Is 5×135 Wheel Bolt Pattern the Same as 5×5.5? An In-Depth Look

No, 5X135 is not the same as 5X5.5.

Is 5X135 The Same As 5X5.5

No, 5×135 and 5×5.5 are not the same measurements. 5×135 is a bolt pattern specifically used in Ford vehicles. It indicates that there are five bolt holes spaced 135 millimeters apart from one another. On the other hand, 5×5.5 is a measurement commonly used in other vehicles and indicates that there are five bolt holes spaced 5.5 inches apart from one another. In other words, the 5×135 has a smaller spacing of bolt holes than the 5×5.5. Both measurements refer to a circle with a diameter of 110 mm but have different bolt patterns and fit different vehicles respectively.

Is 5X135 The Same As 5X5.5?

When it comes to wheel bolt patterns, the two most common sizes are 5×135 and 5×5.5. Though they may look similar, these two sizes are not the same, and they serve different purposes. When selecting a wheel bolt pattern, it is important to understand the difference between these two sizes and what each one offers for your vehicle.

Definition

The first number in a wheel bolt pattern denotes the number of lug holes that are on the wheel, while the second number indicates the measurement of the diameter of an imaginary circle that is formed by those lug holes. Therefore, a 5×135 pattern has five lug holes with a 135-millimeter diameter circle created by those five lugs. A 5×5.5 pattern also has five lug holes but with a diameter of only 55 millimeters, making it much smaller than its counterpart.

Application

The 5×135 pattern is more commonly used for larger vehicles such as SUVs, trucks and vans while the 5×5.5 pattern is usually found on smaller cars like sedans or coupes. This size difference is due to the fact that larger vehicles require stronger wheels in order to carry heavier loads without damage or deformation over time; therefore, they typically require larger wheels with bigger bolt patterns that offer more stability and strength than smaller ones can provide.

Similarity and Difference

Though both patterns are made up of five lug holes, their differences in size make them incompatible with one another; a wheel with a 5×135 pattern will not fit onto a vehicle with a 5×5.5 pattern, and vice versa. Additionally, because of their size differences, wheels from different manufacturers may not fit onto one another regardless of their having the same bolt pattern; this is because each manufacturer produces wheels slightly differently from one another in terms of dimensions and other factors which can affect compatibility between wheels from different brands or models altogether.

Difference In Use Case

Since these two sizes have different applications and cannot be used interchangeably on all vehicles, its important to check which size your vehicle requires before purchasing any new wheels or rims for it; using an incorrect size may result in damage to your car or even cause safety issues while driving due to instability caused by an improper fitment between your rims and your cars axle hub assembly.

Tools Required

In order to determine which size you need for your cars wheels or rims you will need some tools such as a measuring tape or ruler as well as some basic knowledge about how to measure bolt patterns correctly in order to get an accurate result when selecting new tires or rims for your cars wheelset.

Steps To Measure Bolt Patterns

In order to measure your vehicles specific bolt pattern you will need to:

1) Start by measuring from the center of one lug hole straight across to the center of its opposite partner on the opposite side; this distance should give you half of your total measurement for that particular bolt circle diameter (BCD).

2) Then measure from one corner lug hole directly across diagonally through its opposite partner on the other side; this should give you your full BCD measurement which will help you determine if you have either a 5×135 or a 5×5.5 setup on your vehicles axle hub assembly depending on what numbers you get when measuring out each dimension respectively.

3) Finally record all measurements taken so that you can double check them once more before purchasing new tires or rims for your cars wheelset; this will help ensure accuracy when selecting compatible parts for installation onto your vehicle so as not to run into any compatibility issues down the line when driving around town or taking long trips away from home.

5X135 Specifications

A typical setup using this type of wheel bolt pattern would include:

Size: Five Lug Holes With A 135 Millimeter Diameter Circle Created By Those Five Lugs

Thread Pitch: 12mm X 1mm
Knowing these specifications can help make sure that any tires or rims purchased adhere strictly to these parameters so as not to run into compatibility issues down the line when installing them onto your car’s axle hub assembly later on down the road after purchase has been completed successfully without any problems arising during installation due to incompatibility between parts purchased separately at different times before installation takes place

Is 5X135 The Same As 5X5.5?

When it comes to vehicle wheels, two of the most common sizes are 5×135 and 5×5.5. While these two sizes may appear to be similar, they are actually quite different. It is important to understand the differences between these two sizes in order to ensure that you purchase the right wheels for your vehicle.

5X135 Specifications

The 5×135 size consists of a wheel diameter of 5 inches and a thread pitch of 135 mm. This size is primarily found on Ford pickups and Jeep Grand Cherokee Wranglers. Common manufacturers of wheels in this size include American Racing and Vision Wheels.

5X5.5 Specifications

The 5×5.5 size consists of a wheel diameter of 5 inches and a thread pitch of 5.5 mm. This size is primarily found on Jeep CJs and Chevy 2500 & 3500 trucks. It is important to note that the thread pitch in this size is significantly smaller than in the 5×135 size, making them incompatible with one another.

Conclusion

In conclusion, it is important to understand the difference between these two sizes when purchasing new wheels for your vehicle. The 5×135 wheels are designed for Ford pickups and Jeep Grand Cherokee Wranglers, while the 5×5.5 wheels are designed for Jeep CJs and Chevy 2500 & 3500 trucks. Make sure that you purchase the correct set of wheels for your vehicle in order to ensure proper fitment and performance.

FAQ & Answers

Q: What is 5×135?
A: 5×135 is a wheel bolt pattern consisting of five bolts with a diameter of 135 mm. It is most commonly used for Ford pickups and Jeep Grand Cherokee Wrangler vehicles.

Q: What is 5×5.5?
A: 5×5.5 is another wheel bolt pattern consisting of five bolts with a diameter of 5.5 mm. It is most commonly used for Jeep CJ, Chevy 2500 & 3500 trucks, and other vehicles.

Q: Are 5×135 and 5×5.5 the same?
A: No, they are not the same. Although both have five bolts, the diameters are different, so they are not interchangeable.

Q: What tools are needed to measure wheel bolt patterns?
A: To measure wheel bolt patterns you will need a ruler or tape measure, calipers, or a wheel bolt pattern gauge to determine the number of lugs and their spacing accurately.

Q: What are the specifications for 5X135 and 5X5.5 wheels?
A: The specifications for 5X135 wheels are five bolts with a diameter of 135 mm and thread pitch of 1/2-20 or 1/2-24 UNF, depending on the vehicle model. The specifications for 5X5.5 wheels are five bolts with a diameter of 5.55 mm and thread pitch of 1/2-20 UNF or 9/16-18 UNF, again depending on the vehicle model.

No, 5X135 and 5X5.5 are not the same. The 5X135 bolt pattern is typically found on Ford F-150 trucks, while the 5X5.5 bolt pattern is typically found on Jeep Wranglers and other off-road vehicles. Both patterns require different wheel sizes, so they are not interchangeable.