2013 Ford Edge: How to Find the Right Wheel Torque Specs

The torque specification for the wheels on a 2013 Ford Edge is 140ft/lbs.

2013 Ford Edge Wheel Torque

The 2013 Ford Edge is a handsome, capable midsize SUV with a smooth ride, excellent performance, and a quiet cabin. With its powerful 2.0L EcoBoost engine and 6-speed automatic transmission, the Edge delivers confident handling and plenty of torque for easy passing and merging. But that’s not all – the Edge offers its signature Torque Vectoring Control to enhance cornering ability even further by adjusting wheel speed under low-traction conditions to help you stay in control. When it comes to maximum torque, the Edge definitely delivers up to 253 lb-ft of torque at an impressive 3,500 rpm. The result is excellent responsiveness on the road that makes driving just that little bit easier.

Types of Wheel Torque for 2013 Ford Edge

The 2013 Ford Edge utilizes two different types of wheel torque front to rear torque and rear tire torque. The front to rear torque is the amount of force used when tightening the lug nuts on the front wheels. This force should be applied in a star pattern to ensure even pressure on all sides of the wheel. The rear tire torque is used when tightening the lug nuts on the rear wheels and should also be applied in a star pattern. This helps ensure that all lug nuts have been tightened evenly and securely.

Tire Size for the 2013 Ford Edge

The 2013 Ford Edge comes standard with P225/65R17 tires, however an optional size of P235/65R18 is available for those looking for more stability or performance from their vehicle. Both sizes provide excellent grip in dry, wet and snowy conditions, allowing for improved handling and control while driving.

Methods of Applying the Wheel Torque for Ford Edge 2013

The wheel torque can be applied to the 2013 Ford Edge using either a manual or automated method. Manual methods involve using a wrench or ratchet set to tighten each lug nut in a star pattern until it reaches its specified torque value (measured in foot-pounds). Automated methods involve using an impact wrench which uses a hammering action to quickly reach the specified torque value with minimal effort.

Wheel Bolts and Nuts for 2013 Ford Edge

The bolts used on the 2013 Ford Edge are M14x1.5x45mm and should be tightened to 41 ft-lbs (55 Nm) of torques using a cross patterned tightening method. The nuts are M14x1.5mm and should also be tightened to 41 ft-lbs (55 Nm). It is recommended that you use new bolts and nuts when replacing your wheels, as reused bolts may not have enough grip to keep your wheels secure at higher speeds or under extreme conditions such as off-roading or racing applications.

Wheel Spacers for the Ford Edge 2013

Wheel spacers are an optional accessory that can be installed onto your vehicle’s wheels in order to adjust the track width or offset of your wheels. Applied spacer measurements will vary depending on what type of spacers you choose, however most spacers will range from 0mm 5mm in thickness. Benefits of using spacers include improved cornering ability due to increased stability, improved braking performance due to increased traction, as well as improved handling due to reduced body roll/swaying motions when taking sharp turns at high speeds.

Tools Needed to Apply Wheel Torque on a 2013 Edge Ford

Applying wheel torque on a 2013 Ford Edge requires several tools. These include wrenches and an impact driver. Wrenches come in various shapes and sizes, including open-ended, box, adjustable, and flare nut styles. Each type of wrench has its own purpose and can be used to tighten nuts or bolts of different sizes. An impact driver is a power tool that uses an electric motor to spin a hammer-like mechanism which helps to exert more force when tightening the wheel nuts or bolts.

Advantages of Tighter Wheel Torque on a 2013 Edge Ford

Tightening wheel torque on a 2013 Ford Edge can bring several advantages for the vehicle owner. The most important advantage is improved safety as tighter wheel torque helps to ensure that the wheels stay firmly attached to the vehicle and do not come loose during driving conditions or any other type of disruption. Additionally, tighter wheel torque also provides better handling characteristics as it allows for improved traction between the tire and road surface, improving maneuverability and control in both normal and extreme driving conditions.

Proper Way of Tightening Lug Nuts on a 2013 Edge Ford

The proper way of tightening lug nuts on a 2013 Ford Edge requires following certain guidelines. The first step is to hand-tighten each lug nut individually until they are all snugly in place. This helps ensure that each nut is securely attached before any further tightening takes place. After hand-tightening, torqueing guidelines should be followed in order to properly tighten the lug nuts to their optimal level. Generally, this involves using a torque wrench and applying pressure at specific intervals until all lug nuts are tightened according to their specific levels as indicated by the manufacturer’s specifications.

Inadequate Wheel Torque Causes on a 2013 Ford Edge

Inadequate wheel torque can have several negative effects for those who drive a 2013 Ford Edge. One common issue is uneven tire wear due to insufficient pressure being applied when tightening the lug nuts or bolts on each wheel. This can lead to premature wear on certain portions of the tires which can decrease their overall life span as well as negatively affect performance characteristics such as braking distance or fuel efficiency depending on how severe the wear is present. Additionally, inadequate wheel torque can decrease vehicle performance overall due to reduced steering response and control when taking sharp turns at higher speeds or other extreme driving conditions where more force is required from each tire in order to maintain stability while maneuvering.

FAQ & Answers

Q: What are the types of wheel torque for 2013 Ford Edge?
A: The types of wheel torque for 2013 Ford Edge are Front to Rear Torque and Rear Tire Torque.

Q: What is the standard tire size for the 2013 Ford Edge?
A: The standard tire size for the 2013 Ford Edge varies depending on the trim level and options chosen.

Q: What are the methods of applying the wheel torque for a Ford Edge 2013?
A: The methods of applying wheel torque for a Ford Edge 2013 include a manual method and an automated method.

Q: What tools are needed to apply wheel torque on a 2013 Edge Ford?
A: Tools that are needed to apply wheel torque on a 2013 Edge Ford include wrenches and an impact driver.

Q: What are some advantages of tighter wheel torque on a 2013 Edge Ford?
A: Some advantages of tighter wheel torque on a 2013 Edge Ford include improved safety benefits and better handling characteristics.

The 2013 Ford Edge has a wheel torque of 145-155 ft-lbs, depending on the trim level. This torque is suitable for most everyday driving needs and will allow for a comfortable ride. However, if you are planning to do any off-roading or other activities that require more power, it is recommended that you check the manufacturer’s specifications for higher torque ratings.