Instructions for assembling a Mainstays Bathroom Space Saver can be found in the included user manual.

Assembly Instructions Mainstays Bathroom Space Saver Instructions

The Mainstays Bathroom Space Saver Instructions provide an easy-to-understand guide on how to install and properly assemble a bathroom space saver. With included simple steps and illustrations, this detailed instruction set helps to ensure that your space saver is securely and efficiently assembled. This guide covers everything from the appropriate tools to use for installation, to how to properly align the different components of your space saver. Additionally, the instructions outline how to attach your space saver securely with wall anchors and caulking, as well as clear pictures of what each step should look like when completed. This instruction manual is packed with clarity and ease of use – making it an ideal resource for those looking to effectively utilize their bathrooms storage space.

Assembly Instructions Mainstays Bathroom Space Saver Instructions

Introduction: The Mainstays Bathroom Space Saver is an economical and efficient way to add storage and organization to any bathroom. This compact unit features a unique design that allows it to fit snugly in tight spaces, while still providing plenty of storage space. With its easy-to-follow assembly instructions, you can quickly and easily install your new bathroom space saver.

Necessary Tools: Before you begin the assembly process, make sure you have all the necessary tools on hand. These include a drill, Phillips head screwdriver, adjustable wrench, a level, and wall anchors for drywall installation.

Step 1: Place Your Bathroom Space Saver on the Floor

Floor Considerations: Before placing your bathroom space saver on the floor, take into consideration the type of flooring material present. If you are installing on hardwood or tile floors, make sure to use felt pads or rubber bumpers to protect against scratching or damage. Additionally, you may want to lay down a non-slip mat to help keep the unit in place while you are assembling it.

Assembling Tools: To assemble your Mainstays Bathroom Space Saver unit, you will need a Phillips head screwdriver and an adjustable wrench. You may also find it helpful to have an extra set of hands available to help hold pieces in place while you secure them together.

Step 2: Securely Fasten the Wall Brackets to the Wall Studs

Lining Up the Brackets: Begin by lining up each wall bracket with its corresponding wall studs so that they are parallel with one another. Make sure that each bracket is securely fastened with screws before proceeding with assembly.

Screwing in the Brackets: With each bracket firmly aligned with its corresponding studs, use your Phillips head screwdriver to securely fasten each one into place by driving screws through pre-drilled holes until theyre snugly tightened against the wall studs.

Step 3: Installing Attachment Screws into Wall Brackets

Threaded Inserts Into Top Shelf Bracket: Once both brackets are securely fastened into place on the wall studs, install two threaded inserts into top shelf bracket using your drill and Phillips head screwdriver. These inserts will be used later when securing shelves onto brackets using connection screws.

Placement of Connection Screws: Position four connection screws evenly spaced along bottom shelf bracket so that they are flush with surface of bracket when tightened down later during assembly process.

Step 4: Bolting Together the Unit’s Outer Rails and Shelves Together

Locating Bolts in Pre-Drilled Holes: Locate all necessary bolts needed for bolting together outer rails and shelves within pre-drilled holes located along sides of unit frame prior to assembly process beginning in earnest. Tightening Connecting Bolts : Once all necessary bolts have been located within pre-drilled holes along sides of unit frame, begin tightening connecting bolts until they are snugly tightened against outer rails and shelves of unit frame before proceeding with final step of installation process

Assembly Instructions Mainstays Bathroom Space Saver Instructions

Step 1: Unpacking and Positioning Unit

Before beginning the assembly of your Mainstays Bathroom Space Saver, make sure the area you plan to install it is clear of any obstructions. Carefully unpack the unit and remove all instructions, hardware, and components. Position the unit in the desired location ensuring that there are no obstructions to door or drawer operation.

Step 2: Attaching Wall Brackets

Using a level to ensure proper alignment, attach the two wall brackets included in packaging to either side of your wall. Securely fasten into place using appropriate hardware for your wall material. Make sure both brackets are at the same height with a level once firmly attached.

Step 3: Attaching Top Shelf

Line up pre-drilled holes on outer side rails with corresponding holes on top shelf and insert screws into each hole with an appropriate screwdriver. Make sure all screws are securely tightened into place and that top shelf is firmly attached to side rails.

Step 4: Installing Curved Panels

Attach two curved panels onto two outside rails using included hardware. Be sure to keep them level while installing and tighten screws securely after positioning them in place.

Step 5: Securing Top Shelf to Wall Bracket

Finding Closet Insert Washers and Nuts – Threading Closet Insert Washers and Nuts
To secure the top shelf to the wall bracket, locate the closet insert washers and nuts shipped with the unit. Thread one washer through each pre-drilled hole on top shelf before securing each nut into place using an appropriate screwdriver or wrench.

Step 6: Hanging Curved Panels to Corresponding Tabs on Two Outside Rails

Finding Three Dowels Shipped with Unit – Aligning Dowel with Panels and Rails
To hang curved panels onto corresponding tabs on two outside rails, locate three dowels shipped with unit. Align one dowel with each panel before carefully pushing it into position until firmly secured between panel and rail.

Step 7: Taking out Plastic Covers and Fixing to Wall With Two Mounting Holes

< Establishing Levelness of Deeper Baskets - Securing Plastic Covers Into Wood Rafters
To mount plastic covers to wall, take out plastic covers from packaging along with two mounting holes provided for each cover. Using a level for accuracy, check for levelness of deeper baskets before securing plastic covers into wood rafters using appropriate hardware.

Step 8: Fitting Magnetic Catch onto Back Astragal Strip of Upper Shelf

< Finding Appropriate Striker Plate for Magnetic Catch - Making Sure Deep Wire Basket Fits Tightly Together
To finish off assembly of your Mainstays Bathroom Space Saver, fit magnetic catch onto back astragal strip of upper shelf before finding an appropriate striker plate for magnetic catch from packaging. Lastly, make sure deep wire baskets fit tightly together so that they are secure when closed.<

FAQ & Answers

Q: What is the Mainstays Bathroom Space Saver?
A: The Mainstays Bathroom Space Saver is a shelving unit designed to optimize storage in small bathrooms. It features three shelves, two curved panels and two baskets that can be mounted to the wall.

Q: What tools are needed to assemble the Mainstays Bathroom Space Saver?
A: You will need a drill, screwdriver, and a wrench or socket set to assemble the Mainstays Bathroom Space Saver. Additionally, you will need a level for proper installation of the wall brackets.

Q: How do I install the attachment screws into the wall brackets?
A: First, you will need to locate the threaded inserts in the top shelf bracket. Insert two screws through these inserts and make sure they are firmly secured into place. Then, place connection screws into wall brackets and tighten them securely.

Q: How do I secure the top shelf to the wall bracket?
A: You will need to locate closet insert washers and nuts that were shipped with your unit. Thread these onto your connection screws until they are firmly secured in place. Then, hang your curved panels onto corresponding tabs on two outside rails of your unit.

Q: How do I install plastic covers onto my Mainstays Bathroom Space Saver?
A: First, take out the plastic covers that were shipped with your unit and fit them onto two mounting holes on your wall bracket. Make sure they are level with each other before securing them into wood rafters or plasterboard walls with additional screws or nails (if necessary). Finally, fit a magnetic catch onto back astragal strip of upper shelf and attach an appropriate striker plate for it.

In conclusion, the Mainstays Bathroom Space Saver is an easy-to-assemble piece of furniture that can help you create more storage space in your bathroom. With clear instructions, the assembly process should be relatively straightforward and can be completed in a short amount of time.