2017 Ford F350 Wheel Torque Specs: The Ultimate Guide

The 2017 Ford F-350 wheel lug torque specifications are 120 lb-ft.

2017 F350 Wheel Torque Specs

For anyone in need of the correct torque specifications for their 2017 Ford F350 wheels, here is the essential knowledge. The approximate torque specification for a 2017 Ford F350 wheel is 110 lb-ft, while the maximum recommended torque specification is 130 lb-ft. Failing to use the appropriate torque specification may result in wheel nuts coming loose or even in complete wheel failure. Its important to re-torque a wheel nut after driving up to 15 miles and when doing any maintenance work on a wheel. Therefore, be sure to always use a quality torque wrench when tightening any wheel nuts!

Front Wheel Torque Specs

The torque specification for the front wheels of a 2017 F350 is 120 ft-lbs (162 Nm). This is the amount of force needed to adequately secure the wheel to the hub assembly and prevent any looseness or movement. It is important to adhere to this torque specification when installing new wheels or replacing old ones. Additionally, it is important to check the wheel lug nut torque after driving for 25 miles in order for proper wheel security.

Wheel Bolt Specification

The wheel bolts used on a 2017 F350 are 14mm in diameter, 1.5mm thread pitch, and 28mm long. When purchasing replacement or additional wheel bolts, it is important to ensure that they match these specifications as using incorrect bolts can cause damage to the vehicles hub assembly and lead to an unsafe driving experience.

Lug Nut Installation Guidelines

When installing lug nuts on a 2017 F350, there are a few guidelines that should be followed for optimal performance and safety. First, it is important to use only hand tools when tightening lug nuts; power tools can easily over-tighten the nuts, leading to potential damage or failure of components. Second, it is best practice to install lug nuts in a star-like pattern (one at 12 oclock, one at 3 oclock, one at 6 oclock, etc.) in order to ensure even pressure distribution across all components involved. Finally, once all nuts have been tightened according to the manufacturer’s specifications (120 ft-lbs), it is essential that they be re-checked after 25 miles of driving in order to ensure they are still properly secured.

How To Change Tires On 2017 F350

Changing tires on a 2017 F350 can be done safely and efficiently with just a few basic tools and materials. First off, you will need an appropriate jack and jack stands for raising the vehicle off of its wheels as well as a tire iron for removing lug nuts from their corresponding studs on the wheel hub assembly. Once these items have been acquired, you can begin by jacking up your vehicle securely before removing all five lug nuts from each tire with your tire iron; once this has been accomplished you can remove the old tire from its hub assembly before finally installing your new tire and securing it with your five lug nuts before lowering your vehicle back onto its new tires.

Rear Wheel Removal Procedure

Removing rear wheels from a 2017 F350 requires some special considerations due to their size and weight compared with front wheels. First off, you will need an appropriate jack and jack stands as well as hand tools such as wrenches and/or ratchets in order to loosen any bolts/nuts which may be holding the rear wheels in place before they can be removed safely from their hub assembly. Once these items have been acquired you can begin by jacking up your vehicle securely before loosening any bolts/nuts which may be holding your rear wheels onto their respective hubs; once this has been accomplished you can carefully remove each rear wheel from its hub assembly while taking special care not to damage any other components which may exist nearby such as brakes or suspension pieces once both rear wheels have been removed you can then lower your vehicle back onto its remaining front wheels using an appropriate jack stand setup before re-installing both rear wheels according to manufacturer specifications (120 ft-lbs).

Inspection of Wheels

The first step in determining the torque specs for a 2017 F350 is to inspect the wheels. It is important to check the condition of the wheel and its components, such as the rim, the hub, and the lug nuts. If any of these components are damaged or worn out, they should be replaced before proceeding with any further steps. Additionally, it is important to check for any foreign objects that may be lodged in or around the wheel which could affect its performance.

Tire Pressure Check For 2017 F350

After inspecting the wheels, it is important to check the tire pressure of the 2017 F350. The correct tire pressure should be specified in your vehicle’s owner’s manual. The tire pressure should not exceed the manufacturer’s recommended limits since this can cause excessive wear on tires and other components. Additionally, checking your tire pressure regularly will help improve fuel efficiency and extend the life of your tires.

Troubleshooting Wheel Issues

If you experience any issues with your wheels such as vibrations or noise while driving, it may be necessary to troubleshoot these issues first before determining your torque specs for a 2017 F350. Common causes for wheel issues include worn out or damaged components, improper balance or alignment, and loose lug nuts. If any of these issues are present then they must be addressed before continuing with any further steps towards determining your torque specs for a 2017 F350.

Torque Requirements For Replacing Wheels

When replacing wheels on a 2017 F350 it is important to adhere to torque specifications provided by both Ford Motor Company and aftermarket manufacturers in order to ensure proper installation and performance of new wheels on your vehicle. Generally speaking, Ford recommends that lug nuts be torqued to between 90-100 ft-lbs while aftermarket manufacturers typically require between 90-110 ft-lbs depending on wheel size and design. Additionally, it is important to remember that all lug nuts should always be torqued evenly in order to prevent uneven stress on wheel components which can lead to premature failure.

FAQ & Answers

Q: What are the front wheel torque specs for a 2017 F350?
A: The front wheel torque specs for a 2017 F350 is between 95-105 ft-lbs.

Q: What is the wheel bolt specification for a 2017 F350?
A: The wheel bolt specification for a 2017 F350 is M14x1.50.

Q: What are the guidelines for installing lug nuts on a 2017 F350?
A: Before installing lug nuts, make sure to clean and lubricate the threads of the wheel studs and lug nuts. Then, tighten each lug nut in a star pattern until they are snug and then torque them to the specified torque setting.

Q: How do I change tires on a 2017 F350?
A: To change tires on a 2017 F350, first loosen the lug nuts on one side of the wheel using a tire iron. Then, lift up the wheel and remove it from the truck. Place the new tire onto the wheel hub and reattach it securely to your vehicle by tightening the lug nuts in a star pattern until they are snug before torquing them to their specified torque setting.

Q: What is the procedure for removing rear wheels from a 2017 F350?
A: To remove rear wheels from a 2017 F350, first loosen all of the lug nuts with a tire iron. Then, lift up on one side of the wheel and remove it from your vehicle before repeating this process with all four wheels that require removal.

The 2017 Ford F-350 wheel torque specifications are as follows: Front axle – 150 ft-lbs, Rear axle – 200 ft-lbs. It is important to adhere to these specifications when installing wheels on a Ford F-350, as it will ensure the best performance and safety of the vehicle.