Troubleshooting Tips for When Your Bissell Little Green Dirty Water Tank is Not Filling

The Bissell Little Green Dirty Water Tank is likely blocked and needs to be cleared of debris before it can be filled.

Bissell Little Green Dirty Water Tank Not Filling

If you have a Bissell Little Green carpet cleaning machine but you’re having trouble getting the dirty water tank to fill up, it can be very frustrating. Fortunately, there is usually a simple explanation and fix. This article will provide an overview of the potential causes and solutions for this issue.

Potential causes include: a clogged inlet valve; an air leak; or the pump motor being blocked or failing due to age or wear. Solutions that might help include: clearing the clog, fixing any air leaks and/or replacing the pump motor.

To help diagnose the problem, take off the dirty water tank from your Bissell Little Green carpet cleaner and inspect it for loose connections or clogs in the inlet pipe or valve. Also check for leaks around any seals, as these should be firm and secure to prevent air leaks. If necessary, replace any faulty components with genuine parts from Bissell.

If your problem persists, try restarting your machine with a new batch of cleaning solution as this may resolve any issues related to blocked filters or pumps. Additionally, if your carpet cleaner is older than five years old, consider replacing the pump motor with a new part from Bissell as it may have worn out due to age.

Overall, most issues with Bissell Little Green dirty water tanks not filling can be resolved quickly with some simple troubleshooting steps and possibly replacing some outdated parts that are no longer effective. With just a few minutes of time and effort it’s usually possible to get your cleaner working again!

Troubleshooting Bissell Little Green Dirty Water Tank Not Filling

The first step in troubleshooting a Bissell Little Green dirty water tank not filling is to check the power source. Make sure the power cord is securely plugged into an electrical outlet and that the vacuum is turned on. If the power source checks out, then the next step is to identify what may be causing the issue.

It could be that there is an obstruction in either the suction inlet tube or water fill tube. If this is the case, then it will need to be cleared in order for the tank to fill. Additionally, if there is too much pressure on the On/Off switch, or if the brush control dial has been adjusted, then this could also cause water not to flow into the tank.

Maintenance Tips for Bissell Little Green Vacuum Cleaner

Regular maintenance of a Bissell Little Green vacuum cleaner can help prevent issues such as a dirty water tank not filling properly. One of the most important maintenance tips for this type of vacuum cleaner is to regularly clean and empty its water tank exterior. This should be done with a damp cloth and an all-purpose cleaner once a month or as needed. Additionally, after emptying and rinsing out its tank, it’s important to make sure it’s completely dry before adding any new cleaning solution.

Causes of Little Green Dirty Water Not Filling

If your Bissell Little Green vacuum’s dirty water tank isn’t filling properly, there are several possible causes that should be considered first. These include an impeded suction inlet tube which could be caused by debris buildup; an obstructed water fill tube; too much pressure on the On/Off switch; or an adjustment of the brush control dial which affects airflow inside of the cleaner’s system. All of these potential causes should be checked before moving onto more complex troubleshooting steps.

How To Unlock Bissell Little Green From Locked Position?

Bissell Little Green vacuums have a locking feature that keeps them from being accidentally turned on while they are being stored away or moved around. In order to unlock it from this position, simply remove its clean water tank from its vacuum cleaner body and push down on its reset button located inside of its handle area until you hear it click back into place. Once this has been done, your vacuum will be ready for use again!

How To Adjust Suction on a Bissell Little Green Vacuum?

If you find that your Bissell Little Green vacuum isn’t cleaning up dirt and debris as well as expected, then you may need to adjust its suction power setting. To do this, simply increase pressure on its On/Off switch until you reach your desired level of suction power; alternatively, if you need less suction power than normal then adjusting its brush control dial can also help achieve this goal without having to increase pressure on its On/Off switch too much. Once you have reached your desired suction level, your vacuum should start cleaning up dirt and debris more effectively than before!

How to Change Belt on a Bissell Little Green Vacuum?

Replacing the belt on your Bissell Little Green Vacuum is a relatively simple task. First, you will need to locate and remove the old belt from the motor shaft pulley. Once the old belt has been removed, you can then install the new belt around the motor shaft pulley and move it around the brush roller bar motor pulley. This will ensure that your vacuum is running efficiently with a new and properly installed belt.

Replacing Filter Bag on a Bissell Little Green Vacuum Cleaner?

When it comes time to replace the filter bag in your Bissell Little Green Vacuum Cleaner, you’ll need to first locate and remove the old filter bag. Once it is taken out, you can then insert and secure your new filter bag in place. Making sure that your vacuum has a fresh, clean filter bag installed will help keep it running at its best by reducing dust and debris build-up within the unit itself.

What are the Benefits of Owning a Bissell Little Green Vacuum?

Owning a Bissell Little Green Vacuum can provide you with many benefits. Firstly, these vacuums are able to provide high suction performance thanks to their powerful motors, making them ideal for cleaning carpets, rugs, upholstery and other surfaces quickly and effectively. Additionally, they are also incredibly portable due to their lightweight design which makes them perfect for taking with you when travelling or for moving around in your home or office easily.

Where to Buy Replacement Parts for Your Bissell Little Green Vacuum?

If you need replacement parts for your Bissell Little Green Vacuum, it’s important to make sure that you buy them from an authorised retailer so that they are genuine parts from reliable sources. Reputable online shopping options are available as well if you want added convenience while shopping for replacement parts. That way, you can be sure that you’re getting quality parts that will last long-term and ensure proper functioning of your vacuum cleaner.

FAQ & Answers

Q: How do I troubleshoot Bissell Little Green Vacuum Cleaner when the dirty water tank is not filling?
A: To troubleshoot a Bissell Little Green Vacuum cleaner with a dirty water tank that is not filling, first check the power source to ensure it is connected properly. Then identify the cause of the issue, which may be due to an impeded suction inlet tube or an obstructed water fill tube.

Q: How do I unlock my Bissell Little Green Vacuum from a locked position?
A: To unlock a Bissell Little Green Vacuum from a locked position, first remove the clean water tank from the vacuum cleaner. Then push the reset button located on the side of the machine.

Q: How do I adjust suction on a Bissell Little Green Vacuum?
A: To adjust suction on a Bissell Little Green Vacuum, increase pressure on the On/Off switch and adjust brush control dial located near this switch.

Q: How do I change belt on a Bissell Little Green Vacuum?
A: To change belt on a Bissell Little Green Vacuum Cleaner, install new belt around motor shaft pulley and move belt around brush roller bar motor pulley.

Q: How do I replace filter bag on a Bissell Little Green Vacuum Cleaner?
A: To replace filter bag on a Bissell Little Green Vacuum Cleaner, locate and remove old filter bag and insert and secure new filter bag in its place.

The Bissell Little Green Dirty Water Tank Not Filling issue is likely caused by a blocked filter or faulty pump. If the filter is blocked, it should be cleaned or replaced. If the pump is faulty, it should be checked and potentially repaired or replaced. Once these steps have been taken, the tank should fill correctly with clean water once again.