The recommended torque for the 2017 F-150 lug nuts is 100 lb-ft.

2017 F 150 Lug Nut Torque

The 2017 F 150 is the latest model of Ford’s wildly popular commercial truck. To ensure that your truck and its components stay in optimum condition, it’s important to know the correct lug nut torque to apply when changing or replacing a tire or wheel. The proper torque for the 2017 F-150 is between 95 and 105 ft/lb, which can easily be examined with a standard torque wrench. It’s also recommended that you use spline-drive lug nuts as they provide additional security against stretching or damaging the studs. With proper care and maintenance, your 2017 F-150 will remain reliable and safer for years to come.

2017 F 150 Lug Nut Torque

Factory Lug Nut Torque Specifications

The factory lug nut torque specifications for a 2017 F 150 4×2 and a 2017 F 150 4×4 are the same. The manufacturer recommends torquing the lug nuts to 80 ft-lbs. This should be done in a crisscross pattern, starting from the center and working your way outwards. It is important to torque the lug nuts, as improperly torqued lug nuts can cause a variety of issues, from vibration to tire damage.

Alternative Torque Specs

When replacing or repairing tires on a 2017 F 150, different torque specs can be used depending on the type of wheel used. For cone seat wheels, the recommended torque specification is 100 ft-lbs. This specification should only be used if cone seat wheels are installed on the vehicle; otherwise it may result in excessive vibration or loosening of the lugs. For mag seat wheels, the recommended torque specification is 110 ft-lbs. Again, this specification should only be used if mag seat wheels are installed on the vehicle; otherwise it may result in excessive vibration or loosening of the lugs.

Advantages of Properly Torqued Lugs

Properly torquing your lug nuts will provide numerous advantages over not doing so. Safety is perhaps one of the most important benefits as it ensures that your tires remain securely attached to your vehicle at all times, reducing your risk of an accident due to loose lug nuts. Additionally, properly torqued lugs can improve fuel economy by reducing rolling resistance and helping reduce wear on your tires and suspension components due to consistent contact with the road surface.

Tire Repair & Replacement Procedures

When rotating or replacing tires on a 2017 F 150, there are certain procedures you must follow for safety and efficiency purposes. Rotating tires involves raising your vehicle up off the ground using either a jack or jack stands and then removing each wheel in turn before switching them around so that each tire is now located at an opposite corner of your vehicle from where it originally was located before raising your vehicle up off the ground again and reattaching each wheel using new lug nuts if necessary before finally lowering your vehicle back down onto its wheels and repeating this process for all four corners of your vehicle until all four tires have been rotated correctly into their new positions. Replacing a tire involves taking off each wheel around where you need to replace that tire before removing the old tire and replacing it with a new one before reattaching each wheel using new lug nuts if necessary before lowering your vehicle back down onto its wheels again and repeating this process for all four corners of your vehicle until all four tires have been replaced correctly with their new ones.

What You’ll Need for the Job

To properly rotate or replace tires on a 2017 F 150 you’ll need several tools including: A jack, jack stands (if you don’t have access to a lift), wrenches (for both metric and standard sizes), an impact wrench (optional but highly recommended), and most importantly a proper size socket for removing/installing lug nuts that matches both their thread count as well as their hex shape size (as these will vary depending on what type of rim/lug nut combination you have). Additionally, having spare/new lug nuts handy is also highly recommended in case any become stripped or broken during removal/installation so that you won’t find yourself stranded with no way to reattach any removed wheels back onto your car safely afterwards without having any spare lugs available as replacements instead

Lug Nut Torque

The correct lug nut torque for the 2017 F-150 varies depending upon the size of the lug nut. Generally, Ford recommends that you use a torque wrench to tighten the lug nuts to 100 ft-lbs. However, if you are using aftermarket wheels and/or tires, it is best to check with the manufacturer for their recommended torque specifications.

Wheel Lug Nuts

The wheel lug nuts on the 2017 F-150 are 14mm in size. It is important to use a properly sized socket when removing or tightening them. An improperly sized socket can cause damage to the lug nut and may result in a loose connection between the wheel and hub.

Torque Pattern

When tightening the wheel lugs, it is important to follow a specific pattern. Start by tightening one lug nut all the way down, then move clockwise around the tire until all lugs have been tightened. Once all lugs have been tightened, go back around and tighten each one an additional turn until they have reached their desired torque setting. This will ensure that all lugs are tightened evenly and securely.

Torque Stick

In addition to using a torque wrench, you can also use a torque stick to ensure that your lugs are properly tightened. The torque stick is an adjustable wrench with a set range of torques (usually between 80-120 ft-lbs). To use it simply adjust it to your desired setting and then tighten each lug nut until it clicks at that setting. This ensures that each lug nut has been tightened evenly and securely with no risk of overtightening or under tightening any of them.

Tire Pressure Monitoring System (TPMS)

If your 2017 F-150 has an installed Tire Pressure Monitoring System (TPMS) it is important to note that over-tightening or under-tightening your wheel lugs can cause damage or malfunction of this system. To prevent this make sure you always follow Fords recommended torque specifications for your wheel size when tightening your wheel lugs and always use a properly sized socket when removing or tightening them.

FAQ & Answers

Q: What is the factory lug nut torque specification for the 2017 F 150 4×2?
A: The factory lug nut torque specification for the 2017 F 150 4×2 is 120 pounds-feet.

Q: What is the factory lug nut torque specification for the 2017 F 150 4×4?
A: The factory lug nut torque specification for the 2017 F 150 4×4 is 140 pounds-feet.

Q: What are some alternative torque specs that can be used?
A: Alternative torque specs that can be used include cone seat and mag seat.

Q: What are some advantages of properly torqued lugs?
A: Advantages of properly torqued lugs include increased safety, improved fuel economy, and a better overall performance of your vehicle’s tires.

Q: What do I need to do a tire repair or replacement job on my 2017 F 150?
A: To perform a tire repair or replacement job on your 2017 F 150, you will need a jack, jack stands, wrenches, and a lug nut socket. Additionally, you will need to follow specific procedures such as rotating tires, removing and installing tires safely.

The 2017 Ford F-150 requires a torque of 105 lb-ft on the lug nuts to ensure a secure and reliable connection between the wheel and the vehicle. This torque should be applied evenly to avoid any damage to the threads or components. It is important to check the torque regularly, especially after any major changes in wheel or tire sizes, to avoid any problems with the mounting system.