Solve Onkyo Tx-Sr313 No Sound From Rear Speakers Problem Easily

Check the surround sound settings and ensure that the rear speakers are enabled.

Onkyo Tx-Sr313 No Sound From Rear Speakers

Onkyo TX-SR313 is a popular home theater receiver known for its high-quality sound. Unfortunately, you might experience an issue with no sound coming from the rear speakers. This issue may be caused by several issues ranging from incorrect speaker setup to faulty wires. To troubleshoot this issue, first ensure that your speaker configurations are directly connected to the receiver. Next, ensure that you have selected the surround sound option in your receiver settings and the correct balance of speakers is set. You may also need to check all wires and connections to make sure they are not loose or defective. With some simple steps, you should be on your way to enjoying quality surround-sound audio from your Onkyo TX-SR313 once again.

No Sound from Speakers

Troubleshooting rear speakers on an Onkyo Tx-Sr313 can be tricky, especially if there is no sound coming from them. Investigating potential causes of no sound is the first step in resolving the issue. Firstly, its important to verify proper audio output from the TV or source device connected to the Onkyo receiver. If sound is still not coming through, check the rear speaker connectivity to confirm that all cables are firmly connected.

Onkyo Tx-Sr313 & Surround Sound System Setup

Getting a surround system set up properly requires configuring amplifiers and receivers correctly, as well as connecting speaker wires to the receiver in the right order. Its essential to make sure that all components of the system are connected properly in order for it to work correctly. Once everything is connected properly, its worth checking that the wattage setting for each speaker is correct in order for them to work optimally.

Speaker Troubleshooting Tips & Tricks

In addition to checking connections and settings, it can also be helpful to test for volume output and impedance mismatch between speakers. When testing volume output levels, ensure that each speaker is at a similar level when playing music or movie audio tracks. Impedance mismatch can occur when one speaker has higher impedance than another, making it difficult for them both to receive a balanced level of signal from the amplifier or receiver.

Remote Control Errors with Onkyo Tx-Sr313

Finally, remote control errors can also be a common cause of no sound from rear speakers on an Onkyo Tx-Sr313 system. Testing remote batteries power level and signal strength can help identify whether this could be causing the issue or not. If necessary, replace batteries or reposition remote within line of sight of receiver in order to restore full functionality of remote control features.

Onkyo Tx-Sr313 No Sound From Rear Speakers

No sound from rear speakers can be a very frustrating issue, especially when you are trying to enjoy the full potential of your surround sound system. Fortunately, there are a few troubleshooting steps you can take to help identify and fix the problem.

Identifying Potential Audio Jack Issues on Onkyo Tx-Sr313

The first step to fixing no sound from rear speakers is to check the audio jacks on the Onkyo receiver. Confirm that the correct inputs and outputs are connected properly, as this will ensure that your system is working as intended. Additionally, check that all cables and connectors are compatible with your Onkyo TX-SR313 receiver.

Power Harmon Kardon System Setup Errors with Onkyo Tx-Sr313

If you have recently set up a Harmon Kardon system with your Onkyo receiver, then it is possible that errors may have occurred during installation. To help fix this issue, try calibrating audio channels properly and understanding speaker configuration settings. Make sure that all settings are configured correctly in order for the system to work correctly.

Troubleshooting Audio Delay on Onkyo Tx-Sr313

If you experience any sort of audio delay when using your Onkyo receiver, then it’s important to resolve lip sync issues as soon as possible. To do this, try optimizing audio options in the menu settings, such as turning off any automatic volume control or other similar functions. Additionally, make sure that all of your devices are connected correctly and not interfering with one another in any way.

Onkyo Tx Sr 313 And Connectivity With Wireless Surround Sound Systems

If you have recently purchased or are looking into purchasing a wireless surround sound system for use with your Onkyo TX-SR313 receiver, then it is important that you set up a WiFi connection and enable Bluetooth functionalities. This will ensure that all of your devices can communicate properly with each other for optimal performance.

FAQ & Answers

Q: How do I troubleshoot rear speakers on Onkyo Tx-Sr313?
A: First, you should check for any firmware updates. Then investigate potential causes of no sound and verify proper audio output from TV, check rear speaker connectivity. Additionally, you should check speaker wattage setting, test for volume output and impedance mismatch.

Q: What steps should I take to setup a surround sound system with the Onkyo Tx-Sr313?
A: You will need to configure the amps and receiver, as well as connect speaker wires to the receiver. Make sure that all connections are made properly and that the correct inputs and outputs are connected. Additionally, calibrate audio channels properly, understand speaker configuration settings, and optimize audio options in the menu settings.

Q: How do I resolve remote control errors with Onkyo Tx-Sr313?
A: You should test remote batteries power level and check signal strength. If they are both functioning properly but you still experience issues, try replacing the batteries or using a different remote control.

Q: Are there any potential audio jack issues on Onkyo Tx-Sr313?
A: Yes, it is important to confirm that the correct inputs and outputs are connected properly and that cables are compatible with the receiver. Additionally, double check all connections to make sure that everything is secure.

Q: How can I setup a Power Harmon Kardon system with Onkyo Tx-Sr313?
A: First, you will need to configure your WiFi connection as well as enable Bluetooth functionalities on both devices. Then make sure that your audio channels are calibrated properly as well as understand speaker configuration settings. Finally optimize audio options in the menu settings if necessary.

The Onkyo TX-SR313 is a great budget receiver, but if you’re not getting sound from your rear speakers, the problem could be with the wiring or the settings. To fix this, check all of your wiring connections and make sure that the rear speakers are enabled in your receiver’s menu system. If these don’t solve the issue, it’s possible that there may be a fault with the receiver itself and it should be serviced by a professional.

Author Profile

Liberty Is Viral Desk
Liberty Is Viral Desk
Welcome to our product analyst and reviewer platform! We're thrilled to have you here and appreciate your interest in knowing more about us.

Our mission is to provide you with honest and unbiased reviews of products and services, to help you make informed decisions before making a purchase. We understand the importance of finding the right products that meet your needs and budget, and we take that responsibility seriously.

We believe in transparency, honesty, and open communication. Our team of experienced product analysts and reviewers are dedicated to providing you with accurate and comprehensive information about the products we review. We do not accept any payments or incentives from manufacturers or companies to influence our reviews. We conduct extensive research, data comparison and analysis to ensure that our reviews are fair, honest, and unbiased.

Similar Posts