Where to Find the 2014 Nissan Pathfinder Blower Motor Resistor Location

The blower motor resistor on a 2014 Nissan Pathfinder is located behind the glove compartment.

2014 Nissan Pathfinder Blower Motor Resistor Location

The 2014 Nissan Pathfinder Blower Motor Resistor is an essential component for its air conditioning system. It maintains the temperature levels inside the car and regulates the distribution of air. Locating the resistor can be difficult and time-consuming, however, it should be done correctly to make sure the blower motor works properly. This guide will explain where to find the blower motor resistor in a 2014 Nissan Pathfinder and how to replace it if necessary. You will need a few supplies such as a new resistor assembly and some screwdrivers for this task. With careful attention to detail and some patience, you can replace your Pathfinder’s blower motor resistor quickly and efficiently.

Types of Nissan Pathfinder Blower Motor Resistor

When it comes to the 2014 Nissan Pathfinder, there are two types of blower motor resistors available OEM blower motors and replacement blower motors. OEM stands for Original Equipment Manufacturer, meaning that the part was made by the same company that manufactured the original car. Replacement parts are produced by a different company and may be of a different quality than OEM parts.

Location and Description of the Blower Motor Resistor

The blower motor resistor is located behind the glove box compartment in the 2014 Nissan Pathfinder. It is a small rectangular-shaped plastic box with several wires connected to it. The resistor regulates the amount of electricity sent to the blower motor, allowing it to blow air at varying speeds when the climate control system is used. Components required for repair include a new resistor, electrical connector, wire ties and electrical tape.

Symptoms of Faulty Nissan Pathfinder Blower Motor Resistor

If there is something wrong with your Nissan Pathfinders blower motor resistor, you may experience one or more of these symptoms: no heat or cool air issuing from your vents, cool or hot air blowing intermittently or at decreased strength compared to normal operation.

Causes of a Faulty Blower Motor Resistor

There can be several causes for a faulty blower motor resistor in your 2014 Nissan Pathfinder. One common cause is deterioration due to corrosion over time, as moisture can seep into components over time and cause them to wear down or break down completely. Another possible cause is a failed regulator pad inside the resistor itself which will prevent electricity from flowing properly through it.

Steps for Replacing a Faulty Nissan Pathfinder Blower Motor Resistor

If you need to replace your 2014 Nissan Pathfinders faulty blower motor resistor, follow these steps: 1) Remove and uninstall old part, 2) Install new resistor in correct position; 3) Check connections for proper fit and securement; 4) Test heater and A/C settings after installation; 5) Reconnect any loose wiring if necessary; 6) Replace glove box if needed; 7) Close up compartment once everything is back in place. After completing all these steps, your vehicle should be ready to use with no further issues related to its heating or cooling system!

2014 Nissan Pathfinder Blower Motor Resistor Location

Replacing the blower motor resistor in a Nissan Pathfinder is a relatively simple task that can be accomplished with the right tools. The following list of tools will be necessary to complete the job: screwdrivers, pliers, ratchet wrench set, multimeter, socket set, and an Allen wrench set.

Tools Required for Replacing The Nissan Pathfinder Blower Motor Resistor

Screwdrivers are needed to remove screws or bolts from the existing resistor and to fasten the new one in place. Pliers are used to grip and hold small items that are difficult to manage with fingers alone. A ratchet wrench set is used for loosening and tightening nuts and bolts. A multimeter helps to test electrical components for their current levels before installation. Socket sets provide a variety of sizes in order to fit any size nut or bolt. Finally, an Allen wrench set can be used for removing screws on some models of blower motor resistors.

Fukushima Nuclear Disaster Explained

The Fukushima nuclear disaster began on March 11th, 2011 when a powerful earthquake struck off the coast of Japan resulting in a tsunami that caused significant damage to several nuclear power plants owned by the Tokyo Electric Power Company (TEPCO). The resulting meltdown of the reactors released radioactive material into the atmosphere and contaminated large areas both near the power plant and further away.

Causes and Effects

The primary cause of this disaster was both human error and inadequate safety measures as TEPCO had not prepared adequately for such a large earthquake or tsunami. The effects of this disaster were devastating as it resulted in numerous deaths due to radiation exposure, contamination of land and water sources, displacement of thousands of people from their homes, economic losses due to evacuation costs and clean-up efforts, as well as long-term health risks from radiation exposure.

Impact on Economy, Environment and Public Health

The economic impact was severe as businesses that relied on tourism or fishing suffered greatly due to contamination fears while also having to spend money evacuating their employees from affected areas. The environment was also heavily impacted as contaminated water leaked into rivers and oceans leading to marine life contamination while radiation spread through air currents across large distances contaminating soil along its path. Finally, public health was affected through long-term radiation exposure causing cancer in many people living in affected areas who were exposed over prolonged periods of time.

FAQ & Answers

Q: What types of Nissan Pathfinder Blower Motor Resistor are available?
A: There are two types of blower motor resistors available for the Nissan Pathfinder, OEM blower motors and replacement blower motors.

Q: Where is the blower motor resistor located on the Nissan Pathfinder?
A: The blower motor resistor is typically located at the front of the engine compartment near the air conditioning compressor. It is attached to the heater control module and connected to the evaporator blower motor.

Q: What components are required to repair a faulty Nissan Pathfinder Blower Motor Resistor?
A: To repair a faulty blower motor resistor, you will need a new replacement resistor, screwdrivers, pliers, ratchet wrench set, multimeter, socket set, Allen wrench set and possibly additional tools depending on your specific repair needs.

Q: What are some symptoms of a faulty Nissan Pathfinder Blower Motor Resistor?
A: Some common symptoms of a faulty blower motor resistor include no heat or cool air issuing from the vents, cool or hot air blowing intermittently or at decreased strength.

Q: What are some causes for a faulty Nissan Pathfinder Blower Motor Resistor?
A: Some common causes for a faulty blower motor resistor include deterioration due to corrosion and failed regulator pads inside the resistor.

The 2014 Nissan Pathfinder blower motor resistor is located behind the glove box in the passenger side foot well. It is held in place by two screws and can be easily accessed with a Phillips screwdriver. With the proper tools and a bit of knowledge, replacing this resistor should be possible in about an hour.