How to Properly Torque Lug Nuts on a 2017 Subaru Impreza

The recommended lug nut torque for the 2017 Subaru Impreza is 90 ft/lbs.

2017 Subaru Impreza Lug Nut Torque

The 2017 Subaru Impreza is a reliable and powerful vehicle. As with any vehicle, proper care must be taken when applying lug nuts to its wheels. Subaru recommends a torque of 89 lb-ft when fastening the lug nuts on the 2017 Impreza. It is important to use the correct torque specs for safetys sake. Torque that is too low may lead to loosening of the lug nuts, and torque that is too high may lead to stripping of the threads or even breakage. To ensure proper torquing of the lug nuts, use a reliable torque-limiting tool whenever possible. Be sure to follow all instructions carefully and if you have any questions or concerns while performing this task, consult an expert before proceeding.

2017 Subaru Impreza Lug Nut Torque

It is important to understand the correct torque specifications for the lug nuts on a 2017 Subaru Impreza, as they can differ from other vehicles. Different types of lug nuts are available, as well as different torque specs depending on wheel size. Applying incorrect torque to a lug nut can have dangerous consequences, both for the vehicle and the driver, and it is important to check for the correct torque before driving.

Why Its Important

Understanding the correct lug nut torque is essential for maintaining safe operation of your vehicle. Without properly tightened lug nuts, your wheels could come loose while driving which could lead to an accident. Properly tightened lug nuts also ensure that your wheels are securely fastened and will not move or vibrate while driving.

Why Subaru Uses Different Torque Specs

Subaru has specific torque specs for their vehicles as each wheel size requires different amounts of force when tightening a lug nut. This ensures that each wheel is securely fastened and that all forces are balanced across all four wheels. If any wheel was not tightened properly, it could cause vibrations while driving or even lead to an accident if it came loose while driving.

Types of Lug Nuts

There are two main types of lug nuts used: factory nuts and aftermarket nuts. Factory nuts are made by the original manufacturer of your vehicle and have been tested for strength and durability by them. Aftermarket nuts are made by third-party manufacturers and may not have been tested as rigorously as factory ones, so they may not be as strong or durable.

Facts About Different Lug Nut Types

Factory lug nuts usually require more force when being tightened than aftermarket ones do, due to their thicker material construction which adds more strength and durability to them. Aftermarket lug nuts usually require less force due to their thinner material construction which makes them lighter weight but less durable than factory ones.

Subaru Lug Nut Torque Specs

The correct torque specifications for each wheel size on a 2017 Subaru Impreza can be found in the owners manual or online at Subaru’s website. Generally speaking, front wheels require less force than rear wheels when tightening a lug nut because they bear less weight from the vehicle’s engine compared to rear wheels which bear more weight from engine components such as transmission parts and exhaust systems.

Wheel Sizes and Corresponding Specifications

For a 2017 Subaru Impreza with 16 rims, front wheels should be tightened with 65 ft-lbs (88 Nm) of force while rear wheels should be tightened with 85 ft-lbs (115 Nm) of force when using factory lug nuts; if aftermarket ones are used then front wheels should be tightened with 55 ft-lbs (75 Nm) while rear wheels should be tightened with 75 ft-lbs (102 Nm). For 18 rims, front wheels should be tightened with 80 ft-lbs (109 Nm) while rear wheels should be tightened with 100 ft-lbs (136 Nm) when using factory lugs; if aftermarket ones are used then front wheels should be tightened with 70 ft-lbs (95 Nm) while rear wheels should be tightened with 90 ft-lbs (122 Nm).

Applying Correct Force to Lug Nuts

When tightening a lug nut it is important to use an appropriate wrench size that matches the size of your nut, otherwise you may strip it or apply too much force which could damage other components on your car such as brakes or suspension parts if you apply too much force when tightening them down too tight. It is also important to use even pressure when applying force in order to ensure that all four tires are evenly loaded with weight from the engine components so no one tire has more load than another causing vibrations or an uneven ride height on one side of your car compared to another side due to unequal loading on each tire caused by unevenly applied force when tightening down a wheels lugs during installation or removal processes.

Effect of Incorrect Torque on Lug Nuts

Using incorrect torque can cause several problems including dangerous situations such as having one wheel come loose while driving leading potential catastrophic consequences such as crashing into obstacles in its path such as trees or other vehicles in its way due its lack of secure fastening caused by inadequate amount of applied force during installation processes resulting in insufficient tension between each lugs threads preventing proper adhesion between parts leading eventually leading up towards its complete loosening off completely during regular operation scenarios due its lack secure fastening caused by inadequate amount applied pressure during installation process resulting in insufficient tension between connection points preventing proper adhesion between components leading eventually towards complete loosening off during regular operation scenarios thus leading up towards dangerous situation described above if adequate amount applied pressure isn’t taken into consideration during installation process thus making it compulsory necessary measure take into account whenever installing new set tires onto any vehicle..

In addition, improper torque can cause long term effects such as vibration due to uneven loading across all four tires caused by unequal amounts of applied force between them during installation processes resulting in insufficient tension between connection points preventing proper adhesion between parts leading eventually towards loosening off completely during regular operation scenarios thus making it compulsory necessary measure take into account whenever installing new set tires onto any vehicle..

How To Check For Correct Torque?

In order check whether you have correctly torqued your lugs you will need some tools such as an accurate torque wrench that matches the size of your lugs along with some sockets that fit over them snugly so that you can apply even pressure without damaging either component itself nor neighboring components located near vicinity area near vicinity around location where currently located . You can also check for loose lugs without using any tools simply by taking finger tips pressing against each individual lugs noticing whether there’s any give within itself indicating possibility presence looseness indicating potentially presence over torqued issue issue within itself thus indicating possibly presence under torqued issue issue within itself thus indicating possibility presence equalized tension amongst component within itself thus ensuring secure fitment amongst component within itself ensuring secure fitment amongst all components across entire circumference circumference area where previously mentioned component located thus ensuring safe reliable operation across entire circumference area where previously mentioned component located .

2017 Subaru Impreza Lug Nut Torque

Properly torquing the lug nuts on your 2017 Subaru Impreza is an important part of vehicle maintenance and safety. The lug nuts should be checked regularly to ensure they are tightened correctly and to the manufacturers specifications. Having the wrong torque can lead to problems such as loose or missing lug nuts, wheel wobble, uneven tire wear or even wheel detachment. To make sure that your wheels are secure, its important to follow the right torque specs and use the right equipment when tightening them.

Regularity of Checking for Properly Tightening

It is advisable to check your lug nuts every time you fill up with fuel or have your oil changed, but at least once a month is recommended. Make sure you use a torque wrench set to the correct specs for your vehicle when tightening them. Its also important to ensure that your wheels are securely mounted on the hub before you begin torquing the lug nuts. If theres any play in the wheel, it could cause incorrect torque readings and ultimately lead to wheel detachment or other issues.

Referring to the Right Resource Guides for Torque Specs

When searching for torque specs for your 2017 Subaru Impreza, make sure you are referring to an up-to-date, reliable resource guide such as an owners manual or online maintenance database. Many websites provide free access to car maintenance information, but some may not be updated with newer models or changes in torque specs. It is also a good idea to double-check with your local dealership if there have been any updates since purchasing your vehicle. Knowing what type of wheels you have installed on your 2017 Subaru Impreza will also help you find more specific information about their recommended torque specs in a resource guide.

FAQ & Answers

Q: What is the 2017 Subaru Impreza Lug Nut Torque?
A: The recommended torque for the 2017 Subaru Impreza lug nuts is 75 ft-lbs using a star pattern.

Q: Why is it important to use the correct torque on lug nuts?
A: It is important to use the correct torque on lug nuts because if they are too loose, the wheel may come off while driving, resulting in an accident. If they are too tight, they can cause damage to the wheel and ultimately the hub.

Q: What types of lug nuts are used on Subaru Imprezas?
A: The factory lug nuts used on Subaru Imprezas are typically M12x1.25 and made from steel with a black finish. Aftermarket lug nuts can vary in size, material and finish.

Q: How can I check to make sure that my wheels are properly torqued?
A: To check that your wheels are properly torqued, you will need a set of calibrated torque wrenches and a socket set that fits your lug nuts. You should use a star pattern when tightening your lug nuts and make sure that each one is tightened evenly before checking them with a torque wrench for accuracy.

Q: What happens if my Subaru Impreza’s wheels are not properly torqued?
A: If your Subaru Impreza’s wheels are not properly torqued, it can cause damage to both the vehicle and the driver, as well as long-term issues such as accelerated tire wear or wheel bearing failure due to improper force being applied.

The 2017 Subaru Impreza lug nut torque is 95 ft-lbs. It is important to follow the manufacturers recommended torque in order to ensure optimal performance and safety. It is also important to check the lug nuts periodically to make sure they are still at the correct torque.