How to Find the 2016 Kia Sorento Shift Lock Solenoid Location Easily

The shift lock solenoid for a 2016 Kia Sorento is located in the center console above the ignition switch.

2016 Kia Sorento Shift Lock Solenoid Location

The 2016 Kia Sorento has a shift lock solenoid located within its gearbox. This solenoid is an important safety feature that prevents unauthorized shifting of the vehicle and helps to maintain a consistent stationary position. Replacing or repairing this solenoid can be tricky, however, as it requires special tools and knowledge. Fortunately, those with an understanding of automotive mechanics can locate and identify the shift lock solenoid fairly easily. It is typically found in the same area as other smaller transmission components such as wiring harnesses and shift rods. Knowing exactly where to look inside the gearbox of your 2016 Kia Sorento should help you quickly address any issues related to its shift lock solenoid.

Introduction

The Kia Sorento is a popular SUV model, first released in 2002. It has been well-received by consumers, thanks to its spacious interior and comfortable ride. However, many drivers have encountered problems with the shift lock solenoid located inside the vehicle. In this article, we’ll discuss where the shift lock solenoid is located on a 2016 Kia Sorento, and how to access it.

Shift Lock Solenoid Location

The 2016 Kia Sorento’s shift lock solenoid is located underneath the center console. To access the solenoid, you’ll need to remove the center console trim panel. To do this, start by removing any screws or bolts that may be holding it in place. Once these are removed, carefully pry up the panel using a flathead screwdriver or similar tool.

Once you have access to the area underneath the center console, you should be able to see and identify the shift lock solenoid without difficulty. It should look like a small cylindrical cylinder with two wires coming off of it.

Replacing The Shift Lock Solenoid

If your Kia Sorento’s shift lock solenoid needs to be replaced, it will require some basic tools and knowledge of automotive repair techniques. First, disconnect the negative battery cable from your car battery for safety purposes. Then remove any screws or bolts that are holding the old solenoid in place and carefully pry it out with a flathead screwdriver or similar tool.

Once you’ve removed the old solenoid, replace it with a new one of comparable size and wiring arrangement (if necessary). Connect all wires securely before replacing any screws or bolts that were removed during disassembly. Finally, reconnect your car battery’s negative cable and test your vehicle for proper operation before driving again.

Conclusion

In conclusion, if you’re having trouble locating or replacing your 2016 Kia Sorento’s shift lock solenoid, this article should provide some helpful information on where to find it and how to replace it safely and correctly. If you encounter any difficulty during any part of this process or if you’re unsure about something related to your vehicle’s repair/maintenance needs, contact an experienced auto technician as soon as possible for assistance and advice.

Introduction

The Kia Sorento is a mid-sized SUV manufactured by Kia Motors since 2002. It is popular for its powerful engine, spacious interior and aggressive styling. In 2016, the Sorento underwent a major redesign with several new features, including an improved shift lock solenoid. This article will discuss the location of the shift lock solenoid on the 2016 Kia Sorento.

Location of Shift Lock Solenoid

The shift lock solenoid is located underneath the center console of the 2016 Kia Sorento. To access it, you must first remove the center console panel, which can be done by removing several screws and bolts located around the edges of the panel. Once you have removed the panel, you should be able to locate the shift lock solenoid easily.

Removing and Replacing Shift Lock Solenoid

Once you have located the shift lock solenoid, you can begin to remove it. The solenoid is connected to a bracket and two wires which will need to be disconnected before it can be removed. Once these connections have been disconnected, you can carefully remove the solenoid from its bracket and set it aside.

To replace it with a new one, simply reverse these steps by connecting the two wires to the new solenoid and securing it back into its bracket with screws or bolts as necessary. Make sure all connections are tight before reassembling your center console panel and testing your new shift lock solenoid for proper operation.

Conclusion

In conclusion, locating and replacing your shift lock solenoid on your 2016 Kia Sorento is a relatively simple task that requires only basic tools and knowledge of how to safely remove components from your vehicle’s interior. With patience and attention to detail, this task can be completed in less than an hour with minimal effort involved.

FAQ & Answers

Q: Where is the shift lock solenoid located on a 2016 Kia Sorento?
A: The shift lock solenoid is located on the top left side of the transmission housing.

Q: What does the shift lock solenoid do?
A: The shift lock solenoid prevents the shifter from moving out of park without pressing the brake pedal. This helps to prevent accidents by ensuring that the vehicle is not accidentally shifted out of park.

Q: How do I know if my shift lock solenoid is working properly?
A: If your shift lock solenoid is working properly, you should be able to move the shifter out of park only after pressing the brake pedal. If you are unable to move your shifter out of park, it could be an indication that your shift lock solenoid is not functioning properly and may need to be replaced.

Q: Can I replace my shift lock solenoid myself?
A: It is possible to replace a shift lock solenoid yourself, however it can be a complicated process and should only be attempted if you have prior experience with vehicle repairs and maintenance. If you are unsure how to proceed, we recommend consulting a professional mechanic for assistance.

Q: Are there any special tools required to replace my shift lock solenoid?
A: Yes, in order to replace your shift lock solenoid on a 2016 Kia Sorento, you will need a socket wrench set, pliers and flathead screwdriver. You may also need additional tools depending on your specific vehicle model.

The 2016 Kia Sorento shift lock solenoid is located inside the transmission case, just behind the front passenger side wheel. The solenoid is easily accessible and can be replaced with minimal effort. It is important to use the correct replacement part when replacing the shift lock solenoid, as failure to do so could lead to further damage.