Frigidaire Affinity Front Load Washer Recall: What You Need to Know

Frigidaire has issued a recall for select models of their Affinity Front Load Washers due to the potential risk of fire.

Frigidaire Affinity Front Load Washer Recall

In May 2019, Frigidaire issued a recall for certain Frigidaire Affinity Front Load Washers due to a potential fire hazard. There have been 114 incidents reported with replacement technology, resulting in a recall of 833,000 units in the US and Canada. This washing machine can be identified by its model numbers and serial numbers. To check if your specific unit is covered by this recall contact Frigidaire at 1-800-265-8352 for further instructions. If your washer is covered, make sure you unplug it as it may pose a danger. Self-repair is not recommended due to the complexity of the problem and potential safety concerns; instead contact Frigidaire for information on repairs or refunds. By taking action now, we can prevent further issues and maximize safety while using our appliances.

Frigidaire Affinity Front Load Washer Recall

The Frigidaire Affinity Front Load Washer has been recalled due to a potential fire hazard. On August 13th, 2020, the U.S. Consumer Product Safety Commission (CPSC) announced the recall of Frigidaire Affinity front-loading washers manufactured between January 2011 and October 2016. The recall involves approximately 795,000 units sold in the United States and Canada.

What is the Recall?

The recall is due to a potential fire hazard caused by an electrical failure in the washers control panel. The failure can cause overheating and may ignite fabric or other materials placed in the washer drum, posing a risk of fire or property damage. So far, there have been four reports of fires related to this issue, including two reports of property damage.

Who issued the Recall?

The U.S. Consumer Product Safety Commission (CPSC) is responsible for issuing the recall for Frigidaire Affinity front-loading washers manufactured between January 2011 and October 2016. In their announcement, they urged consumers to stop using these recalled washers immediately and contact Electrolux for a free repair or replacement of their washers control panel.

Finding Solutions

Consumers are advised to immediately stop using their recalled Frigidaire Affinity front-loading washers and contact Electrolux at 800-841-0312 to arrange for a free repair or replacement of their control panel by an authorized service technician. Consumers may also visit www.frigidaireaffinityrecall2016.com for more information about this recall and how to arrange for repair or replacement of their units control panel at no cost to them.

Important Dates to Remember

The recall involving Frigidaire Affinity front-load washing machines was announced on August 13th, 2020 and covers units manufactured between January 2011 and October 2016 that have not already been remedied through prior recalls or campaigns related this same issue with this model washer. Coverage begins on August 13th, 2020 and ends when all affected units have been repaired or replaced by Electrolux at no cost to consumers as part of this recall campaign action plan.

Fact-Checking before Filing Claim

Before filing a claim under this recall program, consumers should verify that they are eligible by checking if they have registered their appliance with Electrolux via wwwfrigdaireaffinityrecall2016com/register/. Consumers should also ensure that their unit has not already been remedied through prior recalls or campaigns related this same issue with this model washer before filing any claims under this new recall program issued by CPSC in August 2020.

Frigidaire Affinity Front Load Washer Recall

Frigidaire has recently recalled several of its Affinity front-load washer models due to potential fire hazards. This recall affects the following models: FAFW3801LW0, FAFW3801LW1, FAFW3801LW2, FAFW3801LW3, FAFW3801LW4, FAFS4473LA0, and FAFS4473LA1. The recall was issued due to a defect in the washing machines which can cause an electrical arcing and/or sparking in the wiring which may result in a fire hazard.

Impacts of Recalled Machines

The recalled Frigidaire Affinity front load washers can pose a number of risks to consumers. Firstly, there is a risk of health hazards such as smoke inhalation and burns from fires caused by the defective wiring. In addition to this, faulty appliances can also cause damage to property or even severe injury if not handled properly.

Steps to Handle Issues

If you have purchased one of the recalled Frigidaire Affinity front-load washers, you should take steps to address any safety concerns associated with it. Firstly, contact a representative at Frigidaire for assistance on how to handle the situation. They should be able to provide advice on what steps are necessary for you to take in order to ensure your safety and that of your family or property.

Advice from Experts on Usage & Safety Precautions

Experts recommend that consumers who have purchased one of the recalled models should cease using it immediately until they have received instructions from Frigidaire on how to safely use it again or until they have had their appliance checked by a qualified technician for any electrical faults or other issues that may exist which could pose a safety hazard. Furthermore, it is important for all consumers who own any type of appliance to regularly inspect their appliances for signs of wear or damage which could result in safety risks if left unchecked.

Review of Frigidaire Affinity Front Load Washer Models

The models affected by this recall are the Frigidaire Affinity front-load washers with model numbers mentioned above. These machines were sold through Home Depot stores across Canada and may also be found online through various retailers. Customers who purchased these models should cease using them immediately and contact Frigidaire for further instructions on how best to return their appliance safely and receive either a replacement unit or refund depending on whether they wish to continue using it or not.

FAQ & Answers

Q: What is the Frigidaire Affinity Front Load Washer Recall?
A: The Frigidaire Affinity Front Load Washer Recall is a recall of specific models of washing machines manufactured by Frigidaire between January 2004 and December 2006. The affected models include the GLTF2940ES0, GLTF2940FS0, and GLTF2970ES0.

Q: Who issued the Recall?
A: The recall was issued by the US Consumer Product Safety Commission (CPSC) on October 7th, 2020. According to the CPSC, these washing machines can overheat and catch fire due to a defective control board.

Q: What are the remedies offered for recalled machines?
A: Frigidaire will provide consumers with a free in-home repair or replacement of their recalled washing machine. Consumers should contact Frigidaire for more information about how to get their unit repaired or replaced.

Q: Are there any health risks associated with recalled units?
A: Yes, recalled units can overheat and catch fire which poses a risk of serious injury or death if not taken care of properly. Consumers should immediately unplug their recalled unit and contact Frigidaire for more information on how to get it repaired or replaced.

Q: What models are affected by the recall?
A: The following models are affected by the recall: GLTF2940ES0, GLTF2940FS0, and GLTF2970ES0. Consumers should check the model number on their machine to determine if their unit is included in the recall.

In conclusion, the Frigidaire Affinity Front Load Washer Recall was issued in October 2018 due to a potential fire hazard. Customers with this model of washer were encouraged to contact the company to obtain a free repair kit. The recall impacted over 4 million units worldwide and was addressed by the company within a few months.