How to Clear EEC 61 Code: A Step-by-Step Guide for Beginners

The EEC 61 code should be cleared by using an OBD-II diagnostic scanner.

How To Clear Eec 61 Code

Clearing an EEC-61 code can seem like a daunting task, but it doesn’t have to be. With the right diagnostic tools and know-how, it’s possible to easily and successfully clear this code. This tutorial provides step-by-step instructions on how to quickly clear the EEC-61 code. Start by plugging a diagnostic tool into the cars OBD2 port and check for any errors indicated by the tool. Next, reset any stored trouble codes and remove the key from the ignition before retesting the vehicles electronics components. Finally, clear any codes that have been stored in memory by using an OBD2 scanner with an EEC-61 software download feature. Clear these codes with confidence knowing that these steps are designed to solve your EEC-61 dilemma quickly and accurately.

Preparing For an EEC Code Clear

When preparing to clear an EEC 61 Code, there are certain tools that need to be gathered in order to complete the process. First and foremost, it is necessary to check the malfunction codes that have been stored in the computer. This can be done with a code reader/scanner and will help determine what exactly needs to be cleared. Additionally, it is important to clean the connectors of any dirt or debris that may be present. This can be accomplished by disconnecting the negative battery cable and then using a wire brush to clean the connectors.

Retrieving Stored Codes from the Computer

Once the connectors have been cleaned, a scanner/reader tool needs to be plugged in order to retrieve any stored codes from the computer. After obtaining these codes, they need to be interpreted correctly in order for them to be cleared properly. Depending on the type of computer being used, there may be different methods for interpreting these codes.

Clearing The EEC 61 Code

In order to clear an EEC 61 Code, a 2000+ OBD2 code reader/scanner or Ford Proprietary Software may need to be used depending on what type of computer is being used. Using either of these methods should allow for successfully clearing the code and resetting any check engine lights that may have been triggered as a result of this code being present.

Resetting The Check Engine Light

Once all of the necessary steps have been taken in order to clear an EEC 61 Code, it is necessary to reset any check engine lights that were triggered as a result of this code being present. This can typically be done using a scanner/reader tool which will allow for easy resetting of this light without having to take additional measures such as performing basic electrical tests on battery systems or fuses.

Verifying that EEC 61 Code is Cleared

In order to verify that the EEC 61 code has been cleared, it is important to inspect the scan data stored on the ground cable. This data will tell you if the code has been cleared or not. If it is still present, then further action needs to be taken.

Disregard Any Stored Memory Scan Data from Ground Cable

It is important to disregard any memory scan data stored on the ground cable when attempting to clear an EEC 61 code. This data can be outdated and may not accurately reflect the current state of the vehicle’s system. Therefore, it should not be relied upon when diagnosing a problem with a vehicle’s EEC 61 system. Instead, use a diagnostic tool to accurately determine whether or not the code has been cleared.

A diagnostic tool can help to quickly and accurately diagnose any issues with the vehicle’s EEC 61 system. It can also provide information about what components are faulty and what needs to be replaced in order to resolve the issue. This information can then be used to make any necessary repairs or replacements in order to clear the EEC 61 code and get the vehicle back up and running again.

FAQ & Answers

Q: What tools do I need to prepare for an EEC code clear?
A: You will need a wire brush and a 2000+ OBD2 code reader/scanner to clear the code. You may also need a scanner to read the fault codes or Ford proprietary software to clear the code.

Q: How do I clean the connectors?
A: Begin by disconnecting the negative battery cable. Then, use a wire brush to clean any dirt or debris from the connectors.

Q: How can I retrieve stored codes from the computer?
A: Plug in a scanner to read the fault codes and interpret any obtained codes.

Q: How do I reset the check engine light?
A: Use a scanner/reader tool to reset the check engine light. You may also need to perform a basic electrical test on your battery system and fuses.

Q: How do I verify that the EEC 61 code is cleared?
A: After clearing the code, disregard any stored memory scan data from ground cables. Additionally, you can use your OBD2 reader/scanner to verify that your code has been cleared.

The best way to clear an EEC 61 code is to first determine what the code is indicating. Once you know the cause of the code, you can then take the necessary steps to repair or replace any faulty components or wiring. Depending on the severity and complexity of the issue, it may be necessary to consult a professional technician for assistance. If all else fails, resetting the computer system may be necessary. No matter what, it is important to address an EEC 61 code promptly in order to avoid further damage or costly repairs.