3.6 Pentastar Head Replacement Cost: Get the Facts on What You Need to Know

The cost of replacing the 3.6 Pentastar engine head is approximately $1,400 to $2,000.

3.6 Pentastar Head Replacement Cost

Replacing the 3.6 Pentastar head can be a costly endeavor. There are a variety of factors that contribute to the overall cost, such as labor, parts and taxes. The labor required for this job depends on the complexity of the repair, with most mechanics charging anywhere from $400 to $1000 dollars. On top of that, quality replacement parts can range from $150 to $800 depending on the model. Additionally, taxes and fees may be added to this total depending on locality. All these factors should be taken into consideration when calculating the overall expense of replacing your 3.6 Pentastar head.

3.6 Pentastar Head Replacement Cost

Introduction
Replacing a 3.6 Pentastar head is a complex procedure that requires special knowledge and skill. It involves removing the engine components, replacing the head, and putting everything back together. The cost of such a replacement depends on several factors, including the car model, the amount of damage to the head, and whether or not labor costs are included in the estimate.

Components of Head Replacement

Auto Parts
Replacing a 3.6 Pentastar head requires several parts, including gaskets and seals, spark plugs and wires, valve cover gaskets, intake manifold gaskets, exhaust manifold gaskets, and other miscellaneous parts needed for installation. The exact list of required parts may vary slightly depending on the make and model of car being worked on.

Labor Cost
In addition to the parts needed for replacement of a 3.6 Pentastar head, labor costs should also be taken into account when estimating the total cost of replacement. Labor costs can vary widely depending on the experience level of the mechanic performing the work as well as any additional services that may be required to complete the job properly.

Factors Affecting Head Replacement Cost

Car Model
The make and model of car being serviced will have an effect on both auto parts and labor costs associated with replacing a 3.6 Pentastar head. Different models may require different parts or take different amounts of time to complete due to differences in design or complexity level from one make or model to another.

Damage Assessment
The amount of damage done to the 3.6 Pentastar head is another factor that can affect both auto parts and labor costs associated with replacing it. If there is significant damage to any part or component related to replacing a 3.6 Pentastar head it may require additional time or cost for repair or replacement before installation takes place which can add significantly to overall cost estimates for replacement services.

Benefits of Replacement of 3.6 Pentastar Head

Improved Performance
Replacing a 3.6 Pentastar head can have several benefits beyond just restoring performance levels that were lost due to damage or wear over time. Replacing this type of head can provide increased power output as well as improved fuel efficiency when compared with older models due to advances in technology over time which can help improve overall driving experiences for those who choose this type of replacement service over other options available in terms of repair or restoration efforts for their vehicles engines and related components .

Extended Service Life
Replacing a 3.6 Pentastar head can also extend its service life by reducing wear on related components due to improved manufacturing processes used for this type of part today when compared with older models which were susceptible to more frequent breakdowns due to material composition differences between older production methods used in prior years versus those used today . This added longevity can save drivers money in terms maintenance expenses over time when compared with cars utilizing older versions heads without any upgrades or replacements performed during maintenance cycles .

Manufacturers that Deliver 3.6 Pentastar Heads

Mopar Parts Plus
Mopar Parts Plus is an independent automotive supplier offering original equipment manufacturer (OEM) quality aftermarket products including genuine Chrysler-manufactured heads suitable for use with most models using a 3.6 liter engine size such as those made by Dodge and Jeep vehicles built between 2011-2018 . Their selection includes complete cylinder heads featuring new valves , springs , lifters , retainers , camshafts , timing chains , oil pumps , water pumps , thermostats , exhaust manifolds as well as other related components all backed by manufacturer warranties .

DNJ Rock DNJ Rock is another independent automotive supplier offering aftermarket products specializing in providing complete cylinder heads suitable for use with most models using a 3liter engine size such as those made by Dodge and Jeep vehicles built between 2011-2018 . Their selection includes new valves , springs , lifters , retainers , camshafts , timing chains , oil pumps , water pumps , thermostats , exhaust manifolds as well as other related components all backed by manufacturer warranties . They also offer specialized services such as cylinderhead repair & resurfacing so customers have access to comprehensive solutions regardless if their need is for new replacements or repairs before installation takes place .

3.6 Pentastar Head Replacement Cost

Replacing the head of a 3.6 Pentastar engine can be a costly endeavor, but it doesn’t have to be if you know what you’re doing. The first step is to understand what the common issues are with the 3.6 Pentastar engine and the average cost range of replacement heads. This article will discuss these topics in detail, as well as provide warranty coverage and alternative replacement cost options.

Common Issues with 3.6 Pentastar Engines

The most common issues with 3.6 Pentastar engines are oil consumption and coolant leaks. Oil consumption can be caused by worn or cracked piston rings, allowing oil to bypass the rings and enter the combustion chamber, resulting in increased oil consumption. Coolant leaks can also be caused by worn or cracked gaskets, resulting in coolant loss which can lead to overheating and other engine damage.

Average Price Range of 3.6 Pentastar Heads

The average price range of replacement heads for the 3.6 Pentastar engine depends on whether you buy new OEM parts or used/rebuilt parts from a third party vendor. New OEM parts typically range from $800-$1,500 while used/rebuilt parts from third parties usually run around $200-$400 depending on the condition of the part and its availability at your local shop or online store.

Warranty Coverage on Replacement Head

Manufacturer specific warranty guidelines vary when it comes to coverage for head replacements for 3.6 Pentastar engines but typically include coverage for parts and labor costs associated with replacing a defective head component due to normal wear and tear or manufacturing defects within a certain time period from purchase date or install date if purchased from an authorized dealer/shop/retailer . Some manufacturers may also offer different categories of coverage with varying levels of benefits depending on whether it’s a new OEM part or used/rebuilt part purchased from a third party vendor that includes extended warranties as well as roadside assistance benefits during certain times throughout its lifetime ownership period.

Alternatives to Head Replacement Cost

If replacing a defective head component is too expensive or not necessary, there are several alternatives available such as refurbishing the existing head component instead of purchasing an entirely new one or purchasing refurbished heads from third parties who specialize in this type of work at much lower prices than buying new OEM parts alone would cost you. Refurbishing involves cleaning up, inspecting, testing and restoring any worn out components back to their original specifications so that they can function properly once again without having to replace them entirely which helps save money in the long run since it’s usually much cheaper than buying new components outright every time something goes wrong with your engines head component .

FAQ & Answers

Q: What is the cost of replacing a 3.6 Pentastar head?
A: The cost of replacing a 3.6 Pentastar head will vary based on factors such as car model, damage assessment, and choice of auto parts and labor. The cost typically ranges from $500 to $2500.

Q: What are the benefits of replacing a 3.6 Pentastar head?
A: Replacing a 3.6 Pentastar head can help improve engine performance and extend its service life.

Q: Who manufactures 3.6 Pentastar heads?
A: There are several manufacturers that produce 3.6 Pentastar heads, including Mopar Parts Plus and DNJ Rock.

Q: What are common issues with 3.6 Pentastar engines?
A: Common issues with 3.6 Pentastar engines include oil consumption and coolant leaks.

Q: Does the replacement head come with a warranty?
A: Each manufacturer has their own specific warranty guidelines for replacement heads, however most offer some level of coverage for both parts and labor costs associated with the replacement process.

The cost of replacing a 3.6 Pentastar head can vary significantly depending on the location, parts used, and labor involved. On average, the cost for this type of replacement ranges from $1000-$1500. It is important to get a quote from a trusted mechanic or dealership before starting any repair work.