What Are the Best Jeep XJ Shocks for a 2” Lift? – A Comprehensive Guide
If you’re looking for the best way to upgrade your Jeep XJ’s suspension, then consider a 2″ lift combined with a set of shocks specifically designed for the XJ. This combination will not only improve handling and off-road performance, but it will also give your vehicle a more aggressive look. With the right shocks, your Jeep XJ can be transformed from stock into an off-road beast that can handle any terrain. Investing in the best shocks for your XJ will ensure maximum ride comfort and superior control over rough terrain. From basic OEM replacements to high-performance shocks, we’ll discuss everything you need to know about finding the perfect shock for your Jeep XJ.
Why Best Jeep Xj Shocks 2” Lift Is Necessary?
A 2″ lift on the Jeep XJ shocks is necessary to provide the necessary clearance between the frame and axles to ensure that they perform properly. Without this extra clearance, the suspension components may not be able to move freely, which could cause premature wear or even damage. Additionally, a 2″ lift improves ground clearance, allowing drivers to traverse more difficult terrain with ease.
Comperision Chart for Best Jeep Xj Shocks 2” Lift
Fox 2.0 Performance Shock compatible with 1984-2001 Jeep Cherokee 4WD w/4-6″ Lift XJ
Bilstein 5100 Monotube Gas Shock Set compatible with 1984-2001 Jeep Cherokee XJ w/2-3″ Lift
Fox 980-24-643 985-24-086 Compatible with 1984-2001 Jeep Cherokee w/2-3.5″ Lift XJ 2.0 Shock Set
Rough Country XJ 1-3″ N3 Front Shock Absorbers for 97-06 Jeep TJ | 84-01 XJ – 23169_E
Bilstein 24-185943 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Shock Absorbers for 84-01 Jeep Cherokee XJ 4WD 5-6in Lift
Fox 2.0 Performance Shock compatible with 1984-2001 Jeep Cherokee 4WD w-4-6 Lift XJ
If you are looking for the perfect suspension system to upgrade your 1984-2001 Jeep Cherokee 4WD with a 4-6″ lift, then you can’t go wrong with the Fox 2.0 Performance Shock. With part numbers 985-24-042 and 985-24-065, you’ll be getting two front and two rear shock absorbers that provide superior performance, durability and ride quality. The shocks are extended length for front lifts of 4 to 6 inches, and rear lifts of 5 to 6.5 inches. All necessary washers, bushings, reservoir clamps, and nuts are included for installation with factory shock mounting bolts being reused. Shock boots and roost shields must be purchased separately as well as mounting plates. Fox offers a one year warranty on this product.
Why We Like This
Extended length shocks for 4-6″ front lift systems and 5-6.5″ rear lift systems
Durable construction with superior performance
All necessary washers, bushings, reservoir clamps, and nuts included
Factory shock mounting bolts reused for installation
One year warranty from Fox
Common Questions & Answers
Q: Does this product fit RWD vehicles?
A: Yes, it fits both 4WD and RWD vehicles.
Q: Does this product come with shock boots or roost shields?
A: No, they must be purchased separately.
Q: Is there a warranty on this product?
A: Yes, Fox provides a one year warranty on the Fox 2.0 Performance Shock compatible with 1984-2001 Jeep Cherokee 4WD w/4-6″ Lift XJ
Additional Product Information
| Height | 38 |
| Length | 10 |
| Weight | 25 |
| Width | 8 |
Bilstein 5100 Monotube Gas Shock Set compatible with 1984-2001 Jeep Cherokee XJ w-2-3 Lift
If youre looking for a way to upgrade your 1984-2001 Jeep Cherokee XJ with a 2-3″ lift, look no further than the Bilstein 5100 Monotube Gas Shock Set. This set of four shock absorbers are designed with extended length to fit the exact specifications of your Jeep, and they come complete with all necessary washers, bushings, reservoir clamps, and nuts. For an added bonus, they also come with Bilsteins limited lifetime warranty for peace of mind.
Why We Like This
Part Numbers 24-185622 and 24-185639 – These are the exact part numbers for this specific model of shock absorber, ensuring that you get the right product for your Jeep.
Fits 4WD & RWD Vehicles – These shocks are designed to work on both 4WD and RWD vehicles so you dont have to worry about compatibility issues.
All Necessary Hardware Included – Washers, bushings, reservoir clamps, and nuts are included in the package so you dont have to worry about buying extra parts.
Reuses Factory Bolts – The factory shock mounting bolts can be reused for installation which saves time and money during installation.
Bilstein Limited Lifetime Warranty – You can rest assured knowing that your shocks are covered by a limited lifetime warranty from Bilstein.
Common Questions & Answers
Q: Is this product compatible with my 1984-2001 Jeep Cherokee XJ?
A: Yes! This product is specifically designed for 2-3″ lifts on the 1984-2001 Jeep Cherokee XJ making it compatible with your vehicle.
Q: Does this product include all necessary hardware?
A: Yes! This product includes all washers, bushings, reservoir clamps, and nuts necessary for installation.
Q: Can I reuse my factory shock mounting bolts?
A: Yes! The factory shock mounting bolts can be reused for installation which saves time and money during installation.
Additional Product Information
| Height | 30 |
| Length | 10 |
| Weight | 25 |
| Width | 10 |
Fox 980-24-643 985-24-086 Compatible with 1984-2001 Jeep Cherokee w-2-3.5 Lift XJ 2.0 Shock Set
Are you looking for a shock set to upgrade your 1984-2001 Jeep Cherokee with a 2-3.5″ Lift XJ 2.0? Fox 980-24-643 985-24-086 is the perfect choice! This set of four shocks is compatible with both 2WD and 4WD vehicles and includes all the necessary washers, bushings, and nuts for installation. The monotube gas charged shocks have a 2-inch aluminum seamless alloy body that is both rebuildable and nitrogen gas rechargeable. Shock boots and roost shields are sold separately. Fox’s limited one (1) year warranty protects against defects and premature failure.
Why We Like This
Compatible with both 2WD & 4WD vehicles and includes all necessary washers, bushings, and nuts for installation
Monotube gas charged shocks with a 2-inch aluminum seamless alloy body
Rebuildable and nitrogen gas rechargeable
Shock boots & roost shields sold separately
Fox’s limited one (1) year warranty
Common Questions & Answers
Q: What vehicles does this shock set fit?
A: This shock set is compatible with 1984-2001 Jeep Cherokee with a 2-3.5″ Lift XJ 2.0.
Q: What type of shocks are these?
A: These are monotube gas charged shocks with a 2-inch aluminum seamless alloy body, which are rebuildable and nitrogen gas rechargeable.
Q: Does this product come with a warranty?
A: Yes, Fox offers a limited one (1) year warranty protecting against defects and premature failure on this product.
Additional Product Information
| Length | 38 |
| Weight | 0.000625 |
| Width | 10 |
Rough Country XJ 1-3 N3 Front Shock Absorbers for 97-06 Jeep TJ – 84-01 XJ – 23169_E
Rough Country’s XJ 1-3″ N3 Front Shock Absorbers for 97-06 Jeep TJ and 84-01 XJ are the perfect addition to any off-roading adventure. With 10 Stage Variable Valving, a Military Fluid Rated To -50 Degrees C and Nitrogen Charging, these shocks have been designed to keep you in control no matter the terrain. The shock absorbers also feature a fast cooling 54mm Shock Body, Spring Loaded Piston Rod Seal and Military Spec. Fluid Rated To -40? C, giving you complete confidence when taking on the toughest of trails. And with Rough Country’s Limited Lifetime Replacement Warranty backing them, you can rest assured that your shocks won’t let you down.
Why We Like This
10 Stage Variable Valving: Provides maximum performance in any terrain
Military Fluid Rated To -50 Degrees C: Ensures reliable operation in extreme conditions
Nitrogen Charged: Reduces fade and ensures consistent performance
Fast Cooling 54mm Shock Body: Keeps your shocks cool for maximum performance
Spring Loaded Piston Rod Seal: Ensures consistent performance over time
Common Questions & Answers
Q: Is this product backed by a warranty?
A: Yes, Rough Country’s XJ 1-3″ N3 Front Shock Absorbers are backed by Rough Country’s Limited Lifetime Replacement Warranty.
Q: What type of fluid is used in these shocks?
A: These shocks are filled with Military Grade Fluids rated to -50 Degree Celsius and -40 Degree Celsius respectively.
Q: Does the product come with bushings?
A: Yes, the shock absorbers come with rubber bushings for added durability and 36kN Tensile Strength.
Additional Product Information
| Length | 25.25 |
| Weight | 12 |
| Width | 5.75 |
| Size | 1-3″ |
Bilstein 24-185943 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Shock Absorbers for 84-01 Jeep Cherokee XJ 4WD 5-6in Lift
Are you looking for a reliable set of shock absorbers for your Jeep Cherokee XJ 4WD 5-6in Lift? Look no further than Bilstein 24-185943 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Shock Absorbers. This set includes two front monotube gas-charged shock absorbers that have been designed specifically for the 1984 to 2001 Jeep Cherokee XJ with a 5-6 inch lift. Not only are these shock absorbers reliable but they offer superior handling and performance.
Why We Like This
Collapsed Length of 16.97 inches for a better fit.
Extended Length of 28.44 inches for better suspension performance.
Zinc plated finish to protect against corrosion and rusting.
No reservoir built into the shocks, helping reduce weight and complexity.
Smooth body design with 46mm ID for improved comfort and stability on the road.
Common Questions & Answers
Q: What is the maximum weight capacity?
A: The Bilstein 24-185943 B8 5100 Series Set of 2 Front Monotube Replacement Gas Charged Shock Absorbers have a maximum weight capacity of up to 7,000 pounds (3,175 kg). This makes them an ideal choice for Jeep Cherokees with larger lifts and heavier loads.
Q: Are these shocks adjustable?
A: Yes, they are adjustable in terms of rebound and compression damping, allowing you to tailor them to your specific needs and driving style.
Q: How easy is it to install these shocks?
A: Installation is relatively straightforward as long as you have the correct tools; all necessary hardware is included in the package so there should be no extra trips to the store required!
Additional Product Information
| Length | 28 |
| Weight | 13 |
| Width | 6 |
Benefits of Best Jeep Xj Shocks 2” Lift
1. Improved ride comfort: The increased lift of the shocks will provide a smoother ride over rough terrain and better handling when cornering.
2. Increased ground clearance: The increased lift of the shocks will allow for more clearance under the vehicle, allowing you to navigate more challenging off-road terrain.
3. Better performance: The additional height of the shocks will improve the performance of your Jeep XJ by allowing for better traction and control.
4. Improved aesthetics: The increased height of the shocks will give your Jeep XJ an aggressive and stylish look that will stand out from other vehicles on the road.
Buying Guide for Best Jeep Xj Shocks 2” Lift
Types of Jeep XJ Shocks 2” Lift
When it comes to the best Jeep XJ shocks for a 2” lift, there are several different types available. The most popular types are:
– Monotube Shocks: Monotube shocks are designed to provide superior damping and performance. They feature a large single tube that houses the shock absorber and oil, as well as an adjustable valve system that allows you to fine-tune the damping performance. Monotube shocks are generally considered to be the best choice for off-road driving and aggressive use.
– Twin Tube Shocks: Twin tube shocks feature two tubes, one inside the other, with a sealed chamber in between that houses the oil and gas. These shocks offer less damping performance than monotubes but still provide good control over ride quality and handling characteristics. They are often used on vehicles with stock suspension setups because of their cost-effectiveness.
– Adjustable Shocks: Adjustable shocks feature a variety of settings that allow you to fine-tune your ride quality and handling characteristics according to your needs. These shocks offer more adjustability than standard monotubes or twin tubes, but they tend to be more expensive than their non-adjustable counterparts.
Considerations for Choosing Jeep XJ Shocks 2” Lift
When selecting the best Jeep XJ shocks for a 2” lift, there are several factors you should consider before making a purchase:
– Ride Quality: Your first priority should be ride quality; after all, comfort is key when it comes to off-roading! Monotube shocks tend to offer better damping performance than twin tube or adjustable models, so if you want superior ride quality then consider investing in monotubes.
– Durability: If you do lots of off-roading then you need shock absorbers that can stand up to tough terrain; otherwise they’ll wear out quickly and need replacing frequently. Monotubes tend to be more durable than twin tubes or adjustable options, so they’re a better choice if longevity is important to you.
– Cost: Depending on your budget, cost will likely have some influence over your decision making process when it comes time to buy new Jeep XJ shocks for a 2” lift. Keep in mind that although monotubes tend to offer superior performance and durability, they also tend to be more expensive than twin tube or adjustable options.
Features of Different Brands
Different brands of shock absorbers offer various features that may appeal depending on your needs and preferences; here’s an overview of some of the features offered by different brands:
– Fox Shocks: Fox offers several different types of shock absorbers specifically designed for Jeeps including monotube and adjustable models with features like rebound tuning capabilities and improved durability due to their internal floating piston design.
– Skyjacker Suspensions: Skyjacker offers both monotube and twin tube shock absorbers with features like nitrogen charged dampers for improved response time as well as longer travel capabilities due to their unique design.
– Bilstein Suspension Systems: Bilstein is known for producing high quality shock absorbers that offer superior durability even in extreme conditions thanks to their patented monoTube gas pressure construction technology which helps them handle higher temperatures without any loss in performance or comfort levels.
In conclusion, the Best Jeep XJ Shocks 2″ Lift is an excellent choice for those who want a reliable and affordable lift kit. It provides increased ground clearance, improved handling and stability, and a more comfortable ride. The shocks also help reduce road noise and vibration while providing a more responsive ride. With its quality components, ease of installation, and generous warranty coverage, the Best Jeep XJ Shocks 2″ Lift is an excellent choice for any Jeep XJ owner.
Author Profile
-
Welcome to Liberty Is Viral, a digital nexus where curiosity is the currency and knowledge is the merchandise. We are not just another blog on the block; we are a movement, a collective of inquisitive minds committed to the ethos of liberating information and empowering individuals.
Our journey began with a simple yet profound belief: knowledge should be accessible to all, unrestricted by barriers, free as the air we breathe. Thus, in the bustling digital landscape of 2023, LibertyIsViral.com was reborn, a revitalized platform poised to quench the intellectual thirst of discerning netizens. And we can say we are a bit successful on that, since our community is expanding by the day (20,000 readers and increasing!)
Latest entries
- March 22, 2023AppliancesThe Best 2 Inch Brass Fire Hose Nozzle for Maximum Firefighting Efficiency
- March 22, 2023AppliancesElevate Your Brand with the Best Custom Next Service Due Stickers
- March 22, 2023Lawn, Patio And Exterior5 Best Bird Netting Solutions for Protecting Cherry Trees
- March 22, 2023Apparel And JewelryFind the Best Drop Cut T-Shirt for Men: Our Top Picks