Where to Find the 2014 Dodge Durango 3.6 Coolant Temperature Sensor

The coolant temperature sensor for the 2014 Dodge Durango 3.6 is located on the engine block near the thermostat housing.

2014 Dodge Durango 3.6 Coolant Temperature Sensor Location

The coolant temperature sensor location in one’s 2014 Dodge Durango 3.6 is generally located near the firewall of the vehicle. It’s important to note that it can be a challenge to replace or access this component, depending on the setup of the engine and its design. To ensure proper installation, it’s best to have an experienced mechanic do the job. If you’ve identified that this specific sensor needs replacing, you can easily find the exact location in your vehicle’s maintenance guide or online. To avoid damage to other parts of your engine and ensure a successful installation, please ensure you follow all manufacturers’ instructions when replacing or accessing the coolant temperature sensor on your 2014 Dodge Durango 3.6.

Overview Of Coolant Temperature Sensor

The coolant temperature sensor is an essential component of any vehicle, and the Dodge Durango is no exception. It helps to monitor the temperature of the engine coolant, and can alert the driver when it is too hot or too cold. In this article, we will be discussing the location of the coolant temperature sensor in a 2014 Dodge Durango 3.6L Pentastar Engine, as well as how to replace it if necessary.

Early Models Coolant Temperature Sensors

The pre 2010 Dodge Durango models were equipped with two coolant temperature sensors; one located in the left side of the engine block, and one located in the radiator hose. The left side sensor was used to measure engine coolant temperature and was connected to a mechanical gauge on the dashboard. The right side sensor was used to measure water temperature in the radiator hose, and was connected to an electric fan control circuit for automatic cooling fan control.

Late Models Coolant Temperature Sensors

In 2011-2014 Dodge Durango models equipped with either V6/V8 or WD 4.7L/5.7L engines, there is only one coolant temperature sensor located in the left side of the engine block near cylinder 3 or 4 (depending on model). This single sensor serves both purposes mentioned above; measuring engine coolant temperature and controlling electric fan operation.

For 2011-2014 models with a 3.6L Pentastar Engine, there are two sensors; both of which are located in the left side of the engine block near cylinder 3 or 4 (depending on model). The first sensor measures engine coolant temperature and is connected to a mechanical gauge on the dashboard like earlier models; while its companion measures water temperature in the radiator hose for automatic cooling fan control like late models described above.

Replacement Process Of Coolant Temperature Sensor

If you find that your 2014 Dodge Durangos coolant temperature sensor needs replacing, here is what you need to do:
Gaining Access To The Sensors Location: First off you will need to gain access to your cars engine bay so that you can locate and remove your existing sensors. Depending on your vehicles make and model this may require some disassembly of other components such as air intake systems or accessories mounted near your cars battery box area before you can access them properly.
Removing The Existing Sensor: Once you have gained access to your existing sensors location you can then begin removing them from their mounting points using appropriate tools such as a socket wrench or screwdriver depending on what type they are mounted with. Make sure that you have disconnected any wiring attached before attempting removal; failure to do so may cause damage or interfere with proper operation once replaced.

Troubleshooting A Faulty Coolant Temperature Sensor

If your 2014 Dodge Durangos coolant temperature sensor starts malfunctioning there are several steps that you can take in order to diagnose and troubleshoot it correctly: Diagnostic Trouble Code (DTC) For Failed Sensor: If your vehicle is equipped with an OBD-II system then it will likely throw up a code whenever something fails within its system including failed sensors such as this one! You can use any compatible scan tool such as an ELM327 scanner adapter, along with appropriate diagnostic software program such as ScanXL Professional, in order detect these codes quickly and accurately without having to do much work yourself! Testing Procedure For Faulty Sensor: Once you have detected any faulty codes associated with your 2014 Dodge Durangos coolant temperature sensor then it is time for some actual testing! You will need an ohmmeter or multimeter for this part simply set it up according to its instructions and test each connection point individually until all readings come back within their specified parameters for accuracy!

Maintenance Tips for Operating a 2014 Dodge Durango

Maintaining a 2014 Dodge Durango is an important part of keeping it running at its best. Regular maintenance checks, filling up on fluids on timely intervals, and other preventative steps are necessary to keep the engine in top condition. In addition to these general tips, there are also some special considerations that need to be taken into account when dealing with the coolant temperature sensor.

Filling Up On Fluids On Timely Intervals

It is important to fill up the fluids of a 2014 Dodge Durango on timely intervals, as this helps to ensure that all parts of the engine are functioning properly and efficiently. This includes oil, brake fluid, and transmission fluid. If these fluids become too low or dirty, it can cause problems with the engines performance and may even lead to complete failure if left unchecked. Additionally, it is important to check that all hoses and belts are in good condition as they can easily become worn or damaged over time.

Scheduling Regular Maintenance Checks

In order to keep the engine of a 2014 Dodge Durango running at its best, it is important to schedule regular maintenance checks. These should include checking for any leaks or other issues with the cooling system, as well as inspecting all hoses and belts for wear and tear. It is also important to check that all sensors are working correctly so that any potential problems can be quickly identified and fixed before becoming serious issues.

Considerations For Installing New Coolant Temperature Sensor

When installing a new coolant temperature sensor in a 2014 Dodge Durango, there are several considerations that must be taken into account. The quality of the product purchased should be checked carefully before installation begins; this includes checking for any defects or damage that may have occurred during manufacturing or shipping. Additionally, during installation procedures it is important to take care when making connections between wires and components so that no damage occurs while doing so. Lastly, careful measurement must be taken when mounting the new sensor in its correct position in order for it to work properly once installed.

FAQs & Answers

Q: What is the Coolant Temperature Sensor?
A: The Coolant Temperature Sensor is a device that measures the temperature of the engine’s coolant. It sends signals to the engine control unit (ECU) to adjust the fuel/air ratio, ignition timing and other parameters to keep the engine running at its optimal temperature.

Q: Where is the Coolant Temperature Sensor located on a 2014 Dodge Durango?
A: On a 2014 Dodge Durango with a 3.6L Pentastar engine, the Coolant Temperature Sensor is located in front of the radiator, near the top of the motor.

Q: What should I do if I suspect my Coolant Temperature Sensor has failed?
A: If you suspect your Coolant Temperature Sensor has failed, you should first check for Diagnostic Trouble Codes (DTC) via an OBDII scanner. If there are any codes present, they will indicate that a sensor has failed. You can then test the sensor with an ohmmeter or multimeter to see if it is functioning correctly.

Q: How often should I check my 2014 Dodge Durango’s fluids?
A: You should check your 2014 Dodge Durango’s fluids on a regular basis to ensure that they are at their proper levels and are not contaminated or degraded. You should also have your car serviced regularly by a qualified mechanic who can inspect all major components for wear and tear and perform any necessary maintenance or repairs.

Q: What considerations should I make when installing a new Coolant Temperature Sensor?
A: When installing a new Coolant Temperature Sensor, it is important to ensure that you purchase one of good quality and follow all installation instructions carefully. It is also important to take careful measurements when connecting wires in order to avoid any potential problems down the line.

The coolant temperature sensor for the 2014 Dodge Durango 3.6 is located in the lower radiator hose near the engine. It is a small, round, black component that should be easily identifiable. This component is essential for proper engine cooling and maintaining optimal engine temperature. Regular inspection of this component and its wiring should be performed to ensure optimal performance and longevity of the vehicle.