Solving the Mystery of a 2013 Ford F150 AC Not Blowing Cold

The most likely cause is a low refrigerant level within the system, so it needs to be recharged.

2013 Ford F150 Ac Not Blowing Cold

The 2013 Ford F150 air conditioner is a great choice for keeping you cool on hot summer days, but occasionally it can stop blowing cold air. This could be because of an issue with refrigerant levels, a broken compressor or blocked hoses. It’s important to find the source of the problem, so you can have it fixed properly by a qualified technician before the summer heat sets in. Thankfully, some common causes of AC failure can be easily diagnosed and repaired at home with minimal effort and cost. Learn more about troubleshooting the Ford F150 AC system and how to get your air blowing cold again!

Troubleshooting

The first step in troubleshooting a 2013 Ford F150 air conditioning system that is not providing cold air is to check the blower motor. The blower motor is responsible for providing the necessary air flow for proper cooling. It is important to make sure that the blower motor is working correctly and is not blocked or clogged with debris. If the blower motor appears to be working properly, then it is necessary to move on to other components of the system for further diagnosis.

Vehicle Inspection

Once the blower motor has been checked and found to be functioning properly, it is necessary to visually inspect all of the other components of the system. This includes checking all hoses, connections, and other visual components. Additionally, it may be necessary to identify any required replacements such as filters or other parts that have become worn or damaged over time.

Disassembly Instructions

In order disassemble and inspect the interior components of a 2013 Ford F150 air conditioning system, it may be necessary to remove the dash panels and any related trim pieces in order to gain access. Once these items are removed, then it will be possible to remove the blower motor assembly for further diagnosis.

Diagnose The Problem

Once all of these components have been removed from the vehicle, it will then be possible to diagnose any additional problems within the system by testing electrical connections and inspecting specific parts such as thermostats and pressure clutches. If any of these components are found to be faulty or worn out, then they will need replaced before continuing with repairs.

Replace Parts

If any parts within a 2013 Ford F150 air conditioning system need replaced after diagnosing a problem, then they should be replaced with OEM parts only in order ensure proper fitment and performance. This may include replacing a blower motor assembly as well as pressure clutches and thermostats if necessary in order restore proper function of an air conditioning system on a Ford F150 model year 2013 or newer.

Reassemble Components

The first step to get the 2013 Ford F150 AC back to working order is to reassemble the components. This involves installing the protector plate and reattaching the dash panels. This should be done carefully, as improper installation can cause further damage and reduce the effectiveness of the AC system.

Refill Refrigerant Circuit System

The next step is to refill the refrigerant circuit system. This begins by recovering any remaining refrigerant from the system, followed by a thorough vacuum with gauges. The vacuum ensures that there are no air leaks in the system that could reduce its efficiency. Once this is done, it is safe to add new refrigerant to the system and test for leaks.

Leak Test/Add Refrigerant

To complete the leak test, use soap bubbles or a specialized leak detector fluid around all connections in the system. If any bubbles or fluid appears, tighten all connections and repeat until no leaks are detected. Once there are no leaks present, it is safe to add refrigerant according to manufacturer specifications for your particular model of 2013 Ford F150 AC unit. Make sure that you do not overfill, as this can cause a significant decrease in efficiency and performance of your AC unit.

Clear Fault Codes and Recalibrate System

The final step before testing your 2013 Ford F150 AC unit is to clear any fault codes that were stored during diagnosis or repair work, as well as recalibrate the system if necessary. To do this, disconnect your battery and then reconnect it after a few minutes have passed. You must then clear all stored codes before attempting to operate your AC unit again. If your model requires recalibration, follow all instructions provided by your manufacturer in order to ensure proper operation of your AC unit when finished

FAQ & Answers

Q: What should I do if my 2013 Ford F150 AC is not blowing cold?
A: First, you should troubleshoot the issue. Visually inspect the components and identify if any replacements are required. Then, remove the dash panels and blower motor assembly in order to diagnose the problem. Test any electrical connections and check the thermostat and pressure clutch. If necessary, replace these components. Reassemble the parts and refill the refrigerant circuit system by recovering refrigerant from it and vacuuming it with gauges. Perform a leak test, add refrigerant to the system, clear fault codes, and recalibrate it.

Q: How do I diagnose my 2013 Ford F150 AC?
A: Begin by removing the dash panels and blower motor assembly in order to access all of the necessary components. Test any electrical connections for any potential problems and check the thermostat and pressure clutch for signs of wear or malfunctioning.

Q: How do I replace parts on my 2013 Ford F150 AC?
A: Replace any necessary components such as a blower motor assembly or pressure clutch and thermostat before reassembling all of the parts back into place. Make sure that you install a protector plate before reattaching all of the dash panels onto your vehicle again.

Q: How do I refill my 2013 Ford F150 AC refrigerant circuit system?
A: Start by recovering all of the refrigerant from your vehicles system using specialized tools designed for this purpose before vacuuming it with gauges in order to ensure that it is properly filled with enough air conditioning gas or liquid refrigerant needed for operation.

Q: How do I clear fault codes from my 2013 Ford F150 AC?
A: Disconnect your car battery first before reconnecting it to reset all stored codes in your vehicles system before recalibrating them for optimal performance once again.

The 2013 Ford F150 AC may not be blowing cold due to a few different possible issues. The most likely cause is a faulty compressor or other AC system component, however the issue could also be caused by low refrigerant levels, an electrical component failure, or an obstruction in the air flow. In order to accurately diagnose and repair the issue it is best to take the vehicle to a certified Ford mechanic.