What to Do if the ABS and Traction Control Lights Come On in Your 2013 Ford Escape

ByLiberty Is Viral Desk Blog

The ABS and Traction Control light on a 2013 Ford Escape needs to be checked by a mechanic to determine the cause of the issue.

2013 Ford Escape Abs And Traction Control Light On

The 2013 Ford Escape can unexpectedly display lights on its dashboard, with the ABS and Traction Control Light being two of these. If these two lights are both illuminated, the owner of the Ford Escape should take immediate steps to investigate further. This type of issue needs to be addressed promptly in order to ensure safe driving conditions, as traction control and anti-lock brakes are essential safety components in a vehicle.

To troubleshoot a potential issue with these lights, an inspection of key components may be necessary. These include brake lines and hoses, wheel brakes and calipers, wheel speed sensors, pressure modulator valves and more. Testing should also be conducted on brake fluid supply levels, air pressure and other important factors which can impact ABS brakes and traction control performance on a 2013 Ford Escape.

In conclusion, the moment you spot ABS and Traction Control Lights lit up on your dashboard is one that should not be taken lightly. Be sure to investigate what has caused it so that you can drive safely once again. Knowing what has triggered this alert will save time and money by allowing you to have an efficient repair process if needed.

What is ABS?

ABS stands for Anti-lock Brake System. It is a system that helps the driver maintain control of the vehicle during sudden braking by preventing the wheels from locking up. The system works through a series of sensors on each wheel, which detect when a wheel is about to lock up and then applies the brakes on that wheel to prevent it from happening. This allows the driver to maintain control of the vehicle, even when braking hard.

What is Traction Control?

Traction Control is a technology designed to help drivers maintain control of their vehicles in slippery conditions. The system works by detecting when one or more of the wheels begins to slip and then applies brakes on that wheel or wheels in order to restore traction. This prevents the vehicle from spinning out or sliding off course, allowing the driver to maintain control in less-than-ideal road conditions.

Why Does My 2013 Ford Escape Have ABS and Traction Control Lights On?

The ABS and Traction Control lights on your 2013 Ford Escape indicate that something has gone wrong with one or both systems. It could be due to an issue with one of the sensors, damage to a component, or a problem with wiring or connections. In any case, it’s important that you have your vehicle checked out by an experienced technician as soon as possible in order to ensure that your safety systems are functioning properly.

Introduction

The 2013 Ford Escape is a popular crossover vehicle that is known for its reliability and safety. Unfortunately, some models have experienced an issue with their Anti-Lock Brake System (ABS) and Traction Control Light coming on. This can be an alarming issue, as it can indicate a potential safety problem if the brakes are not operating correctly.

In this article, we will discuss the potential causes of the ABS and Traction Control Light coming on in the 2013 Ford Escape and how to fix them. We will also provide some tips on how to prevent this issue from occurring in the future.

What is ABS?

Anti-Lock Braking System (ABS) is a system designed to help drivers maintain control of their vehicles during emergency braking by preventing wheel lockup. It does this by using sensors to detect when a wheel is about to lock up and then rapidly applying and releasing brakes to prevent wheel lockup. ABS can help reduce stopping distances in emergency braking situations, as well as helping drivers maintain control when they need to brake suddenly.

What is Traction Control?

Traction Control is another system that helps drivers maintain control of their vehicles in slippery conditions. It does this by detecting when one or more of the wheels are slipping and then reducing power to those wheels or applying brakes to them until traction is regained. This helps keep the vehicle from sliding or spinning out of control, which can be very dangerous in certain conditions.

Common Causes for ABS & Traction Control Lights Coming On

There are several common causes for the ABS & Traction Control lights coming on in the 2013 Ford Escape:

  • Faulty Wheel Speed Sensors: The wheel speed sensors are responsible for detecting wheel lockup while braking and then sending a signal to the ABS module so it can apply/release brakes accordingly. If one or more of these sensors fail, it can cause the ABS light to come on.

  • Low or Contaminated Brake Fluid: Low brake fluid levels or contaminated/dirty brake fluid can cause your brake system components not to work properly, which can result in your ABS light coming on.

  • Faulty ABS Module: The ABS module controls the entire anti-lock braking system and if it fails, it will cause your ABS light to come on.

  • Corroded Connections: Corroded connections between various components of your braking system can cause an electrical fault that triggers your ABS light.

  • Worn Brake Pads: If your brake pads become excessively worn, they may no longer be able to stop your vehicle quickly enough during emergency braking situations, causing your ABS light to come on.

  • Bad Wheel Bearings: Bad wheel bearings can cause your wheels not spin freely under heavy loads or severely curved roads which triggers traction control light.

How To Fix The Issue?

If you have experienced an issue with your 2013 Ford Escapes Anti-Lock Braking System (ABS) or Traction Control Light coming on, there are several steps you should take in order to fix it:

  1. Check The Wheel Speed Sensors: The first step you should take when diagnosing this issue is checking all four wheel speed sensors for proper functioning by using an OBD scanner tool.
  2. Check The Brake Fluid Level & Condition: Make sure that all four tires have sufficient brake fluid levels and that there isn’t any contamination present.
  3. Inspect The Connections: Inspect all electrical connections between various components of your braking system for any corrosion or loose connections.

    FAQ & Answers

    Q: What is the cause of the ABS and Traction Control Light being on in a 2013 Ford Escape?
    A: The ABS and Traction Control Light being on in a 2013 Ford Escape can be caused by a few different issues. The most common cause is a faulty wheel speed sensor or wheel bearing, which can be repaired or replaced. Another potential cause could be an issue with the ABS pump or module, which may need to be reset or replaced.

    Q: How do I reset the ABS and Traction Control Light on my 2013 Ford Escape?
    A: To reset the ABS and Traction Control Light on your 2013 Ford Escape, you will need to access the vehicles onboard diagnostic system using a compatible scan tool. Once connected, you can reset any fault codes that are causing the light to come on.

    Q: What happens if I drive my 2013 Ford Escape with the ABS and Traction Control light on?
    A: Driving your 2013 Ford Escape with the ABS and Traction Control light on is not recommended as it could cause further damage to your vehicles braking system. You should have your vehicle inspected by a certified technician as soon as possible to determine what is causing the light to come on.

    Q: Are there any warning signs before the ABS and Traction Control light comes on in a 2013 Ford Escape?
    A: Yes, there are several warning signs that can indicate that there may be an issue with your vehicles braking system before the ABS and Traction Control light comes on. These signs include excessive brake pedal vibration when braking, brakes feeling spongy when applied, and unusual noises coming from one or more of your wheels when braking.

    Q: What is the cost of repairing an issue with my 2013 Ford Escape’s ABS and Traction Control system?
    A: The cost of repairing an issue with your 2013 Ford Escapes ABS and Traction Control system will depend on what exactly is causing it. If it is something like a faulty wheel speed sensor or bearing, then it may only cost a few hundred dollars to repair. However, if it is something more serious like an issue with the module or pump then it could cost several thousand dollars to repair.

    The 2013 Ford Escape may have an ABS and traction control light on due to a faulty brake system, a faulty wheel speed sensor, or a computer system malfunction. It is important to have the vehicle inspected by a qualified mechanic to diagnose and repair the issue in order to ensure safe operation of the vehicle.

    Author Profile

    Liberty Is Viral Desk
    Liberty Is Viral Desk
    Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.

    Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)

Similar Posts