The filter on the Kenmore Series 700 Washer is located in the lower left corner, behind a small access panel.

Kenmore Series 700 Washer Filter Location

The Kenmore Series 700 Washer is a popular model for homeowners and those looking for an easy-to-use washing machine. Fortunately, cleaning and maintaining this washer is straightforward. On this model, the filter can be found at the base of the machine near the back panel. The filter should be checked periodically to ensure it is not clogged with lint and other small particles that can collected during a wash cycle. This can clog the machines pump and cause damage to your clothes or the washer itself. Accessing the filter is simple; just make sure that you have disconnected the washers power source before you begin. Then, remove the back panel to access and check out the condition of your filter. Cleaning or replacing it as needed will help keep your Kenmore Series 700 Washer running at its best.

Filter Location

The Kenmore Series 700 washer has a filter located behind the lower access panel, on the left side of the washer. This filter is used to help remove lint, dirt, and other particles from the wash water. It is important to check and clean this filter regularly in order to maintain optimal performance of your washer.

The procedure for cleaning the filter is relatively simple and straightforward. First, you will need to unplug the washer from its power source and then locate the access panel on the left side of your washer. Once located, you can unscrew the screws holding it in place and remove it. Inside you will find the filter which can be pulled out and inspected for any debris or buildup. If necessary, use a damp cloth or sponge to gently remove any dirt or debris that may have accumulated on it before replacing it back into the washer.

Once finished, replace the access panel and securely fasten it with screws before plugging your washer back into its power source. It is important to remember that this process should be done regularly in order to keep your washer running optimally and ensure that no lint or dirt gets into your wash water.

Troubleshooting

When troubleshooting an issue with a Kenmore Series 700 Washer, there are several common issues that should be looked for first before proceeding further:
1) Check for any clogged hoses or filters which may need cleaning;
2) Check for loose connections between hoses;
3) Make sure all electrical components are securely connected;
4) Check if there is an issue with power supply or voltage;
5) Ensure proper levels of detergent are being used; and
6) Check if there is an issue with water pressure.
If none of these issues appear to be present, then more complex issues such as those involving internal parts may need further investigation by a qualified technician.

Maintenance Tips

Regular maintenance is essential in keeping your Kenmore Series 700 Washer running properly over time. There are several things you can do on a regular basis to help maintain its performance:

Deep Cleaning Procedure – Every few months it’s recommended that you run an empty cycle with hot water and 1 cup of vinegar in order to thoroughly clean out any buildup inside the drum as well as help reduce odors in your machine.

Troubleshooting Routine Maintenance Issues – If you’re experiencing issues with your washer such as strange noises or vibrations when spinning, one thing you can do would be to inspect all hoses for any kinks or blockages which could cause air flow restriction resulting in these problems. Additionally, inspect all moving parts such as belts for signs of wear or damage which could also cause similar problems if not replaced promptly when needed.

FAQs

Q: Is This Washer Energy Efficient?
A: Yes! The Kenmore Series 700 Washer has an Energy Star rating which makes it very energy efficient compared to other models on the market today!
Q: How Often Should I Change The Filter?
A: It’s recommended that you change out or clean your filter every 3-6 months depending on how often you use your machine in order to keep it performing optimally over time!

Kenmore Series 700 Washer Filter Location

Replacement Parts

Finding original parts for the Kenmore Series 700 Washer can be a difficult task, especially for those who do not have access to the manufacturer or a local appliance store. Fortunately, there are several online retailers who offer replacement parts for the washer. It is important to know the difference between OEM (Original Equipment Manufacturer) and aftermarket replacement parts as they may not be as reliable as original parts. OEM parts are designed and built by the same company that originally manufactured the washer, so they are typically of higher quality and last longer than aftermarket parts. Aftermarket parts, on the other hand, are manufactured by third-party companies who are not affiliated with the original manufacturer. These parts may be cheaper but often do not last as long or perform as well as OEM parts.

Precautions for Working on Your Washer

When working on any appliance, it is important to take certain precautions to ensure your safety as well as that of your washer. Basic safety procedures should include wearing protective clothing such as gloves and safety glasses, unplugging the power cord from the wall outlet before beginning any work, and making sure all components are securely fastened before reassembling them. Additionally, it is important to have all necessary tools and materials on hand before beginning any work on your washer so you can complete it quickly and efficiently without having to stop in the middle of a job to find something you need.

FAQ & Answers

Q: What features does the Kenmore Series 700 Washer have?
A: The Kenmore Series 700 Washer features a variety of options such as a stainless steel wash tub, multiple temperature settings, and an adjustable agitator. It also comes with a number of special cycles including Sanitary, Delicates, and Allergen.

Q: Where can I purchase the Kenmore Series 700 Washer?
A: The Kenmore Series 700 Washer is available for purchase from select retailers. You can find it both in-store and online. Additionally, you can purchase parts and accessories for the washer from Sears PartsDirect.

Q: How often should I change the filter on my Kenmore Series 700 Washer?
A: It is recommended that you change the filter on your Kenmore Series 700 Washer every three to six months or as needed. This will help keep your washer functioning efficiently and reduce wear and tear on its components.

Q: Is this washer energy efficient?
A: Yes, the Kenmore Series 700 Washer is Energy Star certified and has an energy-efficient design that helps save you money on your electricity bills.

Q: Where should I look for the filter on my Kenmore Series 700 Washer?
A: The filter on the Kenmore Series 700 Washer is located at the bottom of the washtub near the drain hose connection. To access it, you will need to remove either two screws or two clips depending on your model.

In conclusion, the Kenmore Series 700 Washer Filter is located in the bottom of the washer tub. This filter should be checked and cleaned regularly to ensure optimal performance of the washer. Cleaning the filter will help improve water flow, reduce energy costs, and extend the life of your washer.