Are 8×170 and 8×6.5 Wheels Interchangeable? – A Guide to Wheel Sizes

No, 8X170 is not the same as 8X6.5.

Is 8X170 The Same As 8X6 5

No, 8×170 and 8×6 5 are not the same. The sizes refer to two different wheel applications. 8×170 is typically found on trucks, while 8×6 5 is usually used on passenger cars. The terms “8×170” and “8×6 5” refer to the numbers of studs and the bolt pattern respectively. An 8 stud wheel with a 170mm bolt pattern would have eight studs, each measuring 170mm apart from one another. In contrast, an 8 stud wheel with a 6 5mm bolt pattern would have eight studs, each measuring 6 5mm apart from one another. By taking into account the differences in these measurements, it is clear that the two wheel measurements are not the same.

What Is 8X170?

8X170 is a bolt pattern, or lug pattern, used in the automotive industry. It is comprised of 8 lug holes arranged in an alternating pattern on a circle with a diameter of 170mm. This lug pattern is commonly used for heavy-duty applications such as for mounting wheels on oversized trucks and other off-road vehicles. It is also sometimes referred to as “8 on 170” or “8X170mm”.

Applications

The 8X170 bolt pattern is primarily used for mounting wheels on heavy-duty trucks and off-road vehicles. It has also become popular in aftermarket applications, where it can be found on some custom street rods and hot rods. The 8X170 bolt pattern is becoming increasingly popular with 4×4 enthusiasts who are building custom off-road rigs.

What Is 8X6 5?

8X6 5 is another common bolt pattern that is primarily used for mounting wheels on smaller sedans, SUVs, and light trucks. It consists of 8 lug holes arranged in an alternating pattern on a circle with a diameter of 6 5 inches (165mm). This lug pattern is sometimes referred to as “8 on 6 5” or “8X165mm”.

Applications

The 8X6 5 bolt pattern is typically used for mounting wheels on smaller sedans, SUVs, and light trucks. It can also be found in aftermarket applications such as custom street rods and hot rods. The 8X6 5 bolt pattern has become increasingly popular with 4×4 enthusiasts who are building custom off-road rigs.

Are 8X170 And 8X6 5 The Same?

Although both the 8X170 and the 8X6 5 bolt patterns consist of eight lug holes arranged in an alternating pattern, they are not the same. The biggest difference between them is the diameter of the circle they are arranged around: 170mm for the 8×170 and 165mm for the 8×6 5. This difference may seem minor but it makes it impossible to interchangeably use rims from one standard to another without modification or adapter plates being used.

Bolt Specifications For 8X170 And 8X6 5

In order to properly mount a wheel onto either one of these standards correctly, it is important to use bolts that match each standard’s specification:

• Bolt Specifications For 8×170:

For this standard, you will need 17mm bolts with an overall length of 1 75 inches (44 7 mm). These bolts should have either a flat head design or conical seat design with a shank diameter of 14 7 mm (0 58 inches).

• Bolt Specifications For 8×65:

For this standard you will need 16mm bolts with an overall length of 1 75 inches (44 7 mm). These bolts should have either a flat head design or conical seat design with a shank diameter of 12 7 mm (0 48 inches).

Interchangeability Between 8×170 And 8×65 Standards

Although it may be possible to use adapters plates to mount rims from one standard onto the other, this practice can lead to potential problems such as incorrect fitment due to differences in offset measurements or unsafe conditions due to improper torque values being applied during installation or removal procedures. Therefore it’s generally not recommended to interchangeably use rims from one standard onto the other without using adapter plates that are specifically designed for that purpose and have been tested by qualified personnel before installation.

The advantages of using interchangeable standards include increased availability of compatible parts and compatibility across different vehicle types without having to modify existing components along with increased ease when finding compatible parts online at sites like eBay Motors which list information about compatible parts based on particular standards like 8×6 5 or 8×170″. The disadvantages include potential problems due to incorrect fitment caused by differences between offsets measurements between different standards and potential unsafe conditions due to improper torque values being applied during installation or removal procedures if not done correctly according to manufacturer specifications which may require special tools or expertise beyond what most individuals possess at home garages/workshops

Is 8X170 The Same As 8X6 5

When it comes to thread diameter and length, the answer is no. 8X170 and 8X6.5 are two different standards that are used in various applications.

Dimensions of 8X170 Vs. Dimensions Of 8X6 5

The standard 8X170 has a thread diameter of 8mm, whereas the standard 8X6.5 has a thread diameter of 6.5mm. Both standards have a thread length of 170mm, which means that they both have the same overall length but different thread diameters. This difference in thread diameters is what makes them incompatible with one another.

Compatibility Of Tires With Each Standard

When it comes to compatibility with tires, the standard 8X170 is not compatible with tires that use the standard 8X6.5 because their thread diameters are different. On the other hand, tires that use the standard 8X6.5 are compatible with wheels and rims that use the same standard, but they will not be compatible with wheels and rims that use the standard 8X170 as their thread diameters will not match up correctly.

Applications of 8×170 & Applications of 8×6.5

The standard 8X170 is commonly used in industrial applications such as heavy machinery and construction equipment, as well as for automotive uses such as trucks and off-road vehicles. On the other hand, the standard 8X6.5 is typically used for smaller vehicles such as passenger cars and light trucks due to its smaller size and weight limits when compared to its larger counterpart.

FAQ & Answers

Q: What is 8×170?
A: 8×170 is a wheel bolt pattern or bolt circle with 8 evenly spaced lugs on a circle with a diameter of 170 millimeters. It is commonly used in the automotive industry for larger vehicles such as SUVs and trucks.

Q: What is 8×6.5?
A: 8×6.5 is a wheel bolt pattern or bolt circle with 8 evenly spaced lugs on a circle with a diameter of 6.5 inches (165.1 mm). It is commonly used in the automotive industry for larger vehicles such as SUVs and trucks.

Q: Are 8×170 and 8×6.5 the same?
A: No, 8×170 and 8×6 5 are not the same since they have different diameters (170mm versus 165.1mm). However, they are interchangeable depending on the application and vehicle type, which means that an 8×170 lug can be used as an alternative for an 8×6 5 lug in certain applications or vehicles.

Q: What are the bolt specifications for 8×170 and 8×6 5?
A: The typical bolt specifications for an 8×170 lug nut are M14 x 1.5 x 40mm or M14 x 1.5 x 42mm, while the typical bolt specifications for an 8×6 5 lug nut are M12 x 1.75 x 35mm or M12 x 1.75 x 40mm.

Q: What are the dimensions of 8×170 vs dimensions of 8×6 5?
A: The thread diameter and length of an 8X170 lug nut is typically 14mm by 40-42mm, while the thread diameter and length of an 8X6 5 lug nut is typically 12mm by 35-40mm

No, 8X170 is not the same as 8X6 5. 8X170 refers to a specific bolt pattern and size, usually used in larger vehicles such as trucks or vans, while 8X6 5 refers to a different bolt pattern and size, typically used in smaller vehicles such as cars.