What Are the Differences between the Dana Super 60 and Dana 60 Axles?

The Dana Super 60 is a variation of the classic Dana 60 axle that offers increased strength and performance.

Dana Super 60 Vs Dana 60

The Dana Super 60 and Dana 60 are two distinct axle assemblies. The former is an aftermarket version of the latter, designed to provide superior performance and strength in heavy-duty off-roading and high-performance applications. The two axle assemblies vary greatly in terms of weight, size, and parts. At a glance, the most significant difference between the Dana Super 60 and Dana 60 is the axle shaft material. The Super 60 offers additional strength due to its aftermarket high-grade alloy steel construction, which produces a 33 percent increase in bearing capacity over its counterpart. Additionally, the Super 60 uses larger bearings on both sides of the axle assembly which reduces the chances of differential failure. In addition to this, its pinion gear is also reinforced with a much thicker gear face compared to the Dana 60. This ensures superior power distribution under heavy-duty applications and improved strength against bending forces. Furthermore, extra cover plates built into the assembly provide extra protection against wear or shock loads. Lastly, numerous design upgrades such as differentials locker system offers increased traction during extreme off-roading scenarios compared to a standard Dana 60 setup.

Dana Super 60 Vs Dana 60

Dana is a prominent brand in the automotive aftermarket, and the Dana Super 60 axle is a popular upgrade over the traditional Dana 60. The differences between these two axles are numerous, and can be seen in terms of key features, cost efficiency, durability, installation difficulty and appearance. In this article we will take a closer look at both of these axles to see how they compare.

Key Features

The Dana Super 60 axle is designed with larger axle dimensions than its predecessor, allowing for greater strength and increased load capacity. It also comes with a variety of gear types to choose from including ring and pinion sets, limited slip differentials and locking hubs. The Dana 60 axle is typically used for light-duty applications such as off-road vehicles or tow vehicles.

Benefits

One of the main advantages of the Dana Super 60 is its durability. The larger axle dimensions allow it to handle heavier loads than its predecessor and it is also more resistant to wear and tear due to its enhanced design. Additionally, the cost efficiency of this axle makes it an attractive option for those looking for an upgrade from a standard Dana 60 axle but not wanting to break their budget.

Drawbacks

The main drawback of the Dana Super 60 is its appearance. While it has a sleek design that some may find appealing, others may find it too bulky or unsightly on their vehicle. Additionally, installation can be difficult due to the larger size and weight of this axle compared to the standard Dana 60.

Design

The design of the Dana Super 60 includes larger axle dimensions than those found on the standard Dana 60 axle. This allows it to handle heavier loads as well as provide additional ground clearance when compared with its predecessor. Additionally, there are various gear types available including ring & pinion sets, limited slip differentials and locking hubs depending upon your needs when upgrading from a regular Dana60 axle.

Maintenance Requirements

When considering maintenance for your upgraded Dana Super60 axle there are few basic things you should keep in mind such as lubrication and reinforcement options depending on your driving conditions or environment you drive in most often. Regular lubrication helps ensure optimal performance while reinforcement can help protect against excessive wear & tear or damage caused by off-roading or other extreme driving conditions common with this type of upgraded differential system.

Dana Super 60 Vs Dana 60

The Dana Super 60 and the Dana 60 are two very popular drivetrain components that have been used together for many years. Both axles offer a great combination of strength, weight capacity, and gearing options for off-road vehicles. But which one is best for your application? Read on to find out more about the differences between the two.

How to Install a Dana Super 60

Installing a Dana Super 60 is relatively simple, although some tools may be required depending on your specific setup. Generally, you’ll need some basic hand tools such as wrenches and screwdrivers, along with any specialty tools needed for your vehicle.

First, you’ll need to remove the factory differential cover and drain any remaining fluid from the axle. Once this is done, you can remove the existing differential assembly and replace it with the Dana Super 60. Make sure all of the mounting bolts are properly tightened before moving on to the next step.

Next, you’ll need to install the universal joints onto either side of the axle and bolt them into place using the supplied hardware. Finally, fill up your differential with new fluid and replace any worn-out seals or gaskets before reinstalling the cover. After that, you’re all set!

Component Variations of Dana Super 60

Dana Super 60s come in a variety of different configurations depending on your needs. Differentials are available in open or limited slip designs, as well as several different gear ratios for optimal performance in various conditions. Additionally, universal joints come in a variety of sizes and styles depending on how much articulation you need from your axle shafts.

Where to Find a Dana Super60

Finding a Dana Super60 is relatively easy these days thanks to modern technology! You can find them both online through various vendors or at local stores that specialize in off-road parts and accessories. Be sure to check out reviews before purchasing any components as some are known to be more reliable than others.

Advantages of the Dana60 Over The Super60

When comparing these two axles side by side there are several advantages that stand out when choosing between them. For starters, they both offer excellent gearing strength but when it comes down to weight capacity theres really no competition; The Dana60 is significantly stronger than its counterpart due to its larger diameter axle shafts and overall design. Additionally, its gearing ratios also provide better torque multiplication over shorter wheelbase vehicles which helps with acceleration off-road.

FAQ & Answers

Q: What are the key features of the Dana Super 60?
A: The Dana Super 60 is a heavy-duty off-road axle designed for use in high performance applications. It has a larger diameter than the Dana 60, allowing for more torque capacity and higher ground clearance. It also features an improved differential setup with larger bearings, forged steel axle shafts, and reinforced bracketry for increased strength and durability.

Q: What are the benefits of the Dana Super 60?
A: The Dana Super 60 offers increased durability and cost efficiency when compared to other axle options. Its design allows for smoother operation with less vibration, improved traction, and better fuel economy. Additionally, it is lightweight yet strong enough to handle tough off-road conditions.

Q: What are the drawbacks of the Dana Super60?
A: The main drawback of the Dana Super60 is its appearance. It lacks some of the aesthetic appeal that other aftermarket axles offer due to its utilitarian design. Additionally, installing a Dana Super60 can be more difficult than other axles due to its larger size and heavier weight.

Q: What components make up a Dana Super 60?
A: The components that make up a Dana Super60 include an axle shaft, differential housing, universal joints, bearings, gears, and various reinforcement brackets. Differentials and universal joints come in a variety of sizes depending on specific applications and needs.

Q: Where can I find a Dana Super 60?
A: You can find a Dana Super60 at many online stores or local retailers that specialize in off-roading equipment. Additionally, there are several aftermarket suppliers who offer custom-built variants of the Dana Super60 for those who require specific features or sizing.

The Dana Super 60 and the Dana 60 are both solid axle assemblies that have been used in various vehicles over the years. The Dana Super 60 is a slightly more modernized version of the classic Dana 60, featuring an increased pinion size for increased torque and strength. The Super 60 also features larger steel bearing caps for improved durability. Both axles are well-built, reliable assemblies that will provide good performance and dependability when used in a variety of applications.