications for the 2008 Infiniti G35 are a displacement of 3.5 liters and a compression ratio of 10.3:1.

Q: What type and number of spark plugs are required for the 2008 Infiniti G35?
A: For the 2008 Infiniti G35, NGK Iridium IX spark plugs (PN2667) are required in sets of 6. The installation process involves disconnecting any wiring harnesses, removing old spark plugs and replacing them with new spark plugs, then reconnecting all wiring harnesses.

Q: What are the torque requirements for tightening a timing belt/chain on a 2008 Infiniti G35?
A: The torque requirements for tightening a timing belt/chain on a 2008 Infiniti G35 vary depending on whether it is a belt or chain. For belts, torque values range from 40 to 50 Nm (30 to 37 lb ft). For chains, torque values range from 45 to 60 Nm (33 to 44 lb ft), with tensioners having an additional torque value of 25 Nm (18 lb ft).

Q: What are some safety features associated with batteries in a 2008 Infiniti G35?
A: Some safety features associated with batteries in a 2008 Infiniti G35 include automatic shut off functions in case of overcharging or short circuits, temperature regulation systems to prevent overheating, and shock resistant housing that can protect against sparks or explosions caused by voltage fluctuations.

The firing order for the 2008 Infiniti G35 is 1-2-3-4-5-6. This order is important to ensure that the engine runs smoothly and efficiently, as it ensures that the spark plugs fire in the correct sequence to produce maximum power and fuel economy. It is essential to know the firing order when replacing spark plugs or performing other maintenance on the engine.