Solved: 2017 Chevy Silverado No Crank No Start Issue

The 2017 Chevy Silverado will not start due to a no-crank issue.

2017 Chevy Silverado No Crank No Start

The 2017 Chevy Silverado can be an extremely frustrating vehicle to drive if its no cranking and no starting. When the Silverado refuses to start, this can leave the driver stranded and feeling helpless. Thankfully, there are some common causes for a no crank/no start that are easy to inspect and check. From battery connections to fuel pump issues and more, there are a few potential culprits for this predicament. In this overview, well go through some of the common causes for a no crank/no start on the 2017 Chevy Silverado so that you can hopefully find an answer quickly.

Getting Started – Initial Diagnosis

When trying to diagnose a no crank no start issue on a 2017 Chevy Silverado, the best way to start is by performing an initial diagnosis. This means performing a visual inspection of the components involved in the starting system, such as the battery, alternator, starter solenoid, fuses and cables. If any of these components appear to be damaged or faulty then it could be causing the no crank no start issue.

Another important step in the initial diagnosis is to check for any diagnostic trouble codes (DTCs) that may be stored in the engine control module (ECM). Checking for stored DTCs can help pinpoint the cause of the problem quickly and accurately.

Electrical Components – Alternator

The alternator is responsible for charging the battery while the engine is running and supplying power to other electrical components. If it fails then it will not provide enough power to start the engine or keep it running. To test an alternator you will need an ammeter or voltmeter and a battery charger. With these tools you can measure voltage output from the alternator and determine if it is functioning correctly.

Starter Solenoid – Fuses

The starter solenoid is responsible for supplying power from the battery to the starter motor when you turn on your ignition switch. If there is a problem with either component then this could prevent your engine from starting. You can check both components with an ohmmeter or multimeter, which will allow you to measure resistance and current flow through each component. You should also check all fuses related to your starting system as they may have blown due to a fault in one of these components.

Battery Issues – Cables

If your battery has low charge then this could prevent your engine from starting as well as cause other electrical issues such as dim lights or slow cranking speeds when attempting to start your engine. You should inspect all cables that are connected to your battery for any corrosion or damage that may be preventing them from functioning correctly. Additionally, you should check that all connections are secure and tight; if they are loose then this could also cause problems with starting your engine.

Charging System – Testing

In order to ensure that your charging system is functioning correctly, it is important that you perform regular tests on both your alternator and battery with a multimeter or voltmeter. This will help identify any issues with either component before they become serious problems which could prevent your vehicle from starting up properly at all times. Additionally, checking that all connections between these two components are secure and tight can help reduce potential issues with starting up in future too.

Ignition Switch and Lock Cylinder

The ignition switch supplies power from your battery directly into various electrical components when you turn on your key in order to activate them this includes things like fuel pumps, injectors etc., so if there’s something wrong here then it could stop your vehicle from starting properly too! It’s also important that you inspect both parts of this component both switch itself as well as lock cylinder since faults here can cause not only no crank/no starts but also security issues too!

Safety Mechanisms – Troubleshooting Issues

Finally, some vehicles come equipped with safety mechanisms designed specifically to prevent theft or tampering; if these become activated then they can prevent normal operation of certain systems including those related to starting up! To troubleshoot these kinds of issues it’s best practice firstly read through owner’s manual thoroughly so familiarize yourself with how these systems work; secondly use diagnostic tools such as OBD reader/scanner so access information stored within ECU; thirdly use voltage/resistance meter so test various electrical parts around car systematically until fault found!

Engine Control Module/Computer – Location

The Engine Control Module (ECM) or computer controls various functions within an internal combustion engine including fuel injection timing, spark plug firing time etc., so if there’s something wrong here then it could potentially stop car from cranking entirely! It’s usually located somewhere within passenger compartment but exact position varies depending on make & model consult owners manual for more detailed instructions about its location & removal process!

Check Engine Light – Resetting The ECM

Additionally, if “Check Engine Light” appears on dashboard when attempting start car then this indicates possible fault within ECM; in order reset ECM & clear error codes try disconnecting negative terminal off cars battery & reconnecting few minutes later doing this should reset system & clear any errors! However always consult dealer/mechanic before attempting reset so ensure safety & correct procedure followed at all times!

Security Alarm System

The 2017 Chevy Silverado may have a security alarm system that needs to be deactivated and reactivated. If the system is not working correctly, it may be necessary to reset it in order to make sure that it is functioning properly. To do this, the owner must first locate the alarm system’s control box. Once located, the owner should make sure all wires are securely connected and then press and hold the reset button for five seconds. After releasing the button, the alarm should be deactivated and ready for use again.

Repair Work Parts Replacement

If repair work is needed on a 2017 Chevy Silverado, it is important to ensure that all parts are replaced correctly. One part of particular importance is the coolant, which needs to be replaced regularly in order to maintain vehicle performance and efficiency. When replacing coolant, be sure to follow all of the manufacturer’s instructions carefully in order to avoid any problems down the line with your vehicle’s cooling system.

Wiring Harness and Connections

The wiring harness of a 2017 Chevy Silverado is a complex network of wires and electrical connectors that must be maintained properly in order for your vehicle to run optimally. One type of connection often found on these vehicles are electrical terminals that can become corroded or otherwise damaged over time if not properly cared for. To keep these terminals from failing prematurely, regular inspection and cleaning should be done at least once a year or as needed.

Fuel Delivery System Problems

When dealing with fuel delivery system problems on a 2017 Chevy Silverado, one component that could potentially cause issues is the fuel pump relay. In order to diagnose this problem properly, it is important to consult with a professional mechanic who can help you identify any faulty wiring diagrams or other issues associated with your vehicle’s fuel delivery system. Once identified, they will then be able to recommend any necessary repairs or replacements in order to get your vehicle running efficiently again as soon as possible

FAQ & Answers

Q: What Tools Are Needed to Troubleshoot a 2017 Chevy Silverado No Crank No Start?
A: The tools needed to troubleshoot a 2017 Chevy Silverado No Crank No Start include: multimeter, voltmeter, jumper cables, flashlight, and pliers.

Q: How Do I Test the Alternator on a 2017 Chevy Silverado?
A: To test the alternator on a 2017 Chevy Silverado, you will need to connect a voltmeter to the battery terminals and measure the voltage. If the voltage is not within normal range (between 12-14 volts), then you may need to replace the alternator.

Q: How Can I Check for Battery Issues on My 2017 Chevy Silverado?
A: To check for battery issues on your 2017 Chevy Silverado, you can use a multimeter or voltmeter to measure the voltage of the battery while it is running. If there is an abnormally low reading than your battery may be faulty and need to be replaced.

Q: What Should I Do if There Is an Issue with My Ignition Switch and Lock Cylinder?
A: If there is an issue with your ignition switch and lock cylinder, you should first check that all of the electrical connections are properly connected and that there are no loose wires or corroded connections. If all of these connections are in place and secure, then you may need to replace either or both components.

Q: What Should I Do if My Engine Control Module/Computer Is Not Working Properly?
A: If your engine control module/computer is not working properly, then you should first check that all of the wiring harnesses are properly connected and that there are no loose wires or corroded connections. You should also make sure that all fuses are in good condition. If all of these components are in good condition then it is likely that you will need to replace your engine control module/computer.

The 2017 Chevy Silverado is a reliable truck, but it can suffer from a common issue known as “no crank no start”. This issue is often caused by low battery voltage or a faulty starter motor, and can be fixed by inspecting the battery and starter motor. In some cases, other components such as the ignition switch or wiring may need to be inspected for faults.