Where to Find the 2016 Chevy Trax Blend Door Actuator: A Step-by-Step Guide

The blend door actuator for a 2016 Chevy Trax is located behind the glove box.

2016 Chevy Trax Blend Door Actuator Location

The 2016 Chevy Trax blend door actuator is located in the HVAC unit, under the dash near the passenger side. The blend door actuator is used to mix hot and cold air from outside and inside of the cabin, providing an optimal temperature that can be controlled directly by the driver. Replacing a faulty or broken actuator is essential to keep the air conditioning system functioning properly, as well as preventing unnecessary damage. This guide covers how to find, access and replace your blend door actuator with ease. It should also help you understand what precautions to take before attempting any remedy. With just a few basic tools, youll be able to get back to comfortable temperatures in no time!

Locating the 2016 Chevy Trax Blend Door Actuator

The blend door actuator is an important component of the air conditioning system in the 2016 Chevy Trax. It is a small device that is responsible for controlling and regulating the temperature of the vehicle’s interior. The blend door actuator is located behind the glove box on the passenger side of the vehicle. To access it, you will need to remove the glove box and plastic paneling beneath it. This can be done with a screwdriver and a headlamp to help you see into tight spaces.

Door Panel Removal from 2016 Chevy Trax

Once you have removed all necessary components, you will be able to locate and identify the blend door actuator on your 2016 Chevy Trax. The actuator is usually found behind a thin plastic panel on either side of the dashboard. To remove this panel, use a screwdriver to unscrew any screws that may be holding it in place, then carefully pull it away from its mounting location to gain access to the actuator.

Blend Door Actuator Identification

Identifying which part is actually the blend door actuator can be difficult due to its small size and location within the car’s interior. Most often, it will have a black plastic cover over it with two or three electrical wires connected to it. If you are unsure whether or not this part is actually your blend door actuator, refer to your vehicle’s owner manual for further guidance as to its exact location and identification features.

Signs of a Malfunctioning 2016 Chevy Trax Blend Door Actuator

If your blend door actuator has gone bad, you may start noticing some signs when using your AC or heater settings in your 2016 Chevy Trax. These signs include inaccurate temperature settings in your car’s interior as well as unresponsive temperature control knobs when trying to adjust them manually. If you are experiencing any of these symptoms, then it may be time for you to replace your blend door actuator in order to get back accurate temperature control once again in your vehicle.

Replacing a Failing 2016 Chevy Trax Blend Door Actuator

Replacing the blend door actuator in your 2016 Chevy Trax is relatively simple. The first step is to remove the existing actuator. This can be done by accessing the glove box, removing the screws that hold it in place and then removing the actuator itself. Once that has been done, you can then install the new blend door actuator in its place. Make sure to double check all screws once they have been replaced to ensure proper installation of the new actuator.

Once the replacement has been made, it is important to test that the temperature dial is able to operate properly after installation. To do this, check both the AC and heat settings for proper operation and make sure any vents are functioning properly as well. This will help ensure that your blend door actuator replacement was successful.

Cost of Replacing a 2016 Chevy Trax Blended Air Door Actuator

The cost of replacing a 2016 Chevy Trax Blended Air Door Actuator will vary depending on whether you purchase an online part or if you decide to pay for an installation service. If you choose to buy an online part, then costs will depend on where you purchase from and what type of part you purchase. If you decide to go with an installation service then prices may vary depending on which company provides the service and what type of labor rate they charge for their services.

Common Signs of a Malfunctioning AC Unit on 2016 Chevy Trax

One of the most common signs that your AC unit may be malfunctioning in your 2016 Chevy Trax is if it does not seem to be blowing cool air anymore or if it seems like it is taking longer than usual for it to cool down inside your vehicle. Other signs include unusual noises coming from your AC system or if there are any strange smells coming from inside your vehicle when running your AC system. If any one of these signs occur, it may be time for an AC unit service in a car so it’s important to contact a professional right away in order to diagnose and repair any potential issues with your AC system before they become more serious or costly repairs are needed in the future.

FAQ & Answers

Q: Where is the 2016 Chevy Trax Blend Door Actuator located?
A: The 2016 Chevy Trax Blend Door Actuator is located on the door panel of the car. It may be difficult to identify, so it is important to use a headlamp and a screwdriver to locate it.

Q: What tools are needed for locating the 2016 Chevy Trax Blend Door Actuator?
A: A screwdriver and a headlamp are required for locating the 2016 Chevy Trax Blend Door Actuator. With these tools, you can unscrew the door panel and access the blend door actuator.

Q: What signs indicate that a 2016 Chevy Trax Blend Door Actuator may be malfunctioning?
A: Signs that indicate a malfunctioning blend door actuator include inaccurate temperature settings in the car’s interior and unresponsive temperature control knobs.

Q: How much does it cost to replace a failing 2016 Chevy Trax Blend Door Actuator?
A: The cost of replacing a failing 2016 Chevy Trax Blend Door Actuator will depend on whether you choose to purchase an online part or have an installation service complete the work. Generally, installation services cost more than buying an online part.

Q: What are common signs of a malfunctioning AC unit on 2016 Chevy Trax?
A: Common signs of a malfunctioning AC unit on 2016 Chevy Trax include warm air blowing out of vents, irregular cycling, and strange noises coming from under the hood or dashboard area. If any of these signs occur, it is important to get your AC unit checked by a professional as soon as possible.

The 2016 Chevy Trax Blend Door Actuator is located on the driver’s side of the vehicle, just below the instrument panel. It is a small device that controls the air flow from the heating and air conditioning system. The actuator should be checked regularly for proper operation and to ensure that the air flow is not blocked.